Home> Products> place

{ "products": [ { "_id": "6686792aa432c82118617675", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Roundness & Cylindricity Tester RMI-D560C", "description": "Roundness Measuring Instrument RMI-D560C\n\nTechnical specifications:\n\nRotary Table\nBearing Type:- Gas bearing\nRotation accuracy:(0.025+6H/10000)μm\nRotating speed:- 4,6,8,10rpm\nAdjust table: diameter:- 180mm\nTable loading capacity:- 25kg\nRotation diameter:- 560mm\nMax measure diameter:- 280mm\n\nColumn (Z-axis )\n\nColumn transverse travel:- 320mm (electric)\nMax detection depth:- 100mm (min inner diameter) : 30mm)\nColumn straightness:- 0.3μm /100mm\n\nHorizontal arm (X-axis)\nHorizontal movement:- 165mm (electric)\nProtrusion amount:- 25mm\n\nDetector\nAcquisition device:- Circle grating\nCircumference of sampling:- 14400 points\nSensor type:- Inductive Sensor\nSensor range :- ±300μm\nSensor resolution:- 0.001μm\nX raster:- RENISHAW grating scale 0.5um\nZ raster:- RENISHAW grating scale 0.5um\n\n*The above machine specifications can be customized and upgraded according to demand\n\nTechnical features\n1) The machine reference table and Z-axis column material are made of natural granite, the structure is not deformed, and the performance is more stable and reliable.\n2) The rotating spindle adopts a frictionless air-floating spindle, the accuracy is kept longer, and the\nrotation speed is stable\n3) The use of X-direction and Z-direction high-precision grating sensors improves the degree of\nautomation and realizes the measurement function that the sensors can automatically contact.\n4) The key components adopt special stress-relief alloy materials and special stress-relief treatment process, and the durability and accuracy are kept longer.\n\nCylindricity Introduction\nCylindricity measuring instrument is benchmark against precision rotary center and linear motion\nguide,the quantitative evaluation of the cylindricity is made by measuring the radius variation of\nactual contour of several cylindricity surface in different angle position to rotary center by\ndisplacement sensor in the guide. It is used to measure the error of contour shape of cylindricity workpiece (Roundness, cylindricity, planeness, straightness),position error (concentricity, coaxiality, run-out and perpendicularity)\n\nMeasurement Capability:\nEvaluation item: Cylindricity module: Radial full jump, concentricity, taper, radius\nRoundness module: Concentricity, radial single jump, wall thickness difference\nStraightness module: Parallelism, verticality\nSingle section flatness module: Axial single jump, verticality and parallelism\nMulti-section flatness module: parallelism, Axial full jump, verticality\nCommutator module: Single contacts jump, Adjacent contacts jump, intermittent difference of contacts.\n\nReference standard for cylindricity evaluation: LSCY、 MZCY、 MICY、 MCCY、 OSCY\n\nSoftware functions\n1) The software supports Chinese, English, and supports XP, win7, win8, win10 systems\n2) The standard report has various evaluation methods, and the parameters in the test report can be\nadded and deleted as needed.\n3) With commutator module, it can evaluate single-chip true circle, adjacent segment difference and\ngroove segment difference, and the measurement result can be deleted automatically or manually.\n4) Software can assist the rotating spindle to adjust the center and level, improve efficiency and save\ntime\n5) Measurement results can choose ISO statistical report or ISO standard report\n6) Can perform spectrum analysis on contour graphics\n7) Flatness measurement depending on the model can support single-section measurement (D420)\nor 2 to 15 multi-section measurements (D560C)\n8) In multi-section measurement, you can call, delete, and add to each section separately, and you\ncan choose 2 sections at will defined as the reference of the workpiece, performing 2 combined operations not only avoids repeated measurements, but also improves the measurement efficiency.\n9) Cylindricity is calculated by multiple axes, and each axis is corrected by software to minimize the error between the axis systems (D560C)\n10) 3D graphics display, and the graphics can be rotated, beautiful and easy to read. And observe the\noverall contour of the workpiece through relative zoom.\n11) The software is programmable, automatic measurement, and the original measurement data is\nautomatically saved.\n\n\nDevice Configuration\n\nMain Machine\n\nBasic Workbench:- Natural granite\nHigh-precision air float spindle:- \nRotation accuracy\n(0.025+6H/10000)μm\nColumn system:- Natural granite\nHorizontal system:- Steel structure\nPrecision alignment and leveling table 1 Alignment: ±3mm Leveling: ±2°\n\nFor Complete catalog kindly request it from Us", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "X raster", "2 sections", "test report", "Sensor type", "Gas bearing", "14400 points", "3mm Leveling", "axis systems", "Sensor range", "280mm Column", "Adjust table", "relative zoom", "multiple axes", "win10 systems", "contour shape", "25mm Detector", "Column system", "position error", "actual contour", "key components", "Horizontal arm", "Rotating speed", "rotation speed", "0.5um Z raster", "Steel structure", "overall contour", "natural granite", "Evaluation item", "Axial full jump", "Complete catalog", "contour graphics", "Inductive Sensor", "rotating spindle", "Radial full jump", "Rotation accuracy", "Horizontal system", "spectrum analysis", "Sensor resolution", "Protrusion amount", "Commutator module", "table 1 Alignment", "Axial single jump", "Software functions", "Technical features", "measurement result", "Reference standard", "Acquisition device", "min inner diameter", "radial single jump", "displacement sensor", "Horizontal movement", "Column straightness", "Straightness module", "Precision alignment", "Cylindricity module", "ISO standard report", "linear motion guide", "Max detection depth", "measurement function", "Flatness measurement", "Max measure diameter", "Single contacts jump", "2 combined operations", "automatic measurement", "repeated measurements", "measurement efficiency", "cylindricity workpiece", "Measurement Capability", "machine specifications", "Z-axis column material", "25kg Rotation diameter", "Adjacent contacts jump", "ISO statistical report", "quantitative evaluation", "cylindricity evaluation", "intermittent difference", "radius Roundness module", "10) 3D graphics display", "precision rotary center", "machine reference table", "single-chip true circle", "Technical specifications", "Column transverse travel", "different angle position", "Cylindricity Introduction", "original measurement data", "groove segment difference", "wall thickness difference", "Rotary Table Bearing Type", "single-section measurement", "various evaluation methods", "adjacent segment difference", "several cylindricity surface", "Circle grating Circumference", "180mm Table loading capacity", "Multi-section flatness module", "Single section flatness module", "High-precision air float spindle", "frictionless air-floating spindle", "Cylindricity measuring instrument", "2 to 15 multi-section measurements", "special stress-relief alloy materials", "special stress-relief treatment process", "Z-direction high-precision grating sensors", "Device Configuration Main Machine Basic Workbench", "Cylindricity Tester RMI-D560C Roundness Measuring Instrument RMI-D560C" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 53, "imageuri": "https://bizimages.withfloats.com/actual/90a95825107047e5a4e16694249cf44a.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/90a95825107047e5a4e16694249cf44a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-04T10:27:54.338Z", "updatedon": "2024-07-04T10:27:54.338Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/roundness-cylindricity-tester-rmi-d560c/53", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Roundness Tester", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "668556e3091362174c9282af", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Seround Roundness & Cylindricity Machine Retrofit", "description": "SeRound the Software Retrofit is user friendly, powerful and is performance driven. It is developed in-House at Salbro Engineers and has under gone years of field tests. It provides a through interactive user interface between the user and the Instrument. All Integrated to make one precise instrument to detect and assess the following results in Roundness, Concentricity, Eccentricity, Flatness (rotating 3D profile display), Cylindricity, Straightness, Parallelism, Squareness, Coaxiality and Radial Run-out, Axial Run-Out, Harmonics.\n\nSeRound is proficient in Data acquisition, profile filtering, and assessment of the roundness parameters and graphical presentation of the results. It also performs instrument control. SeRound’s Setup and Measure window assists the user in accurately centering and leveling the job thus saving on time and improving productivity. The measuring process is initiated by the user by a mere click of a button and displaces measure completed’ massage at the end of measuring sequence. SeRound offers options to choose the method of calculation and assessment. Roundness and Flatness assessments are carried out on 4 internationally recognized reference circles (LSC, MIC, MCC and MZC). Option to the User is able to omit unwanted data and carry out analysis with remaining data. Measured data can be saved, retrieved and re-analyzed to any of the available conditions as desired by the user.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "mere click", "field tests", "Measured data", "unwanted data", "Measure window", "remaining data", "Data acquisition", "Salbro Engineers", "Seround Roundness", "following results", "measuring process", "Software Retrofit", "profile filtering", "measuring sequence", "instrument control", "Flatness assessments", "roundness parameters", "available conditions", "graphical presentation", "one precise instrument", "interactive user interface", "rotating 3D profile display", "Cylindricity Machine Retrofit", "4 internationally recognized reference circles" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 52, "imageuri": "https://productimages.withfloats.com/actual/5f465947f6626000016855ab.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f465947f6626000016855ab.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:49:23.269Z", "updatedon": "2024-07-03T13:52:48Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/seround-roundness-cylindricity-machine-retrofit/52", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [ "Roundness", "Flatness", "Cylindricity", "Axial Runout", "Radial Runout", "Relative Eccentricity", "Cylindricity With Roundness", "Multi Profile Plot", "Straightness", "parallelism", "harmonics", "Wave Amplitude Control" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685515b7697320a5c5e00a6", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Profilometer PGS 200 Contour Measuring Instrument", "description": "The new profilometer PGS 200 combines the need to have a highly versatile tool, which ensures ease of installation in production environments, however, that in measuring rooms to ensure the accuracy of the measures to be always certain of the results obtained. With the concept \"all at once\" the PGS 200 with a few clicks is now operating through the Profile Studio analysis software in a short time the operator is able to measure even the most complex\n\nKey Features\n• Structure \"all in one\", no external electronics.\n• Treated alloy base that combines high rigidity and light weight.\n• Measuring range Y- 50 mm, X- 220mm\n• Measurement speed: 0.5, 1, 2 mm / sec\n• Angle measurement: up 70 °, 85 ° down.\n• CNC column position 320 mm. Ability to run automatic cycles, not in manual column\n• Autocomparazione of measurements.\n• © Windows software with aid to the operator through the Wizard to the most complex operations\n• Advanced CAD functions (tolerances, errors of form)\n\nThe new PGS 200 profilometer is a project where the goal was to create a system for the characterization of surfaces by extreme flexibility. Following this philosophy has created a machine that, thanks to the considerable size and weight reduction (inside the machine weighs just over 40 kg) allows easy installation in any environment, which may be metrology laboratory or production line.\n\nThe acquisition system is based on a 200 PGS traverse movement, through which the polar probe is kept in contact with the work piece. The system is combined with two Nano sensors guarantees result with in a working area of 50mm x 220 mm while maintaining a high level of accuracy.\n\nThe base is made of light alloy; this combination provides a significant reduction in weight while maintaining a high resistance to scratching and wear. The column positioning allows you to move the Traverse up to a height of 380mm above base.\n\nUsing the positioner mounted on the base of the instrument, the loading and unloading of the pieces are greatly simplified since the positioner can be moved along a special guide allowing you to load the piece off from work and then bringing it close with precision. With the software Profile Studio study, all the functions necessary for the characterization of the profile are easily accessible thanks to the tool bar right where every family to a different color (lines, arcs, points), this makes each function easily recognizable and accessible with a single clicks.\n\nIn the tool bar on the left of the group is represented in the measured profiles so you can easily switch from an atrium or, if desired, assist them in a multi-screen. Same bar, also consists the major functions for instrument control including the position of the axes and buttons for starting measurement and calibration position. With this interface the operator with a glance full control of the application.\n\nFor more complex procedures used is the philosophy of the Wizard or the operator is guided step by step through each elementary operations,\ngreatly simplifying the entire procedure. This type of assistance is used for example for calibration and the search for points of maximum\nand minimum during the placement of a piece.\n\nThe CAD program is the basis of highly advanced, all entities are dynamic and therefore editable after insertion. With the functions \"Best Fit\" the operator with a single click you can place a arc or a line on the profile because the program will automatically recognize the area to the\nminimum error in which include this element. Through the program you can control every movement of the tool by setting the measurement parameters for each of the measures for automated* repeated measurements, you can also set facilitating the movement of the limits in this way, the positioning during difficult measures such as inside holes and groves.\n\nThrough the \"Autocomparazione\" the program automatically rebuilds, measured on a new profile, construction and dimensional tolerances of these making a reference profile, so high speed control pieces of the same lot.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2 mm", "40 kg", "tool bar", "same lot", "Best Fit", "Same bar", "X- 220mm", "work piece", "short time", "high level", "CAD program", "polar probe", "light alloy", "new profile", "working area", "light weight", "single click", "Key Features", "minimum error", "special guide", "manual column", "high rigidity", "50mm x 220 mm", "versatile tool", "production line", "major functions", "different color", "high resistance", "Measuring range", "measuring rooms", "weight reduction", "entire procedure", "automatic cycles", "easy installation", "Angle measurement", "considerable size", "reference profile", "Measurement speed", "difficult measures", "acquisition system", "column positioning", "complex procedures", "complex operations", "© Windows software", "instrument control", "Treated alloy base", "extreme flexibility", "CNC column position", "glance full control", "calibration position", "metrology laboratory", "external electronics", "new profilometer PGS", "repeated measurements", "elementary operations", "significant reduction", "dimensional tolerances", "measurement parameters", "Advanced CAD functions", "production environments", "new PGS 200 profilometer", "200 PGS traverse movement", "high speed control pieces", "two Nano sensors guarantees", "software Profile Studio study", "Profile Studio analysis software", "Profilometer PGS 200 Contour Measuring Instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 38, "imageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:25:47.401Z", "updatedon": "2024-07-03T13:30:00Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/profilometer-pgs-200-contour-measuring-instrument/38", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "contour", "Contour Measurement", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6446742e82c0230001a5d489", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "TALYROND 252 Roundness Tester Retrofit", "description": "Note*-Machines displayed are Products/property of respective Manufactures. Machine Pictures used are to state compatibility of our Retrofit Package only.\n\nSeRound the Software Retrofit is user friendly, powerful and is performance driven. It is developed in-House at Salbro Engineers and has under gone years of field tests. It provides a through interactive user interface between the user and the Instrument. All Integrated to make one precise instrument to detect and assess the following results in Roundness, Concentricity, Eccentricity, Flatness (rotating 3D profile display), Cylindricity, Straightness, Parallelism, Squareness, Coaxiality and Radial Run-out, Axial Out, Harmonics.\n\nSeRound is proficient in Data acquisition, profile filtering, and assessment of the roundness parameters and graphical presentation of the results. It also performs instrument control. SeRound’s Setup and Measure window assists the user in accurately centering and leveling the job thus saving on time and improving productivity. The measuring process is initiated by the user by a mere click of a button and displaces measure completed’ massage at the end of measuring sequence. SeRound offers options to choose the method of calculation and assessment. Roundness and Flatness assessments are carried out on 4 internationally recognized reference circles (LSC, MIC, MCC and MZC). MZ Cylinder for Cylindricity analysis, LSL and MZ Lines for Straightness analysis., Operator is able to omit unwanted data and carry out analysis with remaining data. Measured data can be saved, retrieved and re-analyzed to any of the available conditions as desired by the user.\n\nA. MESUREMENT CAPACITY\n\n1. Maximum diameter : 350 mm (13.8 in) optionally(also see Para 9) \nextendable to 500 mm (19.7 in)2. Maximum Weight : 20 kg (44.1 lb)3. Maximum Height of assessable Surface : 300mm (11.8 in)4. Worktable Moment Loading : 120 kgmm (10.4 lbin)5. Maximum Eccentricity : 25mm (0.98in) along the load line\n\nB. WORKTABLE AND SPINDLE\n1. Worktable Diameter :190mm (7.5 in)2. Speed of Rotation : 6 rpm nominal, clockwise3. Range of Centering Nominal : ±1mm (±0.04in)4. Range of Leveling Nominal : ±4.1 mrad (±14 arc minutes)5. Height of neutral plane above Worktable : 20mm (0.79in)6. Roundness Limit of Error : Concentric Load 20kg (44.1 lb)(Departure from the least within 0.06 µm 0.0003µm/mmSquares circle at 6 rpm with height above worktable 0-50 u.p.r filter) (1.5 µin 0.3 µin/in)*7. Axial Error : 0.15µm (3.9 µin) maximum axial movement of worktable during one revolution.\n*These departures may be inwards and outwards\n\nC. VERTICAL STRAIGHTNESS UNIT\n1. Measurement Length : 300 mm (11.8in),2. Accuracy of stop Measurement : 0.5mm (0.02in)3. Speed of Traverse (for set-up) : (1) Joystick slow speed0-3mm/s (0-0.12 in/s) for approx 70% of joystick travel. (2) Computer controlled <3 mm/sec variable.4. Straightness limit of Error : In the measuring plane: (Minimum zone straightness at 1µm over 300 mm (40µin 1mm/sec (0.04 in/sec) with over 11.8in) 8.0mm (0.3in) cut off low pass filter5. Positional Control Uncertainty : ±100µm (±0.004in) for one single move.6. Internal Capacity : 150mm (5.9in) For Straightness Limiting conditions, Maximum length of continuous Minimum diameter clearance Internal surface that can be assessed 115mm (4.5in) depth in bores larger thanØ25mm (Ø1in)7. For Roundness assessment Internal bore penetration : 150mm (5.9in), 115mm depth in bore of Ø25mm\n***Internal penetration for other than ‘limiting condition’ depends on component geometry.\n\nD. RADIAL STRAIGHTNESS UNIT1. Traverse Length : 200mm (7.9in) This may be set for up to 50mm (1.97in) of travel past the spindle axis. Standard setting is 25mm past the spindle axis.2. Speed of Traverse : up to 2mm/sec3. Positional control uncertainty : ±50µm (±0.002in) for one single move.This is for both relative and absolute movements.\n\nE. GAUGE1. Standard Stylus Arm Length : 75mm (2.95”) effective length2. Range of Gauge movement with80mm Stylus Arm : 1.2mm (0.079in) Nominal F. ELECTRICAL SUPPLY\n\nMain Instrument Overall Weight : 279kg (615lbs)\nOverall Length : 760mm (29.9in)\nOverall Width : 760mm (29.9in)\nOverall Height : 1513mm (59.6in)\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "LSL", "MCC", "MIC", "LSC", "job", "end", "MZC", "time", "Note", "Setup", "years", "House", "button", "method", "options", "SeRound", "Machines", "Products", "property", "MZ Lines", "Harmonics", "Squareness", "Coaxiality", "mere click", "Radial Run", "MZ Cylinder", "calculation", "field tests", "Parallelism", "performance", "productivity", "Eccentricity", "compatibility", "Concentricity", "Measured data", "unwanted data", "remaining data", "Measure window", "Retrofit Package", "Data acquisition", "Machine Pictures", "Salbro Engineers", "following results", "measuring process", "profile filtering", "Software Retrofit", "measuring sequence", "instrument control", "Flatness assessments", "roundness parameters", "available conditions", "Cylindricity analysis", "Straightness analysis", "graphical presentation", "one precise instrument", "respective Manufactures", "interactive user interface", "rotating 3D profile display", "TALYROND 252 Roundness Tester Retrofit", "4 internationally recognized reference circles" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 44, "imageuri": "https://productimages.withfloats.com/actual/644674336e06d800016fc260.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/644674336e06d800016fc260.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-04-24T12:21:02.447Z", "updatedon": "2024-07-03T13:28:44Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talyrond-252-roundness-tester-retrofit/44", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Roundness Tester Retrofit", "tags": [ "Roundness Teste Retrofit Package", "Laboratary Roundness Tester", "Upgraded Software", "roundness", "Straightness", "Cylindricity", "Parallelism", "Flatness", "Relative Eccentricity", "eccentricity", "squareness", "Velocity Analysis", "Harmonics", "Axial Runout", "Radial Runout" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210cd7d42cde700018b45d3", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PGS100 Profilometer", "description": "The PGS100 profilometer allows to acquire 2D profiles in an extremely simple and intuitive way, thanks also to its measuring range of 130 mm in length (X) and 50 mm in height (Z).\n\nThe use of the tool takes place through the commands given by the software or from the PC keyboard in a very intuitive way.\n\nThe Profile Studio analysis program is equipped with all the CAD functions necessary for the dimensioning of your pieces, it also allows you to create programs to automate the characterization of the elements, for example during series measurements.\n\nThe standard configuration that includes the worktable with \"T\" slot and the 32 mm chisel measuring probe, can be enriched and completed with various accessories, including the positioner with 3 or 4 degrees of freedom on bearings and the precision vice that allows you to firmly clamp the pieces during measurements.\n\nThe calibration, thanks to the dedicated calibration sample, takes place guided by the software.\n\nCHARACTERISTICS:\nUnit of measure: \tMillimetres and inches\nExploration stroke (X): \t130 mm (5,12 in)\nMeasuring range (Z): \t50 mm (1,97 in)\nColumn travel (Y) \t320 mm (12,6 in) manual\nSampling interval (X): \t0,5 μm (0,02 μin)\nZ axis resolution: \t0,2 μm (0,008 μin)\nPositioning speeds: \t0-10 mm/s (0-7 in/s)\nMeasurement speed: 0.2 mm/s to 2 mm/s (from 0.008 in/s to 0.08 in/s)\nTip radius: \t20 μm (0,8 μin)\nCNC cycles: Automatic CNC measuring and positioning cycles with auto-comparion\nConnection: USB interface to Windows© PC\nLanguages: English, French, German, Italian, Spanish, Portuguese and Slovenian\nDimensions (L x D x H): \t1030 x 410 x 660 mm (41 x 16 x 26 in)\nTotal weight: 34 kg (75 lbs)\nSupply voltages: 110-240 V ; 50-60 Hz\nWorking temperatures: 15 - 25°C (59 - 77°F)\nSoftware: \tProfile Studio Basic\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and machine accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "use", "tool", "place", "50 mm", "length", "pieces", "height", "simple", "130 mm", "example", "T\" slot", "freedom", "elements", "programs", "software", "commands", "bearings", "4 degrees", "worktable", "positioner", "PC keyboard", "2D profiles", "dimensioning", "CAD functions", "intuitive way", "precision vice", "measuring range", "characterization", "series measurements", "various accessories", "standard configuration", "The PGS100 profilometer", "32 mm chisel measuring probe", "dedicated calibration sample", "The Profile Studio analysis program" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 33, "imageuri": "https://productimages.withfloats.com/actual/63c7b8fb7a4ce700014e0b1a.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7b8fb7a4ce700014e0b1a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:59:09.691Z", "updatedon": "2024-07-05T11:01:17Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//pgs100-profilometer/33", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Contour Profilometer", "tags": [ "Profilometers", "Contour", "Contour Measurement", "Form Measurement", "CAD functions", "Automatic CNC positioning", "Automatic CNC measuring" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ec533161a94f90001258e05", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Profilometer PGS 200", "description": "PGS200 profilometer is an instrument of new generation, able with a few simple operations, to characterise the profile of also complex pieces, thanks to the modern “all in one” logic: with just a few operations, it is immediately ready and calibrated to take measurements. Profile Studio software installed on PGS200 was conceived to be extremely user-friendly and easy to use by the operator.\n\nThe functions required for the characterization of the profile are grouped into categories (points, line, arcs, sizes), each of different colour to be easily identified. The CAD is highly advanced: all items are dynamic and can be edited after being input.\n\nFor more complex pieces, PGS 200 allows to execute measurement cycles and therefore, obstacles are automatically overcome (grooves, shouldered parts), and the profile is reconstructed at the end of the measurement. Thanks to the motorized column, calibration takes place automatically like the measuring cycles, thus ensuring a remarkable saving of time and high flexibility.\n\nCHARACTERISTICS:\nMeasurement range in X: \t220 mm (8.66 in)\nMeasurement range in Z: 50 mm (1.97 in)\nResolution on the X axis: 0.5 μm (0.02 μin)\nResolution on the Z axis: 0.1 μm (0.008 μin)\nPositioning speed: 0 – 10 mm/s (0 – 0.4 in/s)\nMeasurement speed: 0.2 - 0.5 – 1 – 2 mm/s (0.008 - 0.02 – 0.04 – 0.08 in/s)\nTraverse length of column: Column with a positioning of 320 mm (12.6 in)  or 520 mm (20.5 in) manual or motorized CNC\nMeasurement tip: Tip radius 20 μm (0.8 μin) and front roundness\nCNC cycles: CNC automatic measurement and positioning cycles with self-comparison\nConnection: \tUSB interface towards Windows© PC\nLanguages: \tItalian, French, English, German, Spanish, Portuguese and Slovenian\nSizes LxDxH: 1100 x 570 x 720 mm (43.3 x 22.4 x 28.3 in)\nOverall weight: 42 kg(92 lbs)\nSoftware: Profile Studio\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 25, "imageuri": "https://productimages.withfloats.com/actual/63c7c61e1a09760001dbae63.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c61e1a09760001dbae63.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-05-20T13:39:34.352Z", "updatedon": "2024-07-03T14:00:58Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/profilometer-pgs-200/25", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Contour / Profilometer", "tags": [ "Contour", "CAD program" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b383595c4160537731f0f", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Parking Assistance n Management System", "description": "Overview\nPAMS is a computerized system implemented at parking locations to\nAssist drivers entering the building premises by providing them with first hand information about the availability of location wise parking spaces.\nThe software system continuously monitors at external devices the Entry, Exit of the parking . \nThe software handshakes with the external RF reader devices.\nAccepts incoming data, processes it, performs required calculations.\nThe updated parking information is fed to a Led display screen placed at the entrance gate of the building premises.\n\n#### Advantages of PAMS ####\no PAMS is here to furbish real time parking status of all parking locations, thus assisting the driver to the zones quickly.\no Saves Time by eliminating the need to move around in search of a parking slot.\no Saved time can be utilized for productive work.\no Led display is bound to be viewed by several people.\no The Display Screen can also be used as an Advertising tool totally controlled by our system that is when the flow of cars is low or there is no flow of cars at all.\n\no Our systems are generically developed , aids future system upgrades. \no With PAMS the repetitive employing of people to monitor parking spaces is nullified.\no Frequent Training of newly employed staff is long forgotten.\no Repetitive employing of staff to monitor parking spaces will be the past.\no Training them, monitoring them at regular intervals of their performance is cancelled out.\no Funds saved can be used elsewhere where need demands. \n\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "software system", "parking locations", "building premises", "Frequent Training", "regular intervals", "aids future system", "Led display screen", "external RF reader", "software handshakes", "location wise parking", "monitor parking spaces", "first hand information", "Assistance n Management", "updated parking information", "furbish real time parking status" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 7, "imageuri": "https://productimages.withfloats.com/actual/59e9df5a64a7f40bf4191a23.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/59e9df5a64a7f40bf4191a23.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-10-20T11:34:50.29Z", "updatedon": "2023-02-06T13:43:41Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//parking-assistance-n-management-system/7", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Parking Assistance N Management System", "tags": [ "Parking", "Parking Solutions", "Parking management", "Unmanned Parking", "parking lot", "Parking assistance" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b383595c4160537732059", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Seround Software Roundness & Cylindricity ", "description": "SeRound the Software Retrofit is user friendly, powerful and is performance driven. It is developed in-House at Salbro Engineers and has under gone years of field tests. It provides a through interactive user interface between the user and the Instrument. All Integrated to make one precise instrument to detect and assess the following results in Roundness, Concentricity, Eccentricity, Flatness (rotating 3D profile display), Cylindricity, Straightness, Parallelism, Squareness, Coaxiality and Radial Run-out, Axial Out, Harmonics.\n\nSeRound is proficient in Data acquisition, profile filtering, and assessment of the roundness parameters and graphical presentation of the results. It also performs instrument control. SeRound’s Setup and Measure window assists the user in accurately centering and leveling the job thus saving on time and improving productivity. The measuring process is initiated by the user by a mere click of a button and displaces measure completed’ massage at the end of measuring sequence. SeRound offers options to choose the method of calculation and assessment. Roundness and Flatness assessments are carried out on 4 internationally recognized reference circles (LSC, MIC, MCC and MZC). Option to the User is able to omit unwanted data and carry out analysis with remaining data. Measured data can be saved, retrieved and re-analyzed to any of the available conditions as desired by the user.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Integrated", "calculation", "performance", "Measured data", "Software Retrofit", "reference circles", "displaces measure", "precise instrument", "Cylindricity Machine", "Flatness assessments", "roundness parameters", "available conditions", "Measure window assists", "graphical presentation", "interactive user interface" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 4, "imageuri": "https://productimages.withfloats.com/actual/59e9d162c99fbf08f0388fae.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/59e9d162c99fbf08f0388fae.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-10-20T10:35:15.041Z", "updatedon": "2024-07-03T14:03:37Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/seround-software-roundness-cylindricity-/4", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [ "Roundness", "Cylindricity", "Harmonics", "Relative Eccentricity", "Flatnesss", "Straightness", "Parallelism", "Radial Runout", "Axial Runout", "Parallelism", "Waviness Measurement", "Waviness Analysis", "Velocity Analysis", "LSC", "MIC", "MCC", "MZC", "Flatness", "Relative Eccentricity", "Digital filters", "Gaussian Filter", "2CR filter", "FFT algorithum", "Straightness", "Linear Graph", "squareness", "Concentricity", "spherocity", "Cylindricity with Roundness" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685572d4409440d98840461", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Camber assessment Program", "description": "Assessment of Roller profile depth against specified axial length. This is an important parameter for Rollers & Rings in Bearings. This Parameter also gives contact area against load caring capacity. ", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "contact area", "axial length", "important parameter", "load caring capacity", "Roller profile depth", "Camber assessment Program" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 54, "imageuri": "https://productimages.withfloats.com/actual/5f7b1528db5c79000197f49e.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1528db5c79000197f49e.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:50:37.565Z", "updatedon": "2024-07-03T13:51:54Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/camber-assessment-program/54", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SeSurf Salbro Engineers", "category": "Special Prgs Surface Metrology", "tags": [ "Rollers", "Rings", "camber", "Height", "Surface Metrology" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }