Home> Products> 12 months free warranty

{ "products": [ { "_id": "66855600c0e30a1804aed583", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roughness & Waviness", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nDescription :\n• SeSurf User Interface to Control, Measure and Position\n• Raw Profile ( Best Fit Line, Curve, Slope Remove)\n• Unfiltered profile Analysis (24 parameters)\n• Roughness profile Analysis (24 parameters)\n• Waviness profile Analysis (24 parameters)\n• Three Filter Modes: Gaussian, 2CR & 2CR PC\n• Bearing Ratio Curve Parameters\n• Crowning (Camber Measurements)\n• Multi Data Plot\n• Specials programs for Analysis can also be developed\n\nSeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use.\nThe Software is User friendly and Powerful.\nSeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus\ndecreasing Time and improving Productivity\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis.\nTraditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics.\nSeSurf incorporates the best industry Standards for data analysis.\nData acquired from the instrument is represented graphically in Raw, Unfiltered, Roughness and Waviness modes.\nRaw data acquired can be analyzed for Slope Removal, Best Fit Line and Best Fit Arc which ever suits the form of the job.\nThere is also a provision for the user to omit areas, unwanted for further analysis.\nUnfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Guassian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\nSeSurf provides 14 parameters for Unfiltered Profiles and 24 for Roughness and Waviness parameters. It also enables the user to perform Statistical analysis on measured results.\nSeSurf’s Bearing Ratio curve enables the user to asses contact/area at a given depth from profile height in percentage to the assessment length.\nParameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nSeSurf Machine Retrofit comes with 12 months free warranty.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2.5 mm", "0.8 mm", "2CR PC", "0.25 mm", "0.08 mm", "Raw data", "later date", "Raw Profile", "Best Fit Arc", "14 parameters", "Slope Removal", "data analysis", "Best Fit Line", "Waviness modes", "profile height", "surface texture", "Multi Data Plot", "other conditions", "Machine Pictures", "assessment length", "3 digital filters", "Specials programs", "surface roughness", "Retrofit Packages", "incomplete picture", "Three Filter Modes", "Waviness parameters", "Camber Measurements", "Unfiltered profiles", "laboratory standard", "cutoff wave lengths", "accurate acquisition", "Statistical analysis", "appropriate analysis", "PC Retrofit Roughness", "SeSurf User Interface", "respective Manufactures", "SeSurf Machine Retrofit", "12 months free warranty", "best industry Standards", "Waviness profile Analysis", "SeSurf computer Interface", "Roughness profile Analysis", "Unfiltered profile Analysis", "Bearing Ratio Curve Parameters", "Traditional measurement methods", "Effective surface characterization", "complex, interrelated characteristics" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/5ea9de9350b2c500013da0ef.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ea9de9350b2c500013da0ef.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.936Z", "updatedon": "2024-07-03T13:51:05Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pc-retrofit-roughness-waviness/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SeSurf Roughness Retrofit ", "category": "Surface Roughness Retrofit", "tags": [ "Roughness", "Waviness", "Analysis", "Roughness Average", "Retrofit", "Rz", "Ra" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "5b6b383595c4160537731f72", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Roughness n Waviness Analysis System - SeSurf ", "description": "•\tSeSurf User Interface to Control, Measure and Position \n•\tRaw Profile ( Best Fit Line, Curve, Slope Remove)\n•\tUnfiltered profile Analysis (24 parameters)\n•\tRoughness profile Analysis (24 parameters)\n•\tWaviness profile Analysis (24 parameters)\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tBearing Ratio Curve Parameters\n•\tCrowning (Camber Measurements)\n•\tMulti Data Plot\n•\tSpecials programs for Analysis can also be developed\n\nSeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. \nThe Software is User friendly and Powerful.\nSeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus\ndecreasing Time and improving Productivity\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis.\nTraditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. \nSeSurf incorporates the best industry Standards for data analysis.\nData acquired from the instrument is represented graphically in Raw, Unfiltered, Roughness and Waviness modes.\nRaw data acquired can be analyzed for Slope Removal, Best Fit Line and Best Fit Arc which ever suits the form of the job. \nThere is also a provision for the user to omit areas, unwanted for further analysis.\nUnfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Guassian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\nSeSurf provides 14 parameters for Unfiltered Profiles and 24 for Roughness and Waviness parameters. It also enables the user to perform Statistical analysis on measured results.\nSeSurf’s Bearing Ratio curve enables the user to asses contact/area at a given depth from profile height in percentage to the assessment length. \nParameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nSeSurf Machine Retrofit comes with 12 months free warranty.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Best Fit Arc", "Best Fit Line", "profile height", "profile Analysis", "Machine Retrofit", "industry Standards", "incomplete picture", "Bearing Ratio curve", "laboratory standard", "Unfiltered Profiles", "measurement methods", "Statistical analysis", "accurate acquisition", "surface characterization", "Roughness n Waviness Analysis System" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 3, "imageuri": "https://productimages.withfloats.com/actual/63e0f9f344249700011beb02.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63e0f9f344249700011beb02.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-10-20T10:23:45.778Z", "updatedon": "2024-07-04T09:32:27Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/roughness-n-waviness-analysis-system-sesurf-/3", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [ "Waviness Measurement", "Roughness Parameteres", "Roughness", "Roughness Measurement", "bearing ratio curve", "Roller Camber Measurement", "Roller Camber Analysis program", "Machine control", "data accusition", "Ra", "Rz", "Best Fit Curve", "Best Fit Line", "Slope Removal", "Gaussian Filter", "2CR filter", "Digital filters" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "66855670c0e30a1804aed58b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roundness n Cylindricity Measuring Machines", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nRetrofit your existing Roundness and Cylindricity Instruments with SeRound an Inhouse developed Retrofit package comprising of Electronics and Software to suit machines for various manufactures. \n\n•\tSeRound the Software Retrofit for Talyrond252 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to analyze / detect the following \n•\tParameters: Roundness,Concentricity,Relative Ecentricity, Flatness. Squareness, Coaxiality, Cylindricity, Axial Runout, Radial Runout, Face Parallelism,Straightness,Parallelism\n\nData acquisition, profile filtering, evaluation of the roundness and other parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) Arm and Column movement (Incremental / Absolute), Gauge Position and orientation has been realized by SeRound. \n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. \n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nTalyrond 252 with SeRound Analysis software Retrofit comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "Axial Runout", "Radial Runout", "Measure window", "default cycles", "Gauge Position", "same parameters", "table centering", "Column movement", "amplifier range", "measuring speed", "Data acquisition", "Face Parallelism", "other parameters", "graphical output", "Salbro Engineers", "Machine Pictures", "profile filtering", "Retrofit Packages", "existing Roundness", "instrument control", "Relative Ecentricity", "various manufactures", "PC Retrofit Roundness", "one precise instrument", "respective Manufactures", "Cylindricity Instruments", "many similar work pieces", "12 months warranty period", "Electronic Interface unit", "interactive user interface", "Cylindricity Measuring Machines", "SeRound Analysis software Retrofit" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:28.094Z", "updatedon": "2024-07-03T13:53:21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pc-retrofit-roundness-n-cylindricity-measuring-machines/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [ "Roundness", "Flatness", "Cylindricity", "Radial Runout", "Axial Runout", "Straightness", "Concentricity", "Talyrond 252", "Retrofit", "SeRound" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685560064f7f623a8ef3983", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SeRound PC Retrofit Roundness Measuring Machine", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "8 mm", "5 rpm", "20 Kg", "0,05 μ", "0,04 μ", "250 mm", "600 μm", "500 mm", "± 0,6 mm", "Pls Note", "high level", "Other speeds", "minimum zone", "Polar filter", "unwanted data", "table surface", "Measure window", "Leveling range", "default cycles", "Rotation speed", "same parameters", "numatic bearing", "minimum squares", "amplifier range", "Centering range", "table centering", "Data acquisition", "graphical output", "Salbro Engineers", "rotating spindle", "Retrofit package", "Machine pictures", "profile filtering", "measurement chain", "Stylus resolution", "Software Retrofit", "Coaxiality Run-out", "capital investment", "instrument control", "measurement accuracy", "Proprietary products", "roundness parameters", "minimum superior plan", "maximum inferior plan", "Linear Filter cut-off", "Max work piece weight", "one precise instrument", "Spindle rotation error", "Stylus measuring range", "performance reliability", "optimal measuring speed", "Max work piece diameter", "Respective Manufacturers", "Air-bearing rotary table", "many similar work pieces", "SeRound Analysis software", "12 months warranty period", "Electronic Interface unit", "The Hommel 1000 instrument", "interactive user interface", "transmission characteristics", "maximum subscribed circumference", "minimum circumscribed circumference", "SeRound PC Retrofit Roundness Measuring Machine PC Retrofit Roundness Measuring Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 57, "imageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.24Z", "updatedon": "2024-07-03T13:45:36.24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/seround-pc-retrofit-roundness-measuring-machine/57", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685548afcd2841c9c9ec3dd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 60, "imageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:22.21Z", "updatedon": "2024-07-03T13:39:22.21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/hommel-1000-seround-retrofit/60", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "5ea99540692c710001379c36", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 19, "imageuri": "https://productimages.withfloats.com/actual/5ed10614ebc2290001a5f282.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ed10614ebc2290001a5f282.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-04-29T14:54:56.844Z", "updatedon": "2024-07-03T14:00:39Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/hommel-1000-seround-retrofit/19", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [ "Surface Metrology", "roundness", "Harmonics", "Flatness", "Relative Eccentricity", "Harmonics", "Linear Graph", "squareness", "Digital filters", "Gaussian Filter", "2CR filter", "FFT algorithum", "LSC", "MIC", "MCC", "MZC", "Calibration" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685560f9bd8290644d801af", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Talysurf5_SeSurf Retrofit Package ", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nPre Owned Talysurf 5 – Retrofitted with SeSurf Ready for Immediate Dispatch\n•\tFive Traverse Speeds 0.05mm to 2.5mm per sec\n•\t120mm mechanical Datum Traverse for Skid & No Skid\n•\tMotorised Column Stand\n•\tStylus Range: 1000 um\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tFive Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm\n•\tAnalysis of Profile, Unfiltered, Roughness & Waviness\n•\tResolution: 0,01 / 0.001 & 0.0001μm \n•\tSection Remove to delete un wanted data \n•\tHard Coded User Logo, Name, Location etc\n•\tFive fields for entering Job details\n•\tSpecials: Auto Save, Excel Export with Statistical. Parameters & More\n \n \nTalysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. \n\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\n\nSeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.\n\nSeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nTalysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2.5 mm", "0.8 mm", "2CR PC", "0.25 mm", "0.08 mm", "Auto Save", "high level", "Job details", "Five fields", "26 Roughness", "Excel Export", "Stylus Range", "The Software", "Base surface", "data analysis", "easy alignment", "Owned Talysurf", "profile height", "surface texture", "other conditions", "Machine Pictures", "surface roughness", "assessment length", "3 digital filters", "Retrofit Packages", "The Manual Column", "incomplete picture", "Immediate Dispatch", "Three Filter Modes", "Pick Up Stylus tip", "Waviness parameters", "laboratory standard", "Unfiltered profiles", "Bearing Ratio curve", "cutoff wave lengths", "appropriate analysis", "accurate acquisition", "measurement accuracy", "Five Traverse Speeds", "Hard Coded User Logo", "Five Filter Cut Offs", "Motorised Column Stand", "performance reliability", "respective Manufactures", "best industry Standards", "The Talysurf5 instrument", "12 month warranty period", "SeSurf computer Interface", "minimum capital investment", "The Granite Base Tee slots", "Traditional measurement methods", "120mm mechanical Datum Traverse", "Talysurf5_SeSurf Retrofit Package", "Effective surface characterization", "complex, interrelated characteristics", "22 different Unfiltered Profile parameters" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 45, "imageuri": "https://productimages.withfloats.com/actual/5fbccf96c22f4100014b8c47.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5fbccf96c22f4100014b8c47.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:51.329Z", "updatedon": "2024-07-03T13:45:51.329Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talysurf5-sesurf-retrofit-package-/45", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685520392cd4214983119bd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT120 Profilometer-roughness tester", "description": "RT120 was conceived from the need to characterize roughness and micro-profiles on pieces, even complex ones, using one device, thanks to the RT120 “all-in-one” logic and Profile Studio analysis software. Profile Studio software was developed to be extremely user friendly and easy to use by the operator; all functions required for the characterization of the profile and roughness are available in the right toolbar and divided into categories, each one featuring a different colour. New dimensions and roughness analyses can be input on the same profile and displayed on the same screen, in order to allow the operator to carry out a complete analysis of the piece, with one single measurement. Thanks to the self-comparing function, it is possible to reconstruct all dimensions and dimensional tolerances of a reference profile on a new profile, thus saving a considerable amount of time for the check in series. The roughness parameters are elaborated according to the most recent standards like ISO 4287, ISO 13565-1 and -2, ISO 12085, VDA 2007 for a total of 70 parameters calculated.\n\nParameters calculated:\t \nISO 4287:09\tRp, Rt, Rv, Rc, Rz, Rzjis, Ra, Ra75, RSm, RΔq, Rsk, Rku, Rδc, RPc, RmrRel Wp, Wt, Wv, Wc, Wz, Wa, Wq, WSm, WΔq, Wsk, Wku, Wδc, WPc, WmrRel Pp, Pt, Pv, Pc, Pz, Pa, Pq, PΔSm, Pq, Psk, Pku, Pδc, PPc, PmeRel\nISO 13565:96 \tRk, Rpk, Rvk, Mr1, Mr2, A1, A2\nDIN 4768:90 \tRy5, Rmax, R3z, R3zMax, PtDIN\nISO12085:98 \tPt, R, AR, Rx, Wte, W, AW, Wx, Rke, Rpke, Rvke\nVDA 2007\tWD, WDc, WDt, WDSm\nMeasurement range in X: \t120 mm (4.72 in)\nMeasurement range in Z:\t3 mm(0.12 in) o 5 mm (0.39 in)\nResolution in X: \t0.1 μm (0.02 μin)\nResolution in Z:\t0.1 nm (0.004 μin)\nMeasurement speed:\t0.25 – 0.5 – 1 – 2 mm/s (0.01 – 0.02 – 0.04 – 0.08 in/s)\nTip sizes:\tDiamond cone 60° angle 2 µm (78 µin) closing radius\nTraverse length of column:\tColumn with a positioning of 320 mm (12.6 in)\nCNC cycles:\tCNC automatic measurement and Positioning cycles with self-comparison\nConnection:\tUSB interface towards Windows© PC\nSoftware:\tProfile Studio\nLanguages:\tItalian, French, English, German, Spanish, Portuguese and Slovenian\nSizes:\tLxDxH1100 x 570 x 720 mm (43.3 x 22.4 x 28.3 in)\nOverall weight:\t50 kg(92 lbs)\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "02 μ", "5 mm", "0.1 μ", "50 kg", "720 mm", "320 mm", "78 µin", "0.1 nm", "120 mm", "ISO 4287", "0.004 μin", "Tip sizes", "WmrRel Pp", "RmrRel Wp", "one device", "CNC cycles", "VDA 2007 WD", "same screen", "new profile", "PC Software", "same profile", "70 parameters", "USB interface", "right toolbar", "New dimensions", "Overall weight", "closing radius", "Slovenian Sizes", "Traverse length", "recent standards", "different colour", "Measurement speed", "Measurement range", "reference profile", "complete analysis", "Positioning cycles", "roughness analyses", "considerable amount", "roughness parameters", "dimensional tolerances", "one single measurement", "Diamond cone 60° angle", "self-comparing function", "Profile Studio software", "Profile Studio Languages", "CNC automatic measurement", "self-comparison Connection", "Profile Studio analysis software", "RT120 Profilometer-roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 62, "imageuri": "https://productimages.withfloats.com/actual/5f7b1cb2ff319600013478d1.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1cb2ff319600013478d1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:28:35.755Z", "updatedon": "2024-07-03T13:28:35.755Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt120-profilometer-roughness-tester/62", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "Surface Roughness", "contour", "ISO 13565-1", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6210cd7d42cde700018b45d3", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PGS100 Profilometer", "description": "The PGS100 profilometer allows to acquire 2D profiles in an extremely simple and intuitive way, thanks also to its measuring range of 130 mm in length (X) and 50 mm in height (Z).\n\nThe use of the tool takes place through the commands given by the software or from the PC keyboard in a very intuitive way.\n\nThe Profile Studio analysis program is equipped with all the CAD functions necessary for the dimensioning of your pieces, it also allows you to create programs to automate the characterization of the elements, for example during series measurements.\n\nThe standard configuration that includes the worktable with \"T\" slot and the 32 mm chisel measuring probe, can be enriched and completed with various accessories, including the positioner with 3 or 4 degrees of freedom on bearings and the precision vice that allows you to firmly clamp the pieces during measurements.\n\nThe calibration, thanks to the dedicated calibration sample, takes place guided by the software.\n\nCHARACTERISTICS:\nUnit of measure: \tMillimetres and inches\nExploration stroke (X): \t130 mm (5,12 in)\nMeasuring range (Z): \t50 mm (1,97 in)\nColumn travel (Y) \t320 mm (12,6 in) manual\nSampling interval (X): \t0,5 μm (0,02 μin)\nZ axis resolution: \t0,2 μm (0,008 μin)\nPositioning speeds: \t0-10 mm/s (0-7 in/s)\nMeasurement speed: 0.2 mm/s to 2 mm/s (from 0.008 in/s to 0.08 in/s)\nTip radius: \t20 μm (0,8 μin)\nCNC cycles: Automatic CNC measuring and positioning cycles with auto-comparion\nConnection: USB interface to Windows© PC\nLanguages: English, French, German, Italian, Spanish, Portuguese and Slovenian\nDimensions (L x D x H): \t1030 x 410 x 660 mm (41 x 16 x 26 in)\nTotal weight: 34 kg (75 lbs)\nSupply voltages: 110-240 V ; 50-60 Hz\nWorking temperatures: 15 - 25°C (59 - 77°F)\nSoftware: \tProfile Studio Basic\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and machine accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "use", "tool", "place", "50 mm", "length", "pieces", "height", "simple", "130 mm", "example", "T\" slot", "freedom", "elements", "programs", "software", "commands", "bearings", "4 degrees", "worktable", "positioner", "PC keyboard", "2D profiles", "dimensioning", "CAD functions", "intuitive way", "precision vice", "measuring range", "characterization", "series measurements", "various accessories", "standard configuration", "The PGS100 profilometer", "32 mm chisel measuring probe", "dedicated calibration sample", "The Profile Studio analysis program" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 33, "imageuri": "https://productimages.withfloats.com/actual/63c7b8fb7a4ce700014e0b1a.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7b8fb7a4ce700014e0b1a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:59:09.691Z", "updatedon": "2024-07-05T11:01:17Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pgs100-profilometer/33", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Contour Profilometer", "tags": [ "Profilometers", "Contour", "Contour Measurement", "Form Measurement", "CAD functions", "Automatic CNC positioning", "Automatic CNC measuring" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }