Description
Product details
R250 roundness tester was conceived from the need to characterize pieces with circular and even complex geometries with utmost accuracy, and it is the ideal instrument to satisfy multiple measurement needs in the mechanical, motor, aerospace and machine manufacturing industries. Thanks to its solid structure consisting of a base made in diabase and pneumostatically supported plate, it can accurately measure pieces of also considerable weight. The device is matched to Circom software that was conceived to be extremely user-friendly and easy to use, thus allowing to train an operator within a short period of time, reducing training and testing costs. The software allows to analyze the following geometric tolerances: roundness, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, coaxiality, run out, total run out, thickness variation. For complex surfaces where gaps are present, Circom is able to eliminate them automatically or the operator can intervene manually, removing inconsistent profile sections. Integrative packages can be added to the basic application, such as for example harmonic analysis that, through FFT algorithm, allows to analyze each single sinusoidal component of the measured profile, essential with regards to bearings. CHARACTERISTICS: Pneumostatic plate Platform diameter: 450 mm Expansion diameter: 800 mm Maximum measureable diameter: 1000 mm Axial bearing capacity: 1200 kg Radial run-out (at plate level): ≤0,1 μm Speed: 0,5 – 3 rpm (measurement) 0 – 6 rpm (positioning) Friction: Pneumostatic due to manual rotation Centring range: ±5 mm Levelling range: ± 1° Resolution: 0,1° Pneumostatic R axis Useful traverse length: 500 mm Linearity: ≤ 0,5 μm su 500 mm Speed: 0,2 – 10 mm/s Resolution: 0,1 μm C axis (pneumostatic column) Useful traverse length: 500 mm Maximum height : 600 mm (from plate surface) Linearity error: ≤ 0,5 μm on 500 mm Speed : 0,5 – 15 mm/s Resolution: 0,1 μm Pick-up Measurement positioning: In three positions (horizontal, vertical, lateral) Measurement strenght : Internal/esternal 20 – 150 mN Measurement range : ±1000 μm Supplied pick-ups : N° 3 two-directional of lenght 80 - 150 – 240 mm Salbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.