Home> Products> 115 mm

{ "products": [ { "_id": "6685548afcd2841c9c9ec3dd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 41, "imageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:22.21Z", "updatedon": "2024-07-03T13:39:22.21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//hommel-1000-seround-retrofit/41", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "66855489bb6dd81a38b9b1d4", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT-10 Plus", "description": "Palmtop Roughness Tester RT-10 Plus\n\n•\tTechnical specification\n•\tRoughness parameters according to ISO 4287: Ra, Rq, Rt, Rz, Rc, RSm, Rmr & Rmax Special.\n•\t4 roughness parameters according to ISO 12085: Pt, R, AR, Rx. Measuring length: up to 16 mm.\n•\tMeasurement range: ±20 µm and ±80 µm.\n•\tCut-off lengths: 0.25 – 0.8 – 2.5 mm.\n•\tGaussian filter according to ISO 11562.\n•\tDisplay: 16-character, 2-line LCD.\n•\tTouch keyboard of 4 keys.\n•\tRechargeable battery incorporated.\n•\tMulti language: Italian, French, English, German and Spanish.\n•\tBuffer of 30 measurements.\n•\tSerial data output.\n•\tGauge rotable through 90° for lateral measurements.\n•\tResolution 0.01 µm and 0.04 µm.\nThe portable, palmtop roughness tester RT-10 permits evaluation of the most varied roughness parameters directly on the site of production offering, in a compact package, the advantages of being easy to carry, simple to use and reliability of measurement.\n\nDesigned for use on the shop floor, it is shielded against external agents by a special protective membrane. It can measure in difficult positions, including when held in the hand, in the vertical traverse position. The gauge may be turned by 90° to permit measurements in grooves or between shoulders. The 400x250 mm measurement support in black granite with adjustable steel column can be used with RT-10 to measure pieces that are bulky or difficult to position.\n\nComplete Presentation of Results\n\nThis instrument can be connected to the PR-10, a 24-column printer providing certification both of the parameters measured, together with indication of the tolerances, and of the profile drawing. Using the serial output line, data can be downloaded to a Personal Computer running the Remote-10 program under Windows 98/ME/NT4/2K, XP with which measurements can be made, data processed, parameters displayed and drawings of the profile presented using various options. It has a buffer of 30 measurements which can be displayed and printed at any time. The most common functions, such as recalling results, or cut-offs and starting measurements, can be accessed directly using the keyboard, while others are available by activating suitable, easy to comprehend menus. Among other things, these menus permit the presetting of tolerance thresholds which, when linked to one of the measurable parameters, facilitate series checks.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "±80 µ", "16 mm", "0.04 µ", "4 keys", "±20 µm", "2.5 mm", "ISO 4287", "ISO 12085", "RT-10 Plus", "shop floor", "2-line LCD", "other things", "Rmax Special", "series checks", "black granite", "Touch keyboard", "suitable, easy", "Multi language", "30 measurements", "profile drawing", "various options", "external agents", "compact package", "Gaussian filter", "Cut-off lengths", "common functions", "Measuring length", "Remote-10 program", "Personal Computer", "24-column printer", "Measurement range", "Serial data output", "serial output line", "difficult positions", "production offering", "lateral measurements", "tolerance thresholds", "Rechargeable battery", "measurable parameters", "Complete Presentation", "4 roughness parameters", "Technical specification", "adjustable steel column", "vertical traverse position", "varied roughness parameters", "special protective membrane", "400x250 mm measurement support", "portable, palmtop roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/5f7b1ba199d7e200019867cd.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1ba199d7e200019867cd.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:21.626Z", "updatedon": "2024-07-03T13:55:42Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//rt-10-plus/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Surface Roughness Tester", "tags": [ "Portable Roughness", "Roughness", "Surface Roughness", "Surface Metrology", "Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6446742e82c0230001a5d489", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "TALYROND 252 Roundness Tester Retrofit", "description": "Note*-Machines displayed are Products/property of respective Manufactures. Machine Pictures used are to state compatibility of our Retrofit Package only.\n\nSeRound the Software Retrofit is user friendly, powerful and is performance driven. It is developed in-House at Salbro Engineers and has under gone years of field tests. It provides a through interactive user interface between the user and the Instrument. All Integrated to make one precise instrument to detect and assess the following results in Roundness, Concentricity, Eccentricity, Flatness (rotating 3D profile display), Cylindricity, Straightness, Parallelism, Squareness, Coaxiality and Radial Run-out, Axial Out, Harmonics.\n\nSeRound is proficient in Data acquisition, profile filtering, and assessment of the roundness parameters and graphical presentation of the results. It also performs instrument control. SeRound’s Setup and Measure window assists the user in accurately centering and leveling the job thus saving on time and improving productivity. The measuring process is initiated by the user by a mere click of a button and displaces measure completed’ massage at the end of measuring sequence. SeRound offers options to choose the method of calculation and assessment. Roundness and Flatness assessments are carried out on 4 internationally recognized reference circles (LSC, MIC, MCC and MZC). MZ Cylinder for Cylindricity analysis, LSL and MZ Lines for Straightness analysis., Operator is able to omit unwanted data and carry out analysis with remaining data. Measured data can be saved, retrieved and re-analyzed to any of the available conditions as desired by the user.\n\nA. MESUREMENT CAPACITY\n\n1. Maximum diameter : 350 mm (13.8 in) optionally(also see Para 9) \nextendable to 500 mm (19.7 in)2. Maximum Weight : 20 kg (44.1 lb)3. Maximum Height of assessable Surface : 300mm (11.8 in)4. Worktable Moment Loading : 120 kgmm (10.4 lbin)5. Maximum Eccentricity : 25mm (0.98in) along the load line\n\nB. WORKTABLE AND SPINDLE\n1. Worktable Diameter :190mm (7.5 in)2. Speed of Rotation : 6 rpm nominal, clockwise3. Range of Centering Nominal : ±1mm (±0.04in)4. Range of Leveling Nominal : ±4.1 mrad (±14 arc minutes)5. Height of neutral plane above Worktable : 20mm (0.79in)6. Roundness Limit of Error : Concentric Load 20kg (44.1 lb)(Departure from the least within 0.06 µm 0.0003µm/mmSquares circle at 6 rpm with height above worktable 0-50 u.p.r filter) (1.5 µin 0.3 µin/in)*7. Axial Error : 0.15µm (3.9 µin) maximum axial movement of worktable during one revolution.\n*These departures may be inwards and outwards\n\nC. VERTICAL STRAIGHTNESS UNIT\n1. Measurement Length : 300 mm (11.8in),2. Accuracy of stop Measurement : 0.5mm (0.02in)3. Speed of Traverse (for set-up) : (1) Joystick slow speed0-3mm/s (0-0.12 in/s) for approx 70% of joystick travel. (2) Computer controlled <3 mm/sec variable.4. Straightness limit of Error : In the measuring plane: (Minimum zone straightness at 1µm over 300 mm (40µin 1mm/sec (0.04 in/sec) with over 11.8in) 8.0mm (0.3in) cut off low pass filter5. Positional Control Uncertainty : ±100µm (±0.004in) for one single move.6. Internal Capacity : 150mm (5.9in) For Straightness Limiting conditions, Maximum length of continuous Minimum diameter clearance Internal surface that can be assessed 115mm (4.5in) depth in bores larger thanØ25mm (Ø1in)7. For Roundness assessment Internal bore penetration : 150mm (5.9in), 115mm depth in bore of Ø25mm\n***Internal penetration for other than ‘limiting condition’ depends on component geometry.\n\nD. RADIAL STRAIGHTNESS UNIT1. Traverse Length : 200mm (7.9in) This may be set for up to 50mm (1.97in) of travel past the spindle axis. Standard setting is 25mm past the spindle axis.2. Speed of Traverse : up to 2mm/sec3. Positional control uncertainty : ±50µm (±0.002in) for one single move.This is for both relative and absolute movements.\n\nE. GAUGE1. Standard Stylus Arm Length : 75mm (2.95”) effective length2. Range of Gauge movement with80mm Stylus Arm : 1.2mm (0.079in) Nominal F. ELECTRICAL SUPPLY\n\nMain Instrument Overall Weight : 279kg (615lbs)\nOverall Length : 760mm (29.9in)\nOverall Width : 760mm (29.9in)\nOverall Height : 1513mm (59.6in)\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "LSL", "MCC", "MIC", "LSC", "job", "end", "MZC", "time", "Note", "Setup", "years", "House", "button", "method", "options", "SeRound", "Machines", "Products", "property", "MZ Lines", "Harmonics", "Squareness", "Coaxiality", "mere click", "Radial Run", "MZ Cylinder", "calculation", "field tests", "Parallelism", "performance", "productivity", "Eccentricity", "compatibility", "Concentricity", "Measured data", "unwanted data", "remaining data", "Measure window", "Retrofit Package", "Data acquisition", "Machine Pictures", "Salbro Engineers", "following results", "measuring process", "profile filtering", "Software Retrofit", "measuring sequence", "instrument control", "Flatness assessments", "roundness parameters", "available conditions", "Cylindricity analysis", "Straightness analysis", "graphical presentation", "one precise instrument", "respective Manufactures", "interactive user interface", "rotating 3D profile display", "TALYROND 252 Roundness Tester Retrofit", "4 internationally recognized reference circles" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 44, "imageuri": "https://productimages.withfloats.com/actual/644674336e06d800016fc260.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/644674336e06d800016fc260.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-04-24T12:21:02.447Z", "updatedon": "2024-07-03T13:28:44Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talyrond-252-roundness-tester-retrofit/44", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Roundness Tester Retrofit", "tags": [ "Roundness Teste Retrofit Package", "Laboratary Roundness Tester", "Upgraded Software", "roundness", "Straightness", "Cylindricity", "Parallelism", "Flatness", "Relative Eccentricity", "eccentricity", "squareness", "Velocity Analysis", "Harmonics", "Axial Runout", "Radial Runout" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ea9974337d401000144bc8f", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R100 CNC Roundness tester", "description": "R100 roundness tester, based on an ''all in one'' logic, is immediately operative with just a few operations, and allows to characterize all circular geometries, also complex ones, present on a piece.\n\nThe device is matched to Circom software that was conceived to be extremely user-friendly and easy to use, thus allowing to train an operator within a short period of time, reducing training and testing costs.\n\nThe software allows the analysis of the following geometric tolerances: roundness, planarity, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, squareness, angularity, coaxiality, run-ou, total run out, thickness variation.\n\nFor complex surfaces where gaps are present, Circom is able to eliminate them automatically or the operator can intervene manually, removing inconsistent profile sections.\n\nIntegrative packages can be added to the basic application, such as for example harmonic analysis that, through FFT algorithm, allows to analyze each single sinusoidal component of the measured profile, essential with regards to bearings.\n\nAxis of C plate: \t\nPlate diameter 160 mm\nMaximum load 200 N\nMaximum measured diameter 300 mm\nCentring and levelling: ± 3mm -- ± 2°\nRoundness error: < 0,08 μm\n\nAxis of Z column: \t\nUseful traverse lenght: 350 mm\nMotorized and measurement\nLinearity error on 400 mm: 0,8 μm\nLinearity error on 100 mm: 0,3 μm\nMeasurement speed: 0,5-1-2 mm/s\nPositioning speed: 0-15 mm/s\n\nAxis of R arm: \t\nUseful traverse lenght: 115 mm\nMotorized, positioning\nPositioning speed: 0-15 mm/s\nCalculated parameters: roundness, planarity, linearity, cylindricity, conicity, cone shape, concentricity, \nparallelism, squareness, angularity, coaxiality, run-out, total run out, thickness variation.\n\nPick-up: Two-directional with safety feature against shocks\n\nMeasurement range: 0,6 mm\nResolution: 0,001 µm\nSizes: 586 x 615 x 815 mm (L x P x H)\nWeight: 105 kg\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 20, "imageuri": "https://productimages.withfloats.com/actual/63c7ca1c59521a0001841fc1.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7ca1c59521a0001841fc1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-04-29T15:03:31.194Z", "updatedon": "2024-07-04T09:34:19Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//r100-cnc-roundness-tester/20", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness", "Concentricity", "Parallelism", "Cylindricity", "Diameter", "Perpendicularity", "Surface Metrology", "Thickness variation", "New Roundness and Cylindricity", "roundness tester", "Roundness Measuring", "roundness measurement", "Cylindricity measurement", "Straightness" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ea99540692c710001379c36", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 19, "imageuri": "https://productimages.withfloats.com/actual/5ed10614ebc2290001a5f282.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ed10614ebc2290001a5f282.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-04-29T14:54:56.844Z", "updatedon": "2024-07-03T14:00:39Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//hommel-1000-seround-retrofit/19", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [ "Surface Metrology", "roundness", "Harmonics", "Flatness", "Relative Eccentricity", "Harmonics", "Linear Graph", "squareness", "Digital filters", "Gaussian Filter", "2CR filter", "FFT algorithum", "LSC", "MIC", "MCC", "MZC", "Calibration" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b383595c4160537731df4", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Roundness n Cylindricity Machine Retrofit", "description": "TALYROND 252 –RETROFIT SPECIFICATIONS.. FOR SALE\n\nNote*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\n\nA. MESUREMENT CAPACITY\n\n1. Maximum diameter : 350 mm (13.8 in) optionally(also see Para 9) \nextendable to 500 mm (19.7 in)2. Maximum Weight : 20 kg (44.1 lb)3. Maximum Height of assessable Surface : 300mm (11.8 in)4. Worktable Moment Loading : 120 kgmm (10.4 lbin)5. Maximum Eccentricity : 25mm (0.98in) along the load line\n\nB. WORKTABLE AND SPINDLE\n1. Worktable Diameter :190mm (7.5 in)2. Speed of Rotation : 6 rpm nominal, clockwise3. Range of Centering Nominal : ±1mm (±0.04in)4. Range of Leveling Nominal : ±4.1 mrad (±14 arc minutes)5. Height of neutral plane above Worktable : 20mm (0.79in)6. Roundness Limit of Error : Concentric Load 20kg (44.1 lb)(Departure from the least within 0.06 µm 0.0003µm/mmSquares circle at 6 rpm with height above worktable 0-50 u.p.r filter) (1.5 µin 0.3 µin/in)*7. Axial Error : 0.15µm (3.9 µin) maximum axial movement of worktable during one revolution.\n*These departures may be inwards and outwards\n\nC. VERTICAL STRAIGHTNESS UNIT\n1. Measurement Length : 300 mm (11.8in),2. Accuracy of stop Measurement : 0.5mm (0.02in)3. Speed of Traverse (for set-up) : (1) Joystick slow speed0-3mm/s (0-0.12 in/s) for approx 70% of joystick travel. (2) Computer controlled <3 mm/sec variable.4. Straightness limit of Error : In the measuring plane: (Minimum zone straightness at 1µm over 300 mm (40µin 1mm/sec (0.04 in/sec) with over 11.8in) 8.0mm (0.3in) cut off low pass filter5. Positional Control Uncertainty : ±100µm (±0.004in) for one single move.6. Internal Capacity : 150mm (5.9in) For Straightness Limiting conditions, Maximum length of continuous Minimum diameter clearance Internal surface that can be assessed 115mm (4.5in) depth in bores larger thanØ25mm (Ø1in)7. For Roundness assessment Internal bore penetration : 150mm (5.9in), 115mm depth in bore of Ø25mm\n***Internal penetration for other than ‘limiting condition’ depends on component geometry.\n\nD. RADIAL STRAIGHTNESS UNIT1. Traverse Length : 200mm (7.9in) This may be set for up to 50mm (1.97in) of travel past the spindle axis. Standard setting is 25mm past the spindle axis.2. Speed of Traverse : up to 2mm/sec3. Positional control uncertainty : ±50µm (±0.002in) for one single move.This is for both relative and absolute movements.\n\nE. GAUGE1. Standard Stylus Arm Length : 75mm (2.95”) effective length2. Range of Gauge movement with80mm Stylus Arm : 1.2mm (0.079in) Nominal F. ELECTRICAL SUPPLY\n\n\nMain Instrument Overall Weight : 279kg (615lbs)\nOverall Length : 760mm (29.9in)\nOverall Width : 760mm (29.9in)\nOverall Height : 1513mm (59.6in)2. \n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "SeRound", "Pictures", "Software", "respective", "Electronics", "suit machines", "system upgrades", "various customer", "Retrofit Packages", "retrofit solution", "state compatibility", "Cylindricity Instruments", "developed customized solutions", "Roundness n Cylindricity Measuring", "Inhouse developed Retrofit package" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 0, "imageuri": "https://productimages.withfloats.com/actual/5954ef4c3bbec90b3872f2ea.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5954ef4c3bbec90b3872f2ea.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-06-29T12:15:08.9Z", "updatedon": "2024-07-04T09:35:50Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/roundness-n-cylindricity-machine-retrofit/0", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [ "Roundness", "Cylindricity", "Flatness", "Relative Eccentricity", "Straightness", "Parallelism", "Axial Runout", "Radial Runout", "Surface Parallelism", "harmonics", "squareness", "Concentricity", "spherocity", "Perpendicularity" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6686792aa432c82118617675", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Roundness & Cylindricity Tester RMI-D560C", "description": "Roundness Measuring Instrument RMI-D560C\n\nTechnical specifications:\n\nRotary Table\nBearing Type:- Gas bearing\nRotation accuracy:(0.025+6H/10000)μm\nRotating speed:- 4,6,8,10rpm\nAdjust table: diameter:- 180mm\nTable loading capacity:- 25kg\nRotation diameter:- 560mm\nMax measure diameter:- 280mm\n\nColumn (Z-axis )\n\nColumn transverse travel:- 320mm (electric)\nMax detection depth:- 100mm (min inner diameter) : 30mm)\nColumn straightness:- 0.3μm /100mm\n\nHorizontal arm (X-axis)\nHorizontal movement:- 165mm (electric)\nProtrusion amount:- 25mm\n\nDetector\nAcquisition device:- Circle grating\nCircumference of sampling:- 14400 points\nSensor type:- Inductive Sensor\nSensor range :- ±300μm\nSensor resolution:- 0.001μm\nX raster:- RENISHAW grating scale 0.5um\nZ raster:- RENISHAW grating scale 0.5um\n\n*The above machine specifications can be customized and upgraded according to demand\n\nTechnical features\n1) The machine reference table and Z-axis column material are made of natural granite, the structure is not deformed, and the performance is more stable and reliable.\n2) The rotating spindle adopts a frictionless air-floating spindle, the accuracy is kept longer, and the\nrotation speed is stable\n3) The use of X-direction and Z-direction high-precision grating sensors improves the degree of\nautomation and realizes the measurement function that the sensors can automatically contact.\n4) The key components adopt special stress-relief alloy materials and special stress-relief treatment process, and the durability and accuracy are kept longer.\n\nCylindricity Introduction\nCylindricity measuring instrument is benchmark against precision rotary center and linear motion\nguide,the quantitative evaluation of the cylindricity is made by measuring the radius variation of\nactual contour of several cylindricity surface in different angle position to rotary center by\ndisplacement sensor in the guide. It is used to measure the error of contour shape of cylindricity workpiece (Roundness, cylindricity, planeness, straightness),position error (concentricity, coaxiality, run-out and perpendicularity)\n\nMeasurement Capability:\nEvaluation item: Cylindricity module: Radial full jump, concentricity, taper, radius\nRoundness module: Concentricity, radial single jump, wall thickness difference\nStraightness module: Parallelism, verticality\nSingle section flatness module: Axial single jump, verticality and parallelism\nMulti-section flatness module: parallelism, Axial full jump, verticality\nCommutator module: Single contacts jump, Adjacent contacts jump, intermittent difference of contacts.\n\nReference standard for cylindricity evaluation: LSCY、 MZCY、 MICY、 MCCY、 OSCY\n\nSoftware functions\n1) The software supports Chinese, English, and supports XP, win7, win8, win10 systems\n2) The standard report has various evaluation methods, and the parameters in the test report can be\nadded and deleted as needed.\n3) With commutator module, it can evaluate single-chip true circle, adjacent segment difference and\ngroove segment difference, and the measurement result can be deleted automatically or manually.\n4) Software can assist the rotating spindle to adjust the center and level, improve efficiency and save\ntime\n5) Measurement results can choose ISO statistical report or ISO standard report\n6) Can perform spectrum analysis on contour graphics\n7) Flatness measurement depending on the model can support single-section measurement (D420)\nor 2 to 15 multi-section measurements (D560C)\n8) In multi-section measurement, you can call, delete, and add to each section separately, and you\ncan choose 2 sections at will defined as the reference of the workpiece, performing 2 combined operations not only avoids repeated measurements, but also improves the measurement efficiency.\n9) Cylindricity is calculated by multiple axes, and each axis is corrected by software to minimize the error between the axis systems (D560C)\n10) 3D graphics display, and the graphics can be rotated, beautiful and easy to read. And observe the\noverall contour of the workpiece through relative zoom.\n11) The software is programmable, automatic measurement, and the original measurement data is\nautomatically saved.\n\n\nDevice Configuration\n\nMain Machine\n\nBasic Workbench:- Natural granite\nHigh-precision air float spindle:- \nRotation accuracy\n(0.025+6H/10000)μm\nColumn system:- Natural granite\nHorizontal system:- Steel structure\nPrecision alignment and leveling table 1 Alignment: ±3mm Leveling: ±2°\n\nFor Complete catalog kindly request it from Us", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "X raster", "2 sections", "test report", "Sensor type", "Gas bearing", "14400 points", "3mm Leveling", "axis systems", "Sensor range", "280mm Column", "Adjust table", "relative zoom", "multiple axes", "win10 systems", "contour shape", "25mm Detector", "Column system", "position error", "actual contour", "key components", "Horizontal arm", "Rotating speed", "rotation speed", "0.5um Z raster", "Steel structure", "overall contour", "natural granite", "Evaluation item", "Axial full jump", "Complete catalog", "contour graphics", "Inductive Sensor", "rotating spindle", "Radial full jump", "Rotation accuracy", "Horizontal system", "spectrum analysis", "Sensor resolution", "Protrusion amount", "Commutator module", "table 1 Alignment", "Axial single jump", "Software functions", "Technical features", "measurement result", "Reference standard", "Acquisition device", "min inner diameter", "radial single jump", "displacement sensor", "Horizontal movement", "Column straightness", "Straightness module", "Precision alignment", "Cylindricity module", "ISO standard report", "linear motion guide", "Max detection depth", "measurement function", "Flatness measurement", "Max measure diameter", "Single contacts jump", "2 combined operations", "automatic measurement", "repeated measurements", "measurement efficiency", "cylindricity workpiece", "Measurement Capability", "machine specifications", "Z-axis column material", "25kg Rotation diameter", "Adjacent contacts jump", "ISO statistical report", "quantitative evaluation", "cylindricity evaluation", "intermittent difference", "radius Roundness module", "10) 3D graphics display", "precision rotary center", "machine reference table", "single-chip true circle", "Technical specifications", "Column transverse travel", "different angle position", "Cylindricity Introduction", "original measurement data", "groove segment difference", "wall thickness difference", "Rotary Table Bearing Type", "single-section measurement", "various evaluation methods", "adjacent segment difference", "several cylindricity surface", "Circle grating Circumference", "180mm Table loading capacity", "Multi-section flatness module", "Single section flatness module", "High-precision air float spindle", "frictionless air-floating spindle", "Cylindricity measuring instrument", "2 to 15 multi-section measurements", "special stress-relief alloy materials", "special stress-relief treatment process", "Z-direction high-precision grating sensors", "Device Configuration Main Machine Basic Workbench", "Cylindricity Tester RMI-D560C Roundness Measuring Instrument RMI-D560C" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 53, "imageuri": "https://bizimages.withfloats.com/actual/90a95825107047e5a4e16694249cf44a.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/90a95825107047e5a4e16694249cf44a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-04T10:27:54.338Z", "updatedon": "2024-07-04T10:27:54.338Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/roundness-cylindricity-tester-rmi-d560c/53", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Roundness Tester", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "668556c90610e119044be8ef", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Voting Machines", "description": "The Electronic Voting Machine (EVM) is a voting system completely developed In-House jointly by Salbro Engineers and Base Technologies. Both these companies jointly handle projects and operate from the same premises in Mumbai, India. \nOur EVM’s are Government Test Lab certified and are one of the most sort-out piece of equipment available in the market today. Reading through this catalogue will help you know about the features this product has to offer.Our system is accurate, robust, user friendly and “Is performance” driven in its operations.\n\nEVM Features\n\n1) Controller based system of Voting in comparison to Previous Ballot Paper Voting.\n2) Tamper Proof. No influence of radioactive waves, electromagnetic waves etc\n3) Electro – Mechanical buttons are used in the ballot units\n4) Registering of votes is instant. Saves time and cost.\n\nField configurable: Configure the EVM via Evm_App software to set\n1) No of Candidates contesting elections\n2) No of Categories (upto 15 Categories) OR no category\n3) No of votes the voter is permitted to cast.\n4) The system does not allow the voter to vote twice for a candidate.\n5) Compulsory/Not compulsory voting.\n o Should the voter cast all permissible votes or Not?\n o No of winners to be selected from each category\n\nPc/Laptop is connected to EVM control units only to configure them before voting starts and for retrieving of vote data after election ends else the EVM system works independently.\n\nA total of 65,000 voters can cast votes in one EVM.\n65,000 votes for each candidate can be cast.\nBasic model of our EVM accepts up to 16 contestants /candidates in the race. Exceeding 16 candidates we cascade/ attach additional Ballot unit of 16 buttons each.\nOne EVM control unit can handle up to 64 candidates.\nNo loss of voting data even in the case of power failure.\nNo invalid votes can be cast\nVoting data is stored in memory chips and the data is stored for decades.\nMemory chips can only be erased by authenticated users only via the PC/Laptop\n“Evm_App” software.\nTransfer data from Evm Control Units to Evm_App for consolidated reports, excel exports.\nEncoded / Encrypted files can be uploaded unto server in a secure manner.\nReusability.\nConduct voting even in the absence of electrical supply.\nEco Friendly.\n\nPC Software – EVM Data Analysis\nThe PC software is a windows based desktop application and it provides the user with a graphical user interface in\nRequesting stored data from all controls units.\nConfiguring the EVM in setting the\nNo of Candidates contesting elections.\nNo of Categories  (11 Categories in all) OR no category\nNo of votes the voter is permitted to cast.\nCompulsory/Not compulsory voting\nNo of winners to be selected from each category\nSetting the communication Port for hand shaking between software and control unit.\nReceiving data from control units, decoding it and saving data into respective encrypted files.\nIt does not consider data from the same unit even if multiple requests are made.\nIt outputs a consolidated report considering data from all units that were connected to PC.\n\nApplications\no Co-Op Hsg Societies for Managing Committee.\no Co-Op Banks .\no Associations n Trusts (Board n Trustee selections)\no Corporate Companies (Board, Secretary n Chairman selections)\no Panchayat & Municipal elections.\no Schools, Colleges & Universities.\no General n Assembly elections & any other election.\n\nServices\nWe also provide services like conducting and supervising elections until Election Result is declared.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "vote data", "out piece", "same unit", "16 buttons", "EVM system", "PC Software", "voting data", "Basic model", "Co-Op Banks", "65,000 votes", "EVM Features", "memory chips", "Tamper Proof", "ballot units", "invalid votes", "voting system", "secure manner", "power failure", "election ends", "same premises", "voting starts", "16 contestants", "other election", "controls units", "Election Result", "Voting Machines", "Evm_App software", "Salbro Engineers", "permissible votes", "multiple requests", "electrical supply", "radioactive waves", "Base Technologies", "EVM Data Analysis", "EVM control units", "Mechanical buttons", "Trustee selections", "Managing Committee", "communication Port", "Corporate Companies", "Municipal elections", "Chairman selections", "desktop application", "authenticated users", "Co-Op Hsg Societies", "Government Test Lab", "consolidated reports", "One EVM control unit", "electromagnetic waves", "Not compulsory voting", "additional Ballot unit", "graphical user interface", "respective encrypted files", "Previous Ballot Paper Voting", "General n Assembly elections", "The Electronic Voting Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 50, "imageuri": "https://productimages.withfloats.com/actual/5f4653b62a035b0001e29a84.bmp", "tileimageuri": "https://productimages.withfloats.com/actual/5f4653b62a035b0001e29a84.bmp", "images": [ { "imageuri": "https://fpimages.withfloats.com/actual/67d012562b7d79fd124bd98a.jpg", "tileimageuri": "https://fpimages.withfloats.com/actual/67d012562b7d79fd124bd98a.jpg" }, { "imageuri": "https://fpimages.withfloats.com/actual/67d012303b02afe4871d687b.jpg", "tileimageuri": "https://fpimages.withfloats.com/actual/67d012303b02afe4871d687b.jpg" }, { "imageuri": "https://fpimages.withfloats.com/actual/67d012294e51c112a0ebf5c7.jpg", "tileimageuri": "https://fpimages.withfloats.com/actual/67d012294e51c112a0ebf5c7.jpg" } ], "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:48:57.685Z", "updatedon": "2025-03-11T10:37:37.014Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/voting-machines/50", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Election Voting Machine", "tags": [ "Transparent Results", "Electronic Voting", "election", "vote", "multiple voting", "non tamperable", "EVM", "EVM manufacturer", "Electronic Voting Machine", "Election voting System", "Voting Systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685566763a8700a4014261a", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Electronic Voting Machine", "description": "The Electronic Voting Machine (EVM) is a voting system completely developed In-House jointly by Salbro Engineers and Base Technologies. Both these companies jointly handle projects and operate from the same premises in Mumbai, India. \nOur EVM’s are Government Test Lab certified and are one of the most sort-out piece of equipment available in the market today. Reading through this catalogue will help you know about the features this product has to offer.Our system is accurate, robust, user friendly and “Is performance” driven in its operations.\n\nEVM Features\n\n1) Controller based system of Voting in comparison to Previous Ballot Paper Voting.\n2) Tamper Proof. No influence of radioactive waves, electromagnetic waves etc\n3) Electro – Mechanical buttons are used in the ballot units\n4) Registering of votes is instant. Saves time and cost.\n\nField configurable: Configure the EVM via Evm_App software to set\n1) No of Candidates contesting elections\n2) No of Categories (upto 15 Categories) OR no category\n3) No of votes the voter is permitted to cast.\n4) The system does not allow the voter to vote twice for a candidate.\n5) Compulsory/Not compulsory voting.\n o Should the voter cast all permissible votes or Not?\n o No of winners to be selected from each category\n\nPc/Laptop is connected to EVM control units only to configure them before voting starts and for retrieving of vote data after election ends else the EVM system works independently.\n\nA total of 65,000 voters can cast votes in one EVM.\n65,000 votes for each candidate can be cast.\nBasic model of our EVM accepts up to 16 contestants /candidates in the race. Exceeding 16 candidates we cascade/ attach additional Ballot unit of 16 buttons each.\nOne EVM control unit can handle up to 64 candidates.\nNo loss of voting data even in the case of power failure.\nNo invalid votes can be cast\nVoting data is stored in memory chips and the data is stored for decades.\nMemory chips can only be erased by authenticated users only via the PC/Laptop\n“Evm_App” software.\nTransfer data from Evm Control Units to Evm_App for consolidated reports, excel exports.\nEncoded / Encrypted files can be uploaded unto server in a secure manner.\nReusability.\nConduct voting even in the absence of electrical supply.\nEco Friendly.\n\nPC Software – EVM Data Analysis\nThe PC software is a windows based desktop application and it provides the user with a graphical user interface in\nRequesting stored data from all controls units.\nConfiguring the EVM in setting the\nNo of Candidates contesting elections.\nNo of Categories  (11 Categories in all) OR no category\nNo of votes the voter is permitted to cast.\nCompulsory/Not compulsory voting\nNo of winners to be selected from each category\nSetting the communication Port for hand shaking between software and control unit.\nReceiving data from control units, decoding it and saving data into respective encrypted files.\nIt does not consider data from the same unit even if multiple requests are made.\nIt outputs a consolidated report considering data from all units that were connected to PC.\n\nApplications\no Co-Op Hsg Societies for Managing Committee.\no Co-Op Banks .\no Associations n Trusts (Board n Trustee selections)\no Corporate Companies (Board, Secretary n Chairman selections)\no Panchayat & Municipal elections.\no Schools, Colleges & Universities.\no General n Assembly elections & any other election.\n\nServices\nWe also provide services like conducting and supervising elections until Election Result is declared.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "vote data", "out piece", "same unit", "16 buttons", "EVM system", "PC Software", "voting data", "Basic model", "Co-Op Banks", "65,000 votes", "EVM Features", "memory chips", "Tamper Proof", "ballot units", "invalid votes", "voting system", "secure manner", "power failure", "election ends", "same premises", "voting starts", "16 contestants", "other election", "controls units", "Election Result", "Evm_App software", "Salbro Engineers", "permissible votes", "multiple requests", "electrical supply", "radioactive waves", "Base Technologies", "EVM Data Analysis", "EVM control units", "Mechanical buttons", "Trustee selections", "Managing Committee", "communication Port", "Corporate Companies", "Municipal elections", "Chairman selections", "desktop application", "authenticated users", "Co-Op Hsg Societies", "Government Test Lab", "consolidated reports", "One EVM control unit", "electromagnetic waves", "Not compulsory voting", "additional Ballot unit", "graphical user interface", "respective encrypted files", "Previous Ballot Paper Voting", "General n Assembly elections", "The Electronic Voting Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 47, "imageuri": "https://productimages.withfloats.com/actual/5f7b2e21896f78000161cb75.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b2e21896f78000161cb75.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:19.402Z", "updatedon": "2025-03-11T13:53:50.218Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/electronic-voting-machine/47", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Election Voting Machine", "tags": [ "Electronic Voting", "Vote", "Voting", "Voting Center", "Voting Booth", "Election", "Multiple Voting", "Electronic Voting Machine", "EVM", "EVM manufacturer" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }