Home> Products> characterization

{ "products": [ { "_id": "668556664bffde21ec92eb2b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R500 Roundness Tester", "description": "R500 roundness tester is located at the top of machines for the characterization of revolution surfaces in the world panorama for what concerns the maximum dimensions of the object that can be measured; born from the thirty year experience that SM has in this field, it has been designed to measure bulky and heavy pieces, maintaining high accuracies.\n\nR500 features 3 metrological axes, pneumostatically supported, for measurement and positioning, which ensure fluent movements without frictions and remarkable sturdiness of the entire system.\n\nThe flagship application of R500 is the characterization of bulky particulars in the energy sector (turbines, compressors, bearings) where all the essential characteristics for the final quality of the product must be determined.\n\nThe motorized plate allows the automatic centering of the piece, executed with a procedure inside the Circom software.\n\nCHARACTERISTICS:\nPneumostatic plate\nPlatform diameter: 650 mm\nExpansion diameter: 1200 mm\nMaximum measureable diameter: 1300 mm\nAxial bearing capacity: 1500 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: 0,25 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm with automatic cycle\nLevelling range: ± 1°\nResolution: 0,009° (40k pts/rev)\n\nPneumostatic R axis\nUseful traverse length: 650 mm\nLinearity: ≤ 0,5 μm su 500 mm\nSpeed: 0,2 – 10 mm/s\nResolution: 1 μm\nC axis (Column with recirculating ball guides)\nUseful traverse length: 900 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution 0,1 μm\nPick-up Measurement positioning: In three positions (internal, external, lateral)\nMeasurement strength : Internal/external 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional with 8 mm ruby sphere", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "1 μ", "6 rpm", "3 rpm", "15 mm", "10 mm", "±5 mm", "150 mN", "0,5 μm", "600 mm", "900 mm", "C axis", "1500 kg", "1300 mm", "1200 mm", "±1000 μm", "plate level", "500 mm Speed", "heavy pieces", "final quality", "energy sector", "entire system", "plate surface", "Radial run-out", "world panorama", "Maximum height", "Centring range", "three positions", "Linearity error", "manual rotation", "Circom software", "high accuracies", "motorized plate", "650 mm Linearity", "fluent movements", "8 mm ruby sphere", "bulky particulars", "Measurement range", "maximum dimensions", "Expansion diameter", "3 metrological axes", "revolution surfaces", "automatic centering", "Pneumostatic R axis", "Internal/external 20", "Measurement strength", "flagship application", "remarkable sturdiness", "R500 Roundness Tester", "Useful traverse length", "Axial bearing capacity", "thirty year experience", "essential characteristics", "recirculating ball guides", "Maximum measureable diameter", "Pick-up Measurement positioning", "automatic cycle Levelling range", "Pneumostatic plate Platform diameter" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 47, "imageuri": "https://productimages.withfloats.com/actual/63e10f3245c48e0001eb3324.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63e10f3245c48e0001eb3324.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:18.891Z", "updatedon": "2024-07-03T13:47:18.891Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r500-roundness-tester/47", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "", "", "roundness tester", "", "large Size Bearings measurement", "", "Form Measurement", "", "Roundness Measuring", "", "Cylindricity", "", "turbines measurement", "", "compressors measurement", "" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685560f9bd8290644d801af", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Talysurf5_SeSurf Retrofit Package ", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nPre Owned Talysurf 5 – Retrofitted with SeSurf Ready for Immediate Dispatch\n•\tFive Traverse Speeds 0.05mm to 2.5mm per sec\n•\t120mm mechanical Datum Traverse for Skid & No Skid\n•\tMotorised Column Stand\n•\tStylus Range: 1000 um\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tFive Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm\n•\tAnalysis of Profile, Unfiltered, Roughness & Waviness\n•\tResolution: 0,01 / 0.001 & 0.0001μm \n•\tSection Remove to delete un wanted data \n•\tHard Coded User Logo, Name, Location etc\n•\tFive fields for entering Job details\n•\tSpecials: Auto Save, Excel Export with Statistical. Parameters & More\n \n \nTalysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. \n\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\n\nSeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.\n\nSeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nTalysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2.5 mm", "0.8 mm", "2CR PC", "0.25 mm", "0.08 mm", "Auto Save", "high level", "Job details", "Five fields", "26 Roughness", "Excel Export", "Stylus Range", "The Software", "Base surface", "data analysis", "easy alignment", "Owned Talysurf", "profile height", "surface texture", "other conditions", "Machine Pictures", "surface roughness", "assessment length", "3 digital filters", "Retrofit Packages", "The Manual Column", "incomplete picture", "Immediate Dispatch", "Three Filter Modes", "Pick Up Stylus tip", "Waviness parameters", "laboratory standard", "Unfiltered profiles", "Bearing Ratio curve", "cutoff wave lengths", "appropriate analysis", "accurate acquisition", "measurement accuracy", "Five Traverse Speeds", "Hard Coded User Logo", "Five Filter Cut Offs", "Motorised Column Stand", "performance reliability", "respective Manufactures", "best industry Standards", "The Talysurf5 instrument", "12 month warranty period", "SeSurf computer Interface", "minimum capital investment", "The Granite Base Tee slots", "Traditional measurement methods", "120mm mechanical Datum Traverse", "Talysurf5_SeSurf Retrofit Package", "Effective surface characterization", "complex, interrelated characteristics", "22 different Unfiltered Profile parameters" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 45, "imageuri": "https://productimages.withfloats.com/actual/5fbccf96c22f4100014b8c47.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5fbccf96c22f4100014b8c47.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:51.329Z", "updatedon": "2024-07-03T13:45:51.329Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talysurf5-sesurf-retrofit-package-/45", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "66855600c0e30a1804aed583", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roughness & Waviness", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nDescription :\n• SeSurf User Interface to Control, Measure and Position\n• Raw Profile ( Best Fit Line, Curve, Slope Remove)\n• Unfiltered profile Analysis (24 parameters)\n• Roughness profile Analysis (24 parameters)\n• Waviness profile Analysis (24 parameters)\n• Three Filter Modes: Gaussian, 2CR & 2CR PC\n• Bearing Ratio Curve Parameters\n• Crowning (Camber Measurements)\n• Multi Data Plot\n• Specials programs for Analysis can also be developed\n\nSeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use.\nThe Software is User friendly and Powerful.\nSeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus\ndecreasing Time and improving Productivity\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis.\nTraditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics.\nSeSurf incorporates the best industry Standards for data analysis.\nData acquired from the instrument is represented graphically in Raw, Unfiltered, Roughness and Waviness modes.\nRaw data acquired can be analyzed for Slope Removal, Best Fit Line and Best Fit Arc which ever suits the form of the job.\nThere is also a provision for the user to omit areas, unwanted for further analysis.\nUnfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Guassian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\nSeSurf provides 14 parameters for Unfiltered Profiles and 24 for Roughness and Waviness parameters. It also enables the user to perform Statistical analysis on measured results.\nSeSurf’s Bearing Ratio curve enables the user to asses contact/area at a given depth from profile height in percentage to the assessment length.\nParameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nSeSurf Machine Retrofit comes with 12 months free warranty.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2.5 mm", "0.8 mm", "2CR PC", "0.25 mm", "0.08 mm", "Raw data", "later date", "Raw Profile", "Best Fit Arc", "14 parameters", "Slope Removal", "data analysis", "Best Fit Line", "Waviness modes", "profile height", "surface texture", "Multi Data Plot", "other conditions", "Machine Pictures", "assessment length", "3 digital filters", "Specials programs", "surface roughness", "Retrofit Packages", "incomplete picture", "Three Filter Modes", "Waviness parameters", "Camber Measurements", "Unfiltered profiles", "laboratory standard", "cutoff wave lengths", "accurate acquisition", "Statistical analysis", "appropriate analysis", "PC Retrofit Roughness", "SeSurf User Interface", "respective Manufactures", "SeSurf Machine Retrofit", "12 months free warranty", "best industry Standards", "Waviness profile Analysis", "SeSurf computer Interface", "Roughness profile Analysis", "Unfiltered profile Analysis", "Bearing Ratio Curve Parameters", "Traditional measurement methods", "Effective surface characterization", "complex, interrelated characteristics" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/5ea9de9350b2c500013da0ef.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ea9de9350b2c500013da0ef.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.936Z", "updatedon": "2024-07-03T13:51:05Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pc-retrofit-roughness-waviness/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SeSurf Roughness Retrofit ", "category": "Surface Roughness Retrofit", "tags": [ "Roughness", "Waviness", "Analysis", "Roughness Average", "Retrofit", "Rz", "Ra" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685520392cd4214983119bd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT120 Profilometer-roughness tester", "description": "RT120 was conceived from the need to characterize roughness and micro-profiles on pieces, even complex ones, using one device, thanks to the RT120 “all-in-one” logic and Profile Studio analysis software. Profile Studio software was developed to be extremely user friendly and easy to use by the operator; all functions required for the characterization of the profile and roughness are available in the right toolbar and divided into categories, each one featuring a different colour. New dimensions and roughness analyses can be input on the same profile and displayed on the same screen, in order to allow the operator to carry out a complete analysis of the piece, with one single measurement. Thanks to the self-comparing function, it is possible to reconstruct all dimensions and dimensional tolerances of a reference profile on a new profile, thus saving a considerable amount of time for the check in series. The roughness parameters are elaborated according to the most recent standards like ISO 4287, ISO 13565-1 and -2, ISO 12085, VDA 2007 for a total of 70 parameters calculated.\n\nParameters calculated:\t \nISO 4287:09\tRp, Rt, Rv, Rc, Rz, Rzjis, Ra, Ra75, RSm, RΔq, Rsk, Rku, Rδc, RPc, RmrRel Wp, Wt, Wv, Wc, Wz, Wa, Wq, WSm, WΔq, Wsk, Wku, Wδc, WPc, WmrRel Pp, Pt, Pv, Pc, Pz, Pa, Pq, PΔSm, Pq, Psk, Pku, Pδc, PPc, PmeRel\nISO 13565:96 \tRk, Rpk, Rvk, Mr1, Mr2, A1, A2\nDIN 4768:90 \tRy5, Rmax, R3z, R3zMax, PtDIN\nISO12085:98 \tPt, R, AR, Rx, Wte, W, AW, Wx, Rke, Rpke, Rvke\nVDA 2007\tWD, WDc, WDt, WDSm\nMeasurement range in X: \t120 mm (4.72 in)\nMeasurement range in Z:\t3 mm(0.12 in) o 5 mm (0.39 in)\nResolution in X: \t0.1 μm (0.02 μin)\nResolution in Z:\t0.1 nm (0.004 μin)\nMeasurement speed:\t0.25 – 0.5 – 1 – 2 mm/s (0.01 – 0.02 – 0.04 – 0.08 in/s)\nTip sizes:\tDiamond cone 60° angle 2 µm (78 µin) closing radius\nTraverse length of column:\tColumn with a positioning of 320 mm (12.6 in)\nCNC cycles:\tCNC automatic measurement and Positioning cycles with self-comparison\nConnection:\tUSB interface towards Windows© PC\nSoftware:\tProfile Studio\nLanguages:\tItalian, French, English, German, Spanish, Portuguese and Slovenian\nSizes:\tLxDxH1100 x 570 x 720 mm (43.3 x 22.4 x 28.3 in)\nOverall weight:\t50 kg(92 lbs)\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "02 μ", "5 mm", "0.1 μ", "50 kg", "720 mm", "320 mm", "78 µin", "0.1 nm", "120 mm", "ISO 4287", "0.004 μin", "Tip sizes", "WmrRel Pp", "RmrRel Wp", "one device", "CNC cycles", "VDA 2007 WD", "same screen", "new profile", "PC Software", "same profile", "70 parameters", "USB interface", "right toolbar", "New dimensions", "Overall weight", "closing radius", "Slovenian Sizes", "Traverse length", "recent standards", "different colour", "Measurement speed", "Measurement range", "reference profile", "complete analysis", "Positioning cycles", "roughness analyses", "considerable amount", "roughness parameters", "dimensional tolerances", "one single measurement", "Diamond cone 60° angle", "self-comparing function", "Profile Studio software", "Profile Studio Languages", "CNC automatic measurement", "self-comparison Connection", "Profile Studio analysis software", "RT120 Profilometer-roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 39, "imageuri": "https://productimages.withfloats.com/actual/5f7b1cb2ff319600013478d1.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1cb2ff319600013478d1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:28:35.755Z", "updatedon": "2024-07-03T13:28:35.755Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt120-profilometer-roughness-tester/39", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "Surface Roughness", "contour", "ISO 13565-1", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685515b7697320a5c5e00a6", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Profilometer PGS 200 Contour Measuring Instrument", "description": "The new profilometer PGS 200 combines the need to have a highly versatile tool, which ensures ease of installation in production environments, however, that in measuring rooms to ensure the accuracy of the measures to be always certain of the results obtained. With the concept \"all at once\" the PGS 200 with a few clicks is now operating through the Profile Studio analysis software in a short time the operator is able to measure even the most complex\n\nKey Features\n• Structure \"all in one\", no external electronics.\n• Treated alloy base that combines high rigidity and light weight.\n• Measuring range Y- 50 mm, X- 220mm\n• Measurement speed: 0.5, 1, 2 mm / sec\n• Angle measurement: up 70 °, 85 ° down.\n• CNC column position 320 mm. Ability to run automatic cycles, not in manual column\n• Autocomparazione of measurements.\n• © Windows software with aid to the operator through the Wizard to the most complex operations\n• Advanced CAD functions (tolerances, errors of form)\n\nThe new PGS 200 profilometer is a project where the goal was to create a system for the characterization of surfaces by extreme flexibility. Following this philosophy has created a machine that, thanks to the considerable size and weight reduction (inside the machine weighs just over 40 kg) allows easy installation in any environment, which may be metrology laboratory or production line.\n\nThe acquisition system is based on a 200 PGS traverse movement, through which the polar probe is kept in contact with the work piece. The system is combined with two Nano sensors guarantees result with in a working area of 50mm x 220 mm while maintaining a high level of accuracy.\n\nThe base is made of light alloy; this combination provides a significant reduction in weight while maintaining a high resistance to scratching and wear. The column positioning allows you to move the Traverse up to a height of 380mm above base.\n\nUsing the positioner mounted on the base of the instrument, the loading and unloading of the pieces are greatly simplified since the positioner can be moved along a special guide allowing you to load the piece off from work and then bringing it close with precision. With the software Profile Studio study, all the functions necessary for the characterization of the profile are easily accessible thanks to the tool bar right where every family to a different color (lines, arcs, points), this makes each function easily recognizable and accessible with a single clicks.\n\nIn the tool bar on the left of the group is represented in the measured profiles so you can easily switch from an atrium or, if desired, assist them in a multi-screen. Same bar, also consists the major functions for instrument control including the position of the axes and buttons for starting measurement and calibration position. With this interface the operator with a glance full control of the application.\n\nFor more complex procedures used is the philosophy of the Wizard or the operator is guided step by step through each elementary operations,\ngreatly simplifying the entire procedure. This type of assistance is used for example for calibration and the search for points of maximum\nand minimum during the placement of a piece.\n\nThe CAD program is the basis of highly advanced, all entities are dynamic and therefore editable after insertion. With the functions \"Best Fit\" the operator with a single click you can place a arc or a line on the profile because the program will automatically recognize the area to the\nminimum error in which include this element. Through the program you can control every movement of the tool by setting the measurement parameters for each of the measures for automated* repeated measurements, you can also set facilitating the movement of the limits in this way, the positioning during difficult measures such as inside holes and groves.\n\nThrough the \"Autocomparazione\" the program automatically rebuilds, measured on a new profile, construction and dimensional tolerances of these making a reference profile, so high speed control pieces of the same lot.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2 mm", "40 kg", "tool bar", "same lot", "Best Fit", "Same bar", "X- 220mm", "work piece", "short time", "high level", "CAD program", "polar probe", "light alloy", "new profile", "working area", "light weight", "single click", "Key Features", "minimum error", "special guide", "manual column", "high rigidity", "50mm x 220 mm", "versatile tool", "production line", "major functions", "different color", "high resistance", "Measuring range", "measuring rooms", "weight reduction", "entire procedure", "automatic cycles", "easy installation", "Angle measurement", "considerable size", "reference profile", "Measurement speed", "difficult measures", "acquisition system", "column positioning", "complex procedures", "complex operations", "© Windows software", "instrument control", "Treated alloy base", "extreme flexibility", "CNC column position", "glance full control", "calibration position", "metrology laboratory", "external electronics", "new profilometer PGS", "repeated measurements", "elementary operations", "significant reduction", "dimensional tolerances", "measurement parameters", "Advanced CAD functions", "production environments", "new PGS 200 profilometer", "200 PGS traverse movement", "high speed control pieces", "two Nano sensors guarantees", "software Profile Studio study", "Profile Studio analysis software", "Profilometer PGS 200 Contour Measuring Instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 38, "imageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:25:47.401Z", "updatedon": "2024-07-03T13:30:00Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//profilometer-pgs-200-contour-measuring-instrument/38", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "contour", "Contour Measurement", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210cd7d42cde700018b45d3", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PGS100 Profilometer", "description": "The PGS100 profilometer allows to acquire 2D profiles in an extremely simple and intuitive way, thanks also to its measuring range of 130 mm in length (X) and 50 mm in height (Z).\n\nThe use of the tool takes place through the commands given by the software or from the PC keyboard in a very intuitive way.\n\nThe Profile Studio analysis program is equipped with all the CAD functions necessary for the dimensioning of your pieces, it also allows you to create programs to automate the characterization of the elements, for example during series measurements.\n\nThe standard configuration that includes the worktable with \"T\" slot and the 32 mm chisel measuring probe, can be enriched and completed with various accessories, including the positioner with 3 or 4 degrees of freedom on bearings and the precision vice that allows you to firmly clamp the pieces during measurements.\n\nThe calibration, thanks to the dedicated calibration sample, takes place guided by the software.\n\nCHARACTERISTICS:\nUnit of measure: \tMillimetres and inches\nExploration stroke (X): \t130 mm (5,12 in)\nMeasuring range (Z): \t50 mm (1,97 in)\nColumn travel (Y) \t320 mm (12,6 in) manual\nSampling interval (X): \t0,5 μm (0,02 μin)\nZ axis resolution: \t0,2 μm (0,008 μin)\nPositioning speeds: \t0-10 mm/s (0-7 in/s)\nMeasurement speed: 0.2 mm/s to 2 mm/s (from 0.008 in/s to 0.08 in/s)\nTip radius: \t20 μm (0,8 μin)\nCNC cycles: Automatic CNC measuring and positioning cycles with auto-comparion\nConnection: USB interface to Windows© PC\nLanguages: English, French, German, Italian, Spanish, Portuguese and Slovenian\nDimensions (L x D x H): \t1030 x 410 x 660 mm (41 x 16 x 26 in)\nTotal weight: 34 kg (75 lbs)\nSupply voltages: 110-240 V ; 50-60 Hz\nWorking temperatures: 15 - 25°C (59 - 77°F)\nSoftware: \tProfile Studio Basic\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and machine accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "use", "tool", "place", "50 mm", "length", "pieces", "height", "simple", "130 mm", "example", "T\" slot", "freedom", "elements", "programs", "software", "commands", "bearings", "4 degrees", "worktable", "positioner", "PC keyboard", "2D profiles", "dimensioning", "CAD functions", "intuitive way", "precision vice", "measuring range", "characterization", "series measurements", "various accessories", "standard configuration", "The PGS100 profilometer", "32 mm chisel measuring probe", "dedicated calibration sample", "The Profile Studio analysis program" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 33, "imageuri": "https://productimages.withfloats.com/actual/63c7b8fb7a4ce700014e0b1a.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7b8fb7a4ce700014e0b1a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:59:09.691Z", "updatedon": "2024-07-05T11:01:17Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pgs100-profilometer/33", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Contour Profilometer", "tags": [ "Profilometers", "Contour", "Contour Measurement", "Form Measurement", "CAD functions", "Automatic CNC positioning", "Automatic CNC measuring" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210c87dbdd2cd000107fe5a", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R500 Roundness Tester", "description": "R500 roundness tester is located at the top of machines for the characterization of revolution surfaces in the world panorama for what concerns the maximum dimensions of the object that can be measured; born from the thirty year experience that SM has in this field, it has been designed to measure bulky and heavy pieces, maintaining high accuracies.\n\nR500 features 3 metrological axes, pneumostatically supported, for measurement and positioning, which ensure fluent movements without frictions and remarkable sturdiness of the entire system.\n\nThe flagship application of R500 is the characterization of bulky particulars in the energy sector (turbines, compressors, bearings) where all the essential characteristics for the final quality of the product must be determined.\n\nThe motorized plate allows the automatic centering of the piece, executed with a procedure inside the Circom software.\n\nCHARACTERISTICS:\nPneumostatic plate\nPlatform diameter: 650 mm\nExpansion diameter: 1200 mm\nMaximum measureable diameter: 1300 mm\nAxial bearing capacity: 1500 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: 0,25 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm with automatic cycle\nLevelling range: ± 1°\nResolution: 0,009° (40k pts/rev)\n\nPneumostatic R axis\nUseful traverse length: 650 mm\nLinearity: ≤ 0,5 μm su 500 mm\nSpeed: 0,2 – 10 mm/s\nResolution: 1 μm\nC axis (Column with recirculating ball guides)\nUseful traverse length: 900 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution 0,1 μm\nPick-up Measurement positioning: In three positions (internal, external, lateral)\nMeasurement strength : Internal/external 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional with 8 mm ruby sphere", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "top", "field", "object", "turbines", "machines", "bearings", "procedure", "frictions", "compressors", "positioning", "measurement", "heavy pieces", "energy sector", "final quality", "entire system", "world panorama", "motorized plate", "Circom software", "high accuracies", "R500 SM Product", "characterization", "fluent movements", "bulky particulars", "maximum dimensions", "automatic centering", "3 metrological axes", "revolution surfaces", "flagship application", "remarkable sturdiness", "R500 Roundness Tester", "thirty year experience", "essential characteristics" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 30, "imageuri": "https://productimages.withfloats.com/actual/63c7c0971a09760001dba52c.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c0971a09760001dba52c.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:37:49.614Z", "updatedon": "2023-02-06T14:31:13Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//r500-roundness-tester/30", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness tester", "large Size Bearings measurement", "Form Measurement", "Roundness Measuring", "Cylindricity", "turbines measurement", "compressors measurement" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210c557584a740001165816", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R300 Laboratary Roundness Tester", "description": "R300 roundness tester is one of the best devices worldwide for the characterization of surfaces, born from thirty years of experience boasted by SM in this field, it was specifically designed to measure bulky and heavy pieces, with utmost accuracy.\nR300 features 3, pneumostatically supported, metrological measurement and positioning axes that ensure fluent movements without frictions and remarkable sturdiness of the entire system.\nThe main application of R300 consists in the characterization of large size bearings, where all those essential characteristics for the final quality of the product must be determined, among which roundness and race angles, which are measured by following the piece's profile with more axes working at the same time, thus generating a considerable number of measurements.\n\nCHARACTERISTICS:\n\nPneumostatic plate\nPlatform diameter: \t450 mm\nExpansion diameter: 800 mm\nMaximum measureable diameter: 1000 mm\nAxial bearing capacity: 1200 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: \t0,5 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm\nLevelling range: \t± 1°\nResolution: \t0,1°\n\nPneumostatic R axis\nUseful traverse length: 500 mm\nLinearity: ≤ 0,5 μm su 500 mm\nSpeed: 0,2 – 10 mm/s\nResolution: 0,1 μm\n\nC axis (pneumostatic column)\nUseful traverse length: 500 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution: 0,1 μm\n\nPick-up\nMeasurement positioning: In three positions (horizontal, vertical, lateral)\nMeasurement strenght : Internal/esternal 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional of lenght 80 - 150 – 240 mm\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "field", "bulky", "profile", "surfaces", "frictions", "same time", "experience", "race angles", "measurements", "heavy pieces", "thirty years", "best devices", "entire system", "R300 features", "final quality", "R300 SM Product", "utmost accuracy", "characterization", "positioning axes", "main application", "fluent movements", "large size bearings", "considerable number", "remarkable sturdiness", "R300 roundness tester", "metrological measurement", "essential characteristics", "R300 Laboratary Roundness Tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 29, "imageuri": "https://productimages.withfloats.com/actual/63c7c28845a22b0001e71c35.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c28845a22b0001e71c35.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:24:23.638Z", "updatedon": "2023-02-06T14:33:23Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r300-laboratary-roundness-tester/29", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness", "cylindricity", "large Size Bearings", "Laboratary Roundness Tester", "large size bearings" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ed122ce1902e40001dc4b6e", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Talysurf5_SeSurf Retrofit Package ", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nPre Owned Talysurf 5 – Retrofitted with SeSurf\n•\tFive Traverse Speeds 0.05mm to 2.5mm per sec\n•\t120mm mechanical Datum Traverse for Skid & No Skid\n•\tMotorised Column Stand\n•\tStylus Range: 1000 um\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tFive Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm\n•\tAnalysis of Profile, Unfiltered, Roughness & Waviness\n•\tResolution: 0,01 / 0.001 & 0.0001μm \n•\tSection Remove to delete un wanted data \n•\tHard Coded User Logo, Name, Location etc\n•\tFive fields for entering Job details\n•\tSpecials: Auto Save, Excel Export with Statistical. Parameters & More\n \n \nTalysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. \n\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\n\nSeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.\n\nSeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nTalysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 27, "imageuri": "https://productimages.withfloats.com/actual/5ed122cfebc2290001a5f70c.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ed122cfebc2290001a5f70c.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-05-29T14:57:18.919Z", "updatedon": "2024-07-04T09:34:56Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talysurf5-sesurf-retrofit-package-/27", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [ "Talysurf5", "120mm Traverse", "Roughnesss", "Camber", "Ra", "Rt", "Rz", "Retrofit", "Retrofitted machines", "Retrofit Pakage", "SeSurf Retrofit Package", "On Sale", "Surface Roughness", "Roughness Tester", "Roughness Measurement" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }