Home> Products> external printer

{ "products": [ { "_id": "6685562e996a061ed063d772", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT90G Portable Surface Roughness", "description": "RT90G roughness tester is unique in its category because it features a built-in calculation unit and measurement procedure, thus being the first ''All-in-one’’ roughness tester. Extremely compact and easy to handle, it conveniently allows positioning also on large size pieces, thanks to built-in micrometrics with 100 mm range. The shiny 3.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances are immediately displayed and can be downloaded on PC or printer using the external printer. The internal reference allows to perform analyses also on W waviness parameters, while the bistable pick-up holder allows measuring with one simple gesture, with or without skid, as required.\n\nCHARACTERISTICS:\nMeasurement range:\t±500μm\nResolution\t0,001 μm\nCut-off lenght\t0,25 – 0,8 - 2,5 mm\nCut-off number\tSelectable from 1 to 19\nTraverse lenght: \tUp to 50 mm\nPick-up:\tInductive, it can be rotated of 90° for lateral measurements\nMeasurement parameters \t\n54 parameters\n\n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsk, Rku, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, Pdc, PPc, R, Rx, AR, Wte, W, AW, Wx, Rke, Rpke, Rvke, Mr1e, Mr2e Rmax, R3z, R3zm)\n\nGraphs displayed:\tRoughness, waviness, primary, total, bearing capacity curve, and distribution of ordinates.\nUnit of measurement: \tMillimeters and inches\nInterface:TFT, 3.7'' colour graphic Touchscreen display and 3 waterproof membrane buttons\n\nLanguages: \tItalian, French, English, German, Spanish and Portuguese\nMemory: \tUp to 1000 measurements\nAccessories:\tRT90G roughness tester with SB10/60 pick-up, 110-230V battery charger, roughness sample, Case, User manual.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2,5 mm", "Mr2, Pt", "Mr2e Rmax", "User manual", "100 mm range", "54 parameters", "50 mm Pick-up", "Cut-off number", "Cut-off lenght", "icon interface", "Traverse lenght", "SB10/60 pick-up", "external printer", "calculation unit", "inches Interface", "roughness sample", "Measurement range", "large size pieces", "internal reference", "one simple gesture", "relative tolerances", "lateral measurements", "measurement procedure", "W waviness parameters", "measurement parameters", "RT90G roughness tester", "bistable pick-up holder", "110-230V battery charger", "RT90G Portable Surface Roughness", "colour graphic Touchscreen display", "Up to 1000 measurements Accessories", "shiny 3.7’’ colour touchscreen display", "primary, total, bearing capacity curve", "3 waterproof membrane buttons Languages" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 46, "imageuri": "https://productimages.withfloats.com/actual/5f7b1e74ff319600013478f7.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1e74ff319600013478f7.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:46:22.181Z", "updatedon": "2024-07-04T09:41:16Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt90g-portable-surface-roughness/46", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Surface Roughness Tester", "tags": [ "Portable Roughness", "Surface Roughness", "ISO standards", "Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "66855489bb6dd81a38b9b1d4", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT-10 Plus", "description": "Palmtop Roughness Tester RT-10 Plus\n\n•\tTechnical specification\n•\tRoughness parameters according to ISO 4287: Ra, Rq, Rt, Rz, Rc, RSm, Rmr & Rmax Special.\n•\t4 roughness parameters according to ISO 12085: Pt, R, AR, Rx. Measuring length: up to 16 mm.\n•\tMeasurement range: ±20 µm and ±80 µm.\n•\tCut-off lengths: 0.25 – 0.8 – 2.5 mm.\n•\tGaussian filter according to ISO 11562.\n•\tDisplay: 16-character, 2-line LCD.\n•\tTouch keyboard of 4 keys.\n•\tRechargeable battery incorporated.\n•\tMulti language: Italian, French, English, German and Spanish.\n•\tBuffer of 30 measurements.\n•\tSerial data output.\n•\tGauge rotable through 90° for lateral measurements.\n•\tResolution 0.01 µm and 0.04 µm.\nThe portable, palmtop roughness tester RT-10 permits evaluation of the most varied roughness parameters directly on the site of production offering, in a compact package, the advantages of being easy to carry, simple to use and reliability of measurement.\n\nDesigned for use on the shop floor, it is shielded against external agents by a special protective membrane. It can measure in difficult positions, including when held in the hand, in the vertical traverse position. The gauge may be turned by 90° to permit measurements in grooves or between shoulders. The 400x250 mm measurement support in black granite with adjustable steel column can be used with RT-10 to measure pieces that are bulky or difficult to position.\n\nComplete Presentation of Results\n\nThis instrument can be connected to the PR-10, a 24-column printer providing certification both of the parameters measured, together with indication of the tolerances, and of the profile drawing. Using the serial output line, data can be downloaded to a Personal Computer running the Remote-10 program under Windows 98/ME/NT4/2K, XP with which measurements can be made, data processed, parameters displayed and drawings of the profile presented using various options. It has a buffer of 30 measurements which can be displayed and printed at any time. The most common functions, such as recalling results, or cut-offs and starting measurements, can be accessed directly using the keyboard, while others are available by activating suitable, easy to comprehend menus. Among other things, these menus permit the presetting of tolerance thresholds which, when linked to one of the measurable parameters, facilitate series checks.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "±80 µ", "16 mm", "0.04 µ", "4 keys", "±20 µm", "2.5 mm", "ISO 4287", "ISO 12085", "RT-10 Plus", "shop floor", "2-line LCD", "other things", "Rmax Special", "series checks", "black granite", "Touch keyboard", "suitable, easy", "Multi language", "30 measurements", "profile drawing", "various options", "external agents", "compact package", "Gaussian filter", "Cut-off lengths", "common functions", "Measuring length", "Remote-10 program", "Personal Computer", "24-column printer", "Measurement range", "Serial data output", "serial output line", "difficult positions", "production offering", "lateral measurements", "tolerance thresholds", "Rechargeable battery", "measurable parameters", "Complete Presentation", "4 roughness parameters", "Technical specification", "adjustable steel column", "vertical traverse position", "varied roughness parameters", "special protective membrane", "400x250 mm measurement support", "portable, palmtop roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 56, "imageuri": "https://productimages.withfloats.com/actual/5f7b1ba199d7e200019867cd.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1ba199d7e200019867cd.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:21.626Z", "updatedon": "2024-07-03T13:55:42Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt-10-plus/56", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Surface Roughness Tester", "tags": [ "Portable Roughness", "Roughness", "Surface Roughness", "Surface Metrology", "Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "668556664bffde21ec92eb2b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R500 Roundness Tester", "description": "R500 roundness tester is located at the top of machines for the characterization of revolution surfaces in the world panorama for what concerns the maximum dimensions of the object that can be measured; born from the thirty year experience that SM has in this field, it has been designed to measure bulky and heavy pieces, maintaining high accuracies.\n\nR500 features 3 metrological axes, pneumostatically supported, for measurement and positioning, which ensure fluent movements without frictions and remarkable sturdiness of the entire system.\n\nThe flagship application of R500 is the characterization of bulky particulars in the energy sector (turbines, compressors, bearings) where all the essential characteristics for the final quality of the product must be determined.\n\nThe motorized plate allows the automatic centering of the piece, executed with a procedure inside the Circom software.\n\nCHARACTERISTICS:\nPneumostatic plate\nPlatform diameter: 650 mm\nExpansion diameter: 1200 mm\nMaximum measureable diameter: 1300 mm\nAxial bearing capacity: 1500 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: 0,25 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm with automatic cycle\nLevelling range: ± 1°\nResolution: 0,009° (40k pts/rev)\n\nPneumostatic R axis\nUseful traverse length: 650 mm\nLinearity: ≤ 0,5 μm su 500 mm\nSpeed: 0,2 – 10 mm/s\nResolution: 1 μm\nC axis (Column with recirculating ball guides)\nUseful traverse length: 900 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution 0,1 μm\nPick-up Measurement positioning: In three positions (internal, external, lateral)\nMeasurement strength : Internal/external 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional with 8 mm ruby sphere", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "1 μ", "6 rpm", "3 rpm", "15 mm", "10 mm", "±5 mm", "150 mN", "0,5 μm", "600 mm", "900 mm", "C axis", "1500 kg", "1300 mm", "1200 mm", "±1000 μm", "plate level", "500 mm Speed", "heavy pieces", "final quality", "energy sector", "entire system", "plate surface", "Radial run-out", "world panorama", "Maximum height", "Centring range", "three positions", "Linearity error", "manual rotation", "Circom software", "high accuracies", "motorized plate", "650 mm Linearity", "fluent movements", "8 mm ruby sphere", "bulky particulars", "Measurement range", "maximum dimensions", "Expansion diameter", "3 metrological axes", "revolution surfaces", "automatic centering", "Pneumostatic R axis", "Internal/external 20", "Measurement strength", "flagship application", "remarkable sturdiness", "R500 Roundness Tester", "Useful traverse length", "Axial bearing capacity", "thirty year experience", "essential characteristics", "recirculating ball guides", "Maximum measureable diameter", "Pick-up Measurement positioning", "automatic cycle Levelling range", "Pneumostatic plate Platform diameter" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 47, "imageuri": "https://productimages.withfloats.com/actual/63e10f3245c48e0001eb3324.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63e10f3245c48e0001eb3324.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:18.891Z", "updatedon": "2024-07-03T13:47:18.891Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r500-roundness-tester/47", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "", "", "roundness tester", "", "large Size Bearings measurement", "", "Form Measurement", "", "Roundness Measuring", "", "Cylindricity", "", "turbines measurement", "", "compressors measurement", "" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685515b7697320a5c5e00a6", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Profilometer PGS 200 Contour Measuring Instrument", "description": "The new profilometer PGS 200 combines the need to have a highly versatile tool, which ensures ease of installation in production environments, however, that in measuring rooms to ensure the accuracy of the measures to be always certain of the results obtained. With the concept \"all at once\" the PGS 200 with a few clicks is now operating through the Profile Studio analysis software in a short time the operator is able to measure even the most complex\n\nKey Features\n• Structure \"all in one\", no external electronics.\n• Treated alloy base that combines high rigidity and light weight.\n• Measuring range Y- 50 mm, X- 220mm\n• Measurement speed: 0.5, 1, 2 mm / sec\n• Angle measurement: up 70 °, 85 ° down.\n• CNC column position 320 mm. Ability to run automatic cycles, not in manual column\n• Autocomparazione of measurements.\n• © Windows software with aid to the operator through the Wizard to the most complex operations\n• Advanced CAD functions (tolerances, errors of form)\n\nThe new PGS 200 profilometer is a project where the goal was to create a system for the characterization of surfaces by extreme flexibility. Following this philosophy has created a machine that, thanks to the considerable size and weight reduction (inside the machine weighs just over 40 kg) allows easy installation in any environment, which may be metrology laboratory or production line.\n\nThe acquisition system is based on a 200 PGS traverse movement, through which the polar probe is kept in contact with the work piece. The system is combined with two Nano sensors guarantees result with in a working area of 50mm x 220 mm while maintaining a high level of accuracy.\n\nThe base is made of light alloy; this combination provides a significant reduction in weight while maintaining a high resistance to scratching and wear. The column positioning allows you to move the Traverse up to a height of 380mm above base.\n\nUsing the positioner mounted on the base of the instrument, the loading and unloading of the pieces are greatly simplified since the positioner can be moved along a special guide allowing you to load the piece off from work and then bringing it close with precision. With the software Profile Studio study, all the functions necessary for the characterization of the profile are easily accessible thanks to the tool bar right where every family to a different color (lines, arcs, points), this makes each function easily recognizable and accessible with a single clicks.\n\nIn the tool bar on the left of the group is represented in the measured profiles so you can easily switch from an atrium or, if desired, assist them in a multi-screen. Same bar, also consists the major functions for instrument control including the position of the axes and buttons for starting measurement and calibration position. With this interface the operator with a glance full control of the application.\n\nFor more complex procedures used is the philosophy of the Wizard or the operator is guided step by step through each elementary operations,\ngreatly simplifying the entire procedure. This type of assistance is used for example for calibration and the search for points of maximum\nand minimum during the placement of a piece.\n\nThe CAD program is the basis of highly advanced, all entities are dynamic and therefore editable after insertion. With the functions \"Best Fit\" the operator with a single click you can place a arc or a line on the profile because the program will automatically recognize the area to the\nminimum error in which include this element. Through the program you can control every movement of the tool by setting the measurement parameters for each of the measures for automated* repeated measurements, you can also set facilitating the movement of the limits in this way, the positioning during difficult measures such as inside holes and groves.\n\nThrough the \"Autocomparazione\" the program automatically rebuilds, measured on a new profile, construction and dimensional tolerances of these making a reference profile, so high speed control pieces of the same lot.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2 mm", "40 kg", "tool bar", "same lot", "Best Fit", "Same bar", "X- 220mm", "work piece", "short time", "high level", "CAD program", "polar probe", "light alloy", "new profile", "working area", "light weight", "single click", "Key Features", "minimum error", "special guide", "manual column", "high rigidity", "50mm x 220 mm", "versatile tool", "production line", "major functions", "different color", "high resistance", "Measuring range", "measuring rooms", "weight reduction", "entire procedure", "automatic cycles", "easy installation", "Angle measurement", "considerable size", "reference profile", "Measurement speed", "difficult measures", "acquisition system", "column positioning", "complex procedures", "complex operations", "© Windows software", "instrument control", "Treated alloy base", "extreme flexibility", "CNC column position", "glance full control", "calibration position", "metrology laboratory", "external electronics", "new profilometer PGS", "repeated measurements", "elementary operations", "significant reduction", "dimensional tolerances", "measurement parameters", "Advanced CAD functions", "production environments", "new PGS 200 profilometer", "200 PGS traverse movement", "high speed control pieces", "two Nano sensors guarantees", "software Profile Studio study", "Profile Studio analysis software", "Profilometer PGS 200 Contour Measuring Instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 38, "imageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:25:47.401Z", "updatedon": "2024-07-03T13:30:00Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/profilometer-pgs-200-contour-measuring-instrument/38", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "contour", "Contour Measurement", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "668550ac4efde106e890d658", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Roundness Tester RMI-D420", "description": "Roundness Introduction\n\nRoundness measuring instrument is benchmark against precision rotary center, the quantitative evaluation of the cross-section roundness is made by measuring the radius varitation of actual contour of workpiece in different angle position to rotary center by sensor. It is used to measure the cross-section roundness and coaxiality of internal rotation and external rotation and face runout, etc.\n\nMeasurement Capability\n\nEvaluation item: Roundness, concentricity, coaxiality, parallelism, perpendicularity, flatness,Single radial runout, Single axial runout\n\nAnalytical ability: Spectrum analysis, gap/burr automatically removed, waveform analysis.\n\nRoundness evaluation (4 methods): Minimum zone method (MZC), least square (LSC), minimum circum circle (MCC) and maximum inscribed circle (MIC).\n\nRoundness filtering gear: 1-15upr,1-50upr,1-150upr,1-250upr,1-500upr,15-100upr,15-500upr,2-15upr\n\nFiltering expression: Gaussian (ISO standard) Magnification: input range 1-100000\n\nRoundness Measuring Instrument RMI-D420\n\nTechnical specifications: \nRotary table \nBearing Type : Gas bearing\nRotation accuracy:(0.025+6H/10000)um\nRotating speed: 6rpm\nAdjust table diameter : 180mm\nTable loading capacity : 15kg\nRotation diameter : 420mm\nMax measure diameter : 250mm\n\nColumn (Z-axis )\nColumn transverse travel : 320mm (electric)\nMax detection depth : 100mm (min inner diameter): 30mm)\n\nHorizontal arm (X-axis) \nHorizontal movement : 150mm (manual)\nProtrusion amount : 25mm\n\nDetector\nAcquisition device : Circle grating sensor\nCircumference of sampling points : 4096 points\nSensor type : Inductive Sensor\nSensor range : ±300μm\nSensor resolution : 0.001μm\n\n*The above machine specifications can be customized and upgraded according to demand\n\nSoftware functions\n1) The software supports Chinese, English, and supports XP, win7, win8, win10 operating systems.\n2) The standard report has various evaluation methods, and the parameters in the test report can be\nadded and deleted as needed.\n3) With commutator module, it can evaluate single-chip true circle, adjacent segment difference and\ngroove segment difference, and the measurement result can be deleted automatically or manually.\n4) Software can assist the rotating spindle to adjust the center and level, improve efficiency and save\ntime\n5) Measurement results can choose ISO statistical report or ISO standard report.\n6) Can perform spectrum analysis on contour graphics.\n\nFor complete Catalogue, Contact Us.\n\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "4096 points", "input range", "test report", "Sensor type", "Gas bearing", "face runout", "Sensor range", "250mm Column", "25mm Detector", "Horizontal arm", "Rotating speed", "actual contour", "inner diameter", "sampling points", "Evaluation item", "contour graphics", "rotating spindle", "Inductive Sensor", "commutator module", "Sensor resolution", "Protrusion amount", "waveform analysis", "Spectrum analysis", "radius varitation", "Rotation accuracy", "external rotation", "internal rotation", "Software functions", "complete Catalogue", "measurement result", "Acquisition device", "Horizontal movement", "ISO standard report", "Max detection depth", "Minimum zone method", "Filtering expression", "Roundness evaluation", "Max measure diameter", "Single radial runout", "Circle grating sensor", "minimum circum circle", "Adjust table diameter", "machine specifications", "Measurement Capability", "15kg Rotation diameter", "ISO statistical report", "quantitative evaluation", "cross-section roundness", "precision rotary center", "single-chip true circle", "win10 operating systems", "Technical specifications", "Column transverse travel", "Roundness filtering gear", "maximum inscribed circle", "different angle position", "groove segment difference", "Rotary table Bearing Type", "various evaluation methods", "ISO standard) Magnification", "adjacent segment difference", "180mm Table loading capacity", "Single axial runout Analytical ability", "Roundness Measuring Instrument RMI-D420", "Roundness Tester RMI-D420 Roundness Introduction" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 37, "imageuri": "https://bizimages.withfloats.com/actual/30ac70ad9c6f423e9b095082b0972f96.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/30ac70ad9c6f423e9b095082b0972f96.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:22:52.255Z", "updatedon": "2024-07-03T13:22:52.255Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/roundness-tester-rmi-d420/37", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Roundness Tester", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "668529309c181b1abc76b75a", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Portable Roughness Tester SRT-9000C", "description": "SRT-9000C Surfaces roughness tester is suitable for shop floor use and mobile measure to need of a small handheld instrument, it operation simple, function overall, measure fast, accuracy stability, take convenience.\n\nThis tester applies to production site and can be used to measure surface roughness of various machinery-processed parts also capable of evaluating surface textures with a variety of parameters according to various national standards and ANSI, DIN, JIS, ISO international standard.\n\nThe measurement results are displayed digital & graphically on the OLED,and output to\nthe printer.\n\nFEATURE\n1) Electromechanical integration design, small size, light weight, easy to operation.\n2) DSP chip control and data processing, high speed, low power consumption.\n3) 128 × 64 OLED dot matrix display, digital or graphic highlight display; no viewing angle.\n4) 14 parameters: Ra, Rq, Rz,Rt, Rp, Rv, R3z, R3y, RzJIS, Rs, Rsk, Rku, Rsm, Rmr\n5) Built-in lithium-ion rechargeable battery and control circuit, high capacity, no memory effect.\n6) Reliable circuit and software design of prevent the motor stuck.\n7) Large capacity data storage, can store 100 item of raw data and waveforms.\n8) With automatic sleep, automatic shutdown power-saving features.\n9) All parameters can be printed or print any of the parameters which set by the user.\n10) Resolution： 0.001um， measuring error＜10%， repeatability 6%,17.5mm measuring range.\n11) With measuring software can connected to the computer and printer.\n12) Filter：RC, PC-RC, GAUSS, D-P\n13) Granite Measurement Stand ( Optional) Stand size：300*450*50mm\nZ axis height：400mm Hand wheel range：50mm. Rotation angle：135°\n\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "100 item", "raw data", "high speed", "Stand size", "small size", "light weight", "memory effect", "viewing angle", "high capacity", "Z axis height", "Rotation angle", "mobile measure", "shop floor use", "production site", "software design", "control circuit", "data processing", "automatic sleep", "Reliable circuit", "surface textures", "DSP chip control", "surface roughness", "accuracy stability", "SRT-9000C Surfaces", "measuring software", "measurement results", "low power consumption", "17.5mm measuring range", "400mm Hand wheel range", "Portable Roughness Tester", "Granite Measurement Stand", "small handheld instrument", "graphic highlight display", "ISO international standard", "various national standards", "Large capacity data storage", "lithium-ion rechargeable battery", "128 × 64 OLED dot matrix display", "various machinery-processed parts", "Electromechanical integration design", "automatic shutdown power-saving features" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 36, "imageuri": "https://bizimages.withfloats.com/actual/99c85c0e50a34f63a4bd3d3dee29984d.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/99c85c0e50a34f63a4bd3d3dee29984d.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T10:34:24.47Z", "updatedon": "2024-07-03T11:15:35Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//portable-roughness-tester-srt-9000c/36", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Surface Roughness Tester", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "63c7e7b55626f700012bf788", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RTP80 Portable roughness tester", "description": "RTP80 roughness tester, easy to handle and user-friendly, allows to characterize even the most complex surfaces, easily and conveniently. The shiny 5.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances can be printed immediately using the thermal printer built in the instrument. The graphs and parameters are all of interactive type, to allow the operator to choose how to present the results. RTP80 is suitable for production departments, where the measurement settings for batch analyses can be protected by password, and it is also ideal to be used in metrological laboratories where statistical analyses can be carried out on the measurements taken. RTP80 calculation unit can be connected up to 4 measurement translators for various types of pieces.\n\nCHARACTERISTICS:\nMeasurement range: ±500μm ( TL90 )\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 - 8 mm\nCut-off number: Selectable from 1 to 19\nTraverse lenght: Up to 50 mm ( TL90 )\nPick-up: Inductive, it can be rotated of 90° for lateral measurements\nPrinter: Integrated, thermal printer\nMeasurement parameters:54 parameters\n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsk, Rku, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, Pdc, PPc, R, Rx, AR, Wte, W, AW, Wx, Rke, Rpke, Rvke, Mr1e, Mr2e Rmax, R3z, R3zm)\n\nGraphs displayed: Roughness, waviness, primary, bearing capacity curve, and distribution of Ordinates.\nUnit of measurement: Millimeters and inches\nInterface: TFT, 5.7'' colour graphic Touchscreen display and 3 waterproof membrane buttons\nLanguages: Italian, French, English, German, Spanish, Portuguese\nMemory: Up to 1000 measures\nAccessories: RTP80 roughness tester, Translator (TS4, TS7, TL90, Rotarix 55 or Rotarix 125), 110-230V battery charger, roughness sample, case, user manual\n\nCONNECTABLE TRANSLATORS:\n\nTS7\nCompact and easy to handle translator, it allows taking measurements in the most difficult conditions, by simply holding it in one hand. Maximum traverse length of 25 mm\n\nTL90\nProfessional translator with internal metrological reference that allows characterizing W waviness parameters\n\nPositioning micrometrics on the piece, with traverse length of 110 mm, bistable nib for measurements with and without skid. Maximum traverse length of 50 mm.\n\nROTARIX 55\nRotary unit with horizontal axis for measuring radial roughness (e.g. pipes, balls) on medium-size pieces, measurement diameter from Ø3 ÷ Ø60 mm.\n\nROTARIX 125\nRotary unit with vertical axis for measuring radial roughness on bulky pieces, measurement diameter from Ø10 ÷ Ø160 mm.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "radial roughness", "measurement settings", "3 waterproof membrane", "RTP80 roughness tester", "measurement parameters", "RTP80 calculation unit", "production departments", "Maximum traverse length", "4 measurement translators", "metrological laboratories", "colour touchscreen display", "surface metrology products", "RTP80 Portable roughness tester", "internal metrological reference", "colour graphic Touchscreen display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/63c7e7b759521a0001845857.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7e7b759521a0001845857.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-18T12:36:05.279Z", "updatedon": "2024-07-05T10:57:57Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rtp80-portable-roughness-tester/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Roughness", "Roughness Measurement", "Surface Roughness", "Surface Finish", "Ra", "Roughness Mean" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "6210dfef6cf79500017ec298", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "LITEsurf Palmtop Roughness", "description": "The new LITEsurf roughness tester was born from the forty-year experience that SM has in measuring and designing roughness tester for production areas. This is why we know well what are the characteristics that are really necessary for an instrument of this family that has to go to work there right with you: compactness, robustness, ease of use and clarity of the results, these are the characteristics that they will make LITEsurf the ideal partner for roughness characterizing on your parts. Are you considering buying a new palmtop roughness tester? We accept the challenge, because we are sure that the new LITEsurf roughness tester is a step forward compared to the other opponents! Are you not convinced? We give you 5 good reasons!\n\nConnectivity: Today technology allows us to share information quickly and easily, can your new roughness tester do it? The new LITEsurf, thanks to the integrated Bluetooth and USB connection, allows you to connect the smartphones, tablets and PCs in an intuitive and fast way, then sharing information with the rest of the world.\n\nFlexibility: you want, with a single instrument, to measure zones horizontally, vertically, up / down or sideways, many will answer you impossible, but LITEsurf can do all this. Through the probe rotatable laterally by 90 ° and to the balanced and preloaded sensor, each area of the piece can be measured.\n\nRobustness: A robust palmtop roughness tester with few plastic and a lot of metal? Difficult to find on the market you will think. But is not so! The LITEsurf has a light alloy body machined from solid combined with a PC / ABS body that guarantee high rigidity with high impact resistance. The tool that is not afraid of the bumps and accidental falls inevitable in normal use in production.\n\nReporting: Do you need to generate customized reports with company logo, description, notes and even a photo of the measured detail and save them in a standard format such as in PDF or Excel for easy sharing and archiving? Many will offer you additional paid software and perhaps not so flexible; LITEsurf by connecting to an external device such as your Smartphone or tablet on which the free \"Roughness studio base\" APP is installed, can do all this with ease.\n\nBattery life: How often are battery-powered devices discharged just when they are needed? We as you know it well, for this reason a sophisticated charge management system has been integrated into the LITEsurf which performs a full charge in 50 minutes, guaranteeing 10 hours of work and at least 300 roughness measurements. Don't you have this time? Just give us 3 minutes of charge and we guarantee you to perform at least 20 measurements.\n\nThe LITEsurf is charged via the same cable and charger that you use to charge your Smartphone or Tablet (USB type C), a nice simplification!\n\nThe instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.\n\nFEATURES:\nMeasurement range: 250 um (+ 50 um -200 um)\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 17,5 mm\nPick up: Optical, it can be rotated of 90° for lateral measurements\nMeasurement parameters: 81 roughness parameters\n8 Parameters ISO: Ra, Rq, Rt, Rz, Rc, Rmax, RSm, RPc,\nMOTIF: Pt, R, AR, Rx, Ppc\nUnit of measurement: Millimeters and inches\nInterface: OLED graphic display and 3 waterproof membrane buttons\nLanguages:Italian, French, English, German, Spanish, Portuguese\nMemory: Up to 18000 measurements with only parameters Up to 30 measurements with graph\nAccessories: LITEsurf roughness tester, USB battery charger, USB cable, 8 mm diameter end-plug for connection to stand, roughness sample, plastic case, User Manual\n\nSalbro Engineers are the authorized dealers for LITEsurf in India ", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "PCs", "use", "90 °", "rest", "ease", "probe", "zones", "world", "Today", "parts", "piece", "family", "tablets", "results", "clarity", "balanced", "fast way", "Bluetooth", "challenge", "intuitive", "integrated", "robustness", "technology", "smartphones", "information", "Flexibility", "compactness", "Connectivity", "ideal partner", "5 good reasons", "USB connection", "other opponents", "characteristics", "preloaded sensor", "production areas", "single instrument", "LITEsurf SM Product", "new roughness tester", "forty-year experience", "LITEsurf Palmtop Roughness", "new palmtop roughness tester", "new LITEsurf roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 34, "imageuri": "https://productimages.withfloats.com/actual/63c7b5da59521a000183ffc0.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7b5da59521a000183ffc0.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T12:17:51.518Z", "updatedon": "2024-07-05T10:51:01Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/litesurf-palmtop-roughness/34", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Roughnesss", "Surface Roughness", "Palmtop Roughness", "Ra", "Surface Metrology", "Roughness Tester", "surface analysis", "Rz", "Roughness Tester", "Portable Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "6210ca3f6cf79500017ec1d7", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "WARPsurf ", "description": "The WARPsurf is a turning point in the world panorama of the instruments for surface analysis, because it gives in a single portable instrument the capability to perform both roughness and profilometry analysis.\n\nThe brilliant 7’’ touch screen display, combined with modern user interface, allows the user to become quickly familiar with the instrument, setting easily the measure parameters, positioning on the piece and performing the analysis.\n\nThe instrument is equipped with a 1GHz microprocessor that allows to have a fluid system and fast processing even with complex profiles.\n\nExtremely compact and handy, the WARPsurf allows to position easily on big pieces thanks to the integrated micrometric that covers 110 mm range.\n\nThanks to the standard USB interface, it is possible to plug a regular USB drive to save images or PDF reports; using this interface the instrument can connect to a common desktop printer and directly print on A4.\n\nThe instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.\n\nFEATURES:\nMeasurement range : ±1500μm\nResolution : 0,0001 µm - (0,1nm)\nCut-off lenght : 0,08 - 0,25 - 0,8 - 2,5 - 8 mm\nCut-off number : Selectable from 1 to 20 (1 to 6 for 8 mm cut-off)\nTraverse lenght : Up to 60 mm\nPick up \tInductive, it can be rotated of 90' for lateral measurements and interchangeable styluses\n\nMeasurement parameters \t81 roughness parameters\nRa, Rq, Rt, Rz, Rp, Rv, Rc, Rsk, Rku, RSm, RΔq, RΔa, Rmax, Rδc, Rmr, Rmr(c), RPc, RLo, Rlr, Rzjis, RHSC, R3z, hp, Ep\nPa, Pq, Pt, Pq, Pv, Pc, Psk, Pku, PSm, PΔq, Pδc, PPc, PLo, Plr, PHSC\nWa, Wq, Wt, Wz, Wp, Wv, Wc, Wsk, Wku, WSm, WΔq, Wδc, WPc, WLo, Wlr, WHSC\nRk, Rpk, Rvk, Mr1, Mr2, A1, A2, Rpk*, Rvk*, WDSm, WDc, WDt\nR, AR, Rx, W, Aw, Wx, Wte, Rke, Rpke, Rvke, Mr1e, Mr2e, A1e, A2e\n\nAvailable charts: Roughness, Waviness, Dominant waviness, Primary, Material ratio curve (bearing) and height amplitude distribution (density).\nUnit of measurement : Millimeters and inches\nUser interface : Color display touchscreen TFT, 7 inches, 3 impermeable membrane switches\nLanguages: Italian, French, Inglese, German, Spanish, Portuguese, Japanese, Chinese, Korean\nMemory \tUp to 4000 measurements for roughness – Up to 1000 for profilometry\nCAD : Functions to process the integrated profile,\nPoints: carthesian – on the profile – intersection – limit – maximum - minimum\nLines: best-fit – polar – interrupted - between two or more points – parallel\nArcs: best-fit – interrupted - between three or more points – center and radius – tangent\nDimensions: Aligned – Vertical – Horizontal – Radius – Angle – Line-point distance\nAdvanced: Axis alignment – Z magnification\nVisualization: Pan – Zoom\nPrinting : 1- Capability to print on a common USB desktop printer in A4 format (Example: HP deskjet)\n2- Capability to print to PDF on a USB drive\n3- Printing on a PR11 device using Bluetooth connection\nEquipment : WARPsurf roughness tester with SB300 magnetic probe and stylus 1-Y roughness, battery charger 110-230V, roughness specimen, plastic case, user manual\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "A4.", "images", "capability", "big pieces", "instruments", "PDF reports", "110 mm range", "fluid system", "The WARPsurf", "turning point", "world panorama", "fast processing", "surface features", "surface analysis", "complex profiles", "dimensional ones", "regular USB drive", "measure parameters", "1GHz microprocessor", "WARPsurf SM Product", "profilometry analysis", "modern user interface", "standard USB interface", "integrated micrometric", "common desktop printer", "interchangeable styluses", "Portable Roughness Tester", "single portable instrument", "brilliant 7’’ touch screen display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/63c7bea07a4ce700014e0efa.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7bea07a4ce700014e0efa.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:45:19.62Z", "updatedon": "2024-07-05T10:55:55Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/warpsurf-/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "surface analysis", "WARPsurf", "roughness parameters", "Roughness", "Waviness", "Dominant waviness", "Material ratio curve (bearing)", "height amplitude distribution", "Ra", "Surface Roughness", "Surface Metrology", "Roughness Tester", "roughness average", "Roughness" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }