Home> Products> personal computer

{ "products": [ { "_id": "6685560f9bd8290644d801af", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Talysurf5_SeSurf Retrofit Package ", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nPre Owned Talysurf 5 – Retrofitted with SeSurf Ready for Immediate Dispatch\n•\tFive Traverse Speeds 0.05mm to 2.5mm per sec\n•\t120mm mechanical Datum Traverse for Skid & No Skid\n•\tMotorised Column Stand\n•\tStylus Range: 1000 um\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tFive Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm\n•\tAnalysis of Profile, Unfiltered, Roughness & Waviness\n•\tResolution: 0,01 / 0.001 & 0.0001μm \n•\tSection Remove to delete un wanted data \n•\tHard Coded User Logo, Name, Location etc\n•\tFive fields for entering Job details\n•\tSpecials: Auto Save, Excel Export with Statistical. Parameters & More\n \n \nTalysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. \n\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\n\nSeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.\n\nSeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nTalysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2.5 mm", "0.8 mm", "2CR PC", "0.25 mm", "0.08 mm", "Auto Save", "high level", "Job details", "Five fields", "26 Roughness", "Excel Export", "Stylus Range", "The Software", "Base surface", "data analysis", "easy alignment", "Owned Talysurf", "profile height", "surface texture", "other conditions", "Machine Pictures", "surface roughness", "assessment length", "3 digital filters", "Retrofit Packages", "The Manual Column", "incomplete picture", "Immediate Dispatch", "Three Filter Modes", "Pick Up Stylus tip", "Waviness parameters", "laboratory standard", "Unfiltered profiles", "Bearing Ratio curve", "cutoff wave lengths", "appropriate analysis", "accurate acquisition", "measurement accuracy", "Five Traverse Speeds", "Hard Coded User Logo", "Five Filter Cut Offs", "Motorised Column Stand", "performance reliability", "respective Manufactures", "best industry Standards", "The Talysurf5 instrument", "12 month warranty period", "SeSurf computer Interface", "minimum capital investment", "The Granite Base Tee slots", "Traditional measurement methods", "120mm mechanical Datum Traverse", "Talysurf5_SeSurf Retrofit Package", "Effective surface characterization", "complex, interrelated characteristics", "22 different Unfiltered Profile parameters" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 45, "imageuri": "https://productimages.withfloats.com/actual/5fbccf96c22f4100014b8c47.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5fbccf96c22f4100014b8c47.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:51.329Z", "updatedon": "2024-07-03T13:45:51.329Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talysurf5-sesurf-retrofit-package-/45", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "66855600c0e30a1804aed583", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roughness & Waviness", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nDescription :\n• SeSurf User Interface to Control, Measure and Position\n• Raw Profile ( Best Fit Line, Curve, Slope Remove)\n• Unfiltered profile Analysis (24 parameters)\n• Roughness profile Analysis (24 parameters)\n• Waviness profile Analysis (24 parameters)\n• Three Filter Modes: Gaussian, 2CR & 2CR PC\n• Bearing Ratio Curve Parameters\n• Crowning (Camber Measurements)\n• Multi Data Plot\n• Specials programs for Analysis can also be developed\n\nSeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use.\nThe Software is User friendly and Powerful.\nSeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus\ndecreasing Time and improving Productivity\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis.\nTraditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics.\nSeSurf incorporates the best industry Standards for data analysis.\nData acquired from the instrument is represented graphically in Raw, Unfiltered, Roughness and Waviness modes.\nRaw data acquired can be analyzed for Slope Removal, Best Fit Line and Best Fit Arc which ever suits the form of the job.\nThere is also a provision for the user to omit areas, unwanted for further analysis.\nUnfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Guassian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\nSeSurf provides 14 parameters for Unfiltered Profiles and 24 for Roughness and Waviness parameters. It also enables the user to perform Statistical analysis on measured results.\nSeSurf’s Bearing Ratio curve enables the user to asses contact/area at a given depth from profile height in percentage to the assessment length.\nParameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nSeSurf Machine Retrofit comes with 12 months free warranty.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2.5 mm", "0.8 mm", "2CR PC", "0.25 mm", "0.08 mm", "Raw data", "later date", "Raw Profile", "Best Fit Arc", "14 parameters", "Slope Removal", "data analysis", "Best Fit Line", "Waviness modes", "profile height", "surface texture", "Multi Data Plot", "other conditions", "Machine Pictures", "assessment length", "3 digital filters", "Specials programs", "surface roughness", "Retrofit Packages", "incomplete picture", "Three Filter Modes", "Waviness parameters", "Camber Measurements", "Unfiltered profiles", "laboratory standard", "cutoff wave lengths", "accurate acquisition", "Statistical analysis", "appropriate analysis", "PC Retrofit Roughness", "SeSurf User Interface", "respective Manufactures", "SeSurf Machine Retrofit", "12 months free warranty", "best industry Standards", "Waviness profile Analysis", "SeSurf computer Interface", "Roughness profile Analysis", "Unfiltered profile Analysis", "Bearing Ratio Curve Parameters", "Traditional measurement methods", "Effective surface characterization", "complex, interrelated characteristics" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/5ea9de9350b2c500013da0ef.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ea9de9350b2c500013da0ef.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.936Z", "updatedon": "2024-07-03T13:51:05Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pc-retrofit-roughness-waviness/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SeSurf Roughness Retrofit ", "category": "Surface Roughness Retrofit", "tags": [ "Roughness", "Waviness", "Analysis", "Roughness Average", "Retrofit", "Rz", "Ra" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "668529309c181b1abc76b75a", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Portable Roughness Tester SRT-9000C", "description": "SRT-9000C Surfaces roughness tester is suitable for shop floor use and mobile measure to need of a small handheld instrument, it operation simple, function overall, measure fast, accuracy stability, take convenience.\n\nThis tester applies to production site and can be used to measure surface roughness of various machinery-processed parts also capable of evaluating surface textures with a variety of parameters according to various national standards and ANSI, DIN, JIS, ISO international standard.\n\nThe measurement results are displayed digital & graphically on the OLED,and output to\nthe printer.\n\nFEATURE\n1) Electromechanical integration design, small size, light weight, easy to operation.\n2) DSP chip control and data processing, high speed, low power consumption.\n3) 128 × 64 OLED dot matrix display, digital or graphic highlight display; no viewing angle.\n4) 14 parameters: Ra, Rq, Rz,Rt, Rp, Rv, R3z, R3y, RzJIS, Rs, Rsk, Rku, Rsm, Rmr\n5) Built-in lithium-ion rechargeable battery and control circuit, high capacity, no memory effect.\n6) Reliable circuit and software design of prevent the motor stuck.\n7) Large capacity data storage, can store 100 item of raw data and waveforms.\n8) With automatic sleep, automatic shutdown power-saving features.\n9) All parameters can be printed or print any of the parameters which set by the user.\n10) Resolution： 0.001um， measuring error＜10%， repeatability 6%,17.5mm measuring range.\n11) With measuring software can connected to the computer and printer.\n12) Filter：RC, PC-RC, GAUSS, D-P\n13) Granite Measurement Stand ( Optional) Stand size：300*450*50mm\nZ axis height：400mm Hand wheel range：50mm. Rotation angle：135°\n\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "100 item", "raw data", "high speed", "Stand size", "small size", "light weight", "memory effect", "viewing angle", "high capacity", "Z axis height", "Rotation angle", "mobile measure", "shop floor use", "production site", "software design", "control circuit", "data processing", "automatic sleep", "Reliable circuit", "surface textures", "DSP chip control", "surface roughness", "accuracy stability", "SRT-9000C Surfaces", "measuring software", "measurement results", "low power consumption", "17.5mm measuring range", "400mm Hand wheel range", "Portable Roughness Tester", "Granite Measurement Stand", "small handheld instrument", "graphic highlight display", "ISO international standard", "various national standards", "Large capacity data storage", "lithium-ion rechargeable battery", "128 × 64 OLED dot matrix display", "various machinery-processed parts", "Electromechanical integration design", "automatic shutdown power-saving features" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 36, "imageuri": "https://bizimages.withfloats.com/actual/99c85c0e50a34f63a4bd3d3dee29984d.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/99c85c0e50a34f63a4bd3d3dee29984d.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T10:34:24.47Z", "updatedon": "2024-07-03T11:15:35Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/portable-roughness-tester-srt-9000c/36", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Surface Roughness Tester", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "66851c0b6764471e44754e08", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Portable Roughness Tester 9000S", "description": "SRT-9000S is a high accuracy instrument for measuring surface roughness. It can be used on variety of machining parts and operates on various surfaces, not only flat but also\nouter cone, outer cylinder, curved, pinholes, grooves, recesses grooves and axle etc.\nSRT-9000S allows surface roughness measurement both on metal and non-metal workpieces. It is suitable for machining and manufacturing, quality control, inspection departments, especially for measurement on large and heavy work piece, assembly line on site.\nSRT-9000S roughness parameter is according to various national standards and ANSI B46.1, DIN 4768, JIS B601, ISO 4287 international standard.\n\nFeatures\nOperation promotion：\n1) Composite structure of main display unit, driver unit and Sensor. Electromechanical integration design, small size, light weight, easy to operation.\n2) The stylus drive unit can be stored within the main unit for normal measurement, or separated driver from the display unit by using the supplied cable which allows more flexible measurement in any orientation.\n3) 3.5 inches color graphic TFT touch screen, wide viewing angle, excellent readability and an intuitive rich display, it includes a backlight to improve visibility in dark environments.\n4) It can measure side walls, upwards and other directions, can be equipped with accessories such as height gauge and measuring stands to perform various posture adjustment and positioning measurements of complex work piece.\n\nPerformance improvement：\n1) Large capacity data storage, 100 item of raw data and curves can be stored.\n2) Measuring range：X axis：17.5mm ; Z axis：320um，resolution：0.001um.\n7) Built-in lithium-ion rechargeable battery and control circuit, high capacity, no memory effect, it works over 50 hours while fully charged, and there is remaining charge indicator, charging hint.\n8) Real-time clock setting and display for easy data recording and storage with auto sleep, auto power off, power-saving features.\n9) Reliable circuit and software design, preventing the motor stuck.\n10) Optional : Extending & L type Extending Rod, Curved Surface, Small hole and Deep Groove Sensor.\n11) With standard groove sersor, can meet more than 95% of measurement needs.\n\nFunctional enhancement：\n1) The main interface can display the values of two parameters, or you can convert the values you need to know with one click.\n2) It can expand or reduce the curve display function such as evaluation curve etc.can also display the calculation result evaluation curve, load curve and amplitude distribution curve of each section.\n3) 22 groups of parameters and profile display, support Bluetooth printing and mobile APP wireless operation. USB interface, SD card date store. \n4) The instrument is equipped with data processing software, which can upload the\nmeasurement results to the computer for waveform analysis and printing.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "JIS B60", "ANSI B46", "outer cone", "assembly line", "outer cylinder", "machining parts", "quality control", "metal workpieces", "various surfaces", "heavy work piece", "inspection departments", "high accuracy instrument", "various national standards", "surface roughness measurement", "SRT-9000S roughness parameter", "ISO 4287 international standard", "Portable Roughness Tester 9000S" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 35, "imageuri": "https://bizimages.withfloats.com/actual/a940db88d6be4434904b170fbdbda5b3.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/a940db88d6be4434904b170fbdbda5b3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T09:38:19.89Z", "updatedon": "2024-07-03T11:28:59Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/portable-roughness-tester-9000s/35", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Metrology", "category": "Surface Roughness Tester", "tags": [ "Portable Surface Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 18.0, "isnotforsale": false }, { "_id": "63c7f5df722f5e0001c0af0b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT10G Palmtop graphic roughness tester", "description": "RT10G roughness tester was born from the success obtained by RT10; easy to handle and reliable like the basic version, it also carries out advanced analyses typical of a laboratory instrument.\n\nIn addition to 31 roughness parameters calculated, RT10G displays the graphs of the roughness profile, primary profile, bearing capacity curves, distribution of ordinates, and allows to set tolerances on single parameters and personalize prints. RT10G uses new generation electronics with 0.001 µm resolution that ensure always reliable results and displays them in a user-friendly fashion, thanks to the internal icon menus taken from modern Smartphones.\n\nCHARACTERISTICS:\nMeasurement range: ±300μm\nResolution: 0,001 μm\nCut-off Lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 16 mm\nPick-up: \tInductive, it can be rotated of 90° for lateral measurements (with SB50 probe)\nMeasurement parameters: 31 parameters \n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsm, Rdc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, RPc, PPc – Rk, Rpk, Pvk, Mr1, Mr2 – Pt, R, Rx, AR-R3, R3zm, Rmax)\nGraphs displayed: Roughness, primary, bearing capacity curve, and distribution of ordinates\nUnit of measurement: Millimetres and inches\nInterface: \tTFT, 2’’ colour graphic display and 4 lateral waterproof membrane buttons\nLanguages: Italian, French, English, German, Spanish and Portuguese\nMemory: Up to 1000 measurements\nAccessories: RT10G roughness tester, 110-230V battery charger, adjusting walls, 8 mm diameter end plug for connection to stand, roughness sample, Case, User Manual.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 41, "imageuri": "https://productimages.withfloats.com/actual/63c7ff0cf7454c00013b50b7.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7ff0cf7454c00013b50b7.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-18T13:36:31.508Z", "updatedon": "2024-07-05T10:58:24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt10g-palmtop-graphic-roughness-tester/41", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Surface Roughness", "Roughnesss", "Roughness Tester", "Portable Roughness", "Roughness Parameteres" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ed122ce1902e40001dc4b6e", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Talysurf5_SeSurf Retrofit Package ", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nPre Owned Talysurf 5 – Retrofitted with SeSurf\n•\tFive Traverse Speeds 0.05mm to 2.5mm per sec\n•\t120mm mechanical Datum Traverse for Skid & No Skid\n•\tMotorised Column Stand\n•\tStylus Range: 1000 um\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tFive Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm\n•\tAnalysis of Profile, Unfiltered, Roughness & Waviness\n•\tResolution: 0,01 / 0.001 & 0.0001μm \n•\tSection Remove to delete un wanted data \n•\tHard Coded User Logo, Name, Location etc\n•\tFive fields for entering Job details\n•\tSpecials: Auto Save, Excel Export with Statistical. Parameters & More\n \n \nTalysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. \n\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\n\nSeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.\n\nSeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nTalysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 27, "imageuri": "https://productimages.withfloats.com/actual/5ed122cfebc2290001a5f70c.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ed122cfebc2290001a5f70c.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-05-29T14:57:18.919Z", "updatedon": "2024-07-04T09:34:56Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talysurf5-sesurf-retrofit-package-/27", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [ "Talysurf5", "120mm Traverse", "Roughnesss", "Camber", "Ra", "Rt", "Rz", "Retrofit", "Retrofitted machines", "Retrofit Pakage", "SeSurf Retrofit Package", "On Sale", "Surface Roughness", "Roughness Tester", "Roughness Measurement" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5d735aeff10df1000143eda0", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Talysurf4 SeSurf Retrofit", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nPre Owned Talysurf 4– Retrofitted with Se Surf Ready for Immediate Dispatch.\n\nMain characteristics\n•\tThree traverse Speeds, preferred 0.25mm/ sec.\n•\tCast Iron Column Stand (manual)\n•\tStylus Range: 600 um\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tFive Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm\n•\tAnalysis of Unfiltered, Roughness & Waviness\n•\tOver 20 parameters in Roughness, Waviness & Unfiltered\n•\tResolution: 0,01 / 0.001 & 0.0001μm \n•\tSection Remove to delete un wanted data\n•\tHard Coded User Logo, Name, Location etc.\n•\tColumn mounted Gear Box / Traverse\n•\tFive fields for entering Job details\n•\tSpecials: Auto Save, Excel Export, Stat. Parameters excel export & More\n \n \nTalysurf4 with Se Surf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The4Software is User friendly and Powerful. The Talysurf4 instrument maintains a high level of measurement accuracy and performance reliability, and is available at minimum capital investment. The Cast Iron Base Tee slots are pre aligned to the Pick Up Stylus tip to avoid alignment of the job under test. The Manual Column allows to measure up to 350mm above the surface.\n\nSe Surf provides 14 parameters for Unfiltered Profiles and 24 for Roughness and Waviness parameters. It also enables the user to perform Statistical analysis on measured results.\n\nSe Surf’s Bearing Ratio curve enables the user to asses contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nTalysurf 4 instrument with Se Surf Retrofit Package comes with a 12 month warranty period.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 14, "imageuri": "https://productimages.withfloats.com/actual/5d735aef42fac100019ca7fd.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5d735aef42fac100019ca7fd.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2019-09-07T07:23:27.667Z", "updatedon": "2024-07-03T14:05:43Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talysurf4-sesurf-retrofit/14", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SeSurf", "category": "Surface Roughness Retrofit", "tags": [ "Talysurf4", "Roughness", "Surface Roughness", "Ra", "Waviness" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b383595c4160537731f0f", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Parking Assistance n Management System", "description": "Overview\nPAMS is a computerized system implemented at parking locations to\nAssist drivers entering the building premises by providing them with first hand information about the availability of location wise parking spaces.\nThe software system continuously monitors at external devices the Entry, Exit of the parking . \nThe software handshakes with the external RF reader devices.\nAccepts incoming data, processes it, performs required calculations.\nThe updated parking information is fed to a Led display screen placed at the entrance gate of the building premises.\n\n#### Advantages of PAMS ####\no PAMS is here to furbish real time parking status of all parking locations, thus assisting the driver to the zones quickly.\no Saves Time by eliminating the need to move around in search of a parking slot.\no Saved time can be utilized for productive work.\no Led display is bound to be viewed by several people.\no The Display Screen can also be used as an Advertising tool totally controlled by our system that is when the flow of cars is low or there is no flow of cars at all.\n\no Our systems are generically developed , aids future system upgrades. \no With PAMS the repetitive employing of people to monitor parking spaces is nullified.\no Frequent Training of newly employed staff is long forgotten.\no Repetitive employing of staff to monitor parking spaces will be the past.\no Training them, monitoring them at regular intervals of their performance is cancelled out.\no Funds saved can be used elsewhere where need demands. \n\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "software system", "parking locations", "building premises", "Frequent Training", "regular intervals", "aids future system", "Led display screen", "external RF reader", "software handshakes", "location wise parking", "monitor parking spaces", "first hand information", "Assistance n Management", "updated parking information", "furbish real time parking status" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 7, "imageuri": "https://productimages.withfloats.com/actual/59e9df5a64a7f40bf4191a23.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/59e9df5a64a7f40bf4191a23.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-10-20T11:34:50.29Z", "updatedon": "2023-02-06T13:43:41Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/parking-assistance-n-management-system/7", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Parking Assistance N Management System", "tags": [ "Parking", "Parking Solutions", "Parking management", "Unmanned Parking", "parking lot", "Parking assistance" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b383595c4160537731f72", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Roughness n Waviness Analysis System - SeSurf ", "description": "•\tSeSurf User Interface to Control, Measure and Position \n•\tRaw Profile ( Best Fit Line, Curve, Slope Remove)\n•\tUnfiltered profile Analysis (24 parameters)\n•\tRoughness profile Analysis (24 parameters)\n•\tWaviness profile Analysis (24 parameters)\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tBearing Ratio Curve Parameters\n•\tCrowning (Camber Measurements)\n•\tMulti Data Plot\n•\tSpecials programs for Analysis can also be developed\n\nSeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. \nThe Software is User friendly and Powerful.\nSeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus\ndecreasing Time and improving Productivity\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis.\nTraditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. \nSeSurf incorporates the best industry Standards for data analysis.\nData acquired from the instrument is represented graphically in Raw, Unfiltered, Roughness and Waviness modes.\nRaw data acquired can be analyzed for Slope Removal, Best Fit Line and Best Fit Arc which ever suits the form of the job. \nThere is also a provision for the user to omit areas, unwanted for further analysis.\nUnfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Guassian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\nSeSurf provides 14 parameters for Unfiltered Profiles and 24 for Roughness and Waviness parameters. It also enables the user to perform Statistical analysis on measured results.\nSeSurf’s Bearing Ratio curve enables the user to asses contact/area at a given depth from profile height in percentage to the assessment length. \nParameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nSeSurf Machine Retrofit comes with 12 months free warranty.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Best Fit Arc", "Best Fit Line", "profile height", "profile Analysis", "Machine Retrofit", "industry Standards", "incomplete picture", "Bearing Ratio curve", "laboratory standard", "Unfiltered Profiles", "measurement methods", "Statistical analysis", "accurate acquisition", "surface characterization", "Roughness n Waviness Analysis System" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 3, "imageuri": "https://productimages.withfloats.com/actual/63e0f9f344249700011beb02.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63e0f9f344249700011beb02.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-10-20T10:23:45.778Z", "updatedon": "2024-07-04T09:32:27Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/roughness-n-waviness-analysis-system-sesurf-/3", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [ "Waviness Measurement", "Roughness Parameteres", "Roughness", "Roughness Measurement", "bearing ratio curve", "Roller Camber Measurement", "Roller Camber Analysis program", "Machine control", "data accusition", "Ra", "Rz", "Best Fit Curve", "Best Fit Line", "Slope Removal", "Gaussian Filter", "2CR filter", "Digital filters" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }