Home> Products> roughness measuring machines

{ "products": [ { "_id": "63c7f5df722f5e0001c0af0b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT10G Palmtop graphic roughness tester", "description": "RT10G roughness tester was born from the success obtained by RT10; easy to handle and reliable like the basic version, it also carries out advanced analyses typical of a laboratory instrument.\n\nIn addition to 31 roughness parameters calculated, RT10G displays the graphs of the roughness profile, primary profile, bearing capacity curves, distribution of ordinates, and allows to set tolerances on single parameters and personalize prints. RT10G uses new generation electronics with 0.001 µm resolution that ensure always reliable results and displays them in a user-friendly fashion, thanks to the internal icon menus taken from modern Smartphones.\n\nCHARACTERISTICS:\nMeasurement range: ±300μm\nResolution: 0,001 μm\nCut-off Lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 16 mm\nPick-up: \tInductive, it can be rotated of 90° for lateral measurements (with SB50 probe)\nMeasurement parameters: 31 parameters \n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsm, Rdc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, RPc, PPc – Rk, Rpk, Pvk, Mr1, Mr2 – Pt, R, Rx, AR-R3, R3zm, Rmax)\nGraphs displayed: Roughness, primary, bearing capacity curve, and distribution of ordinates\nUnit of measurement: Millimetres and inches\nInterface: \tTFT, 2’’ colour graphic display and 4 lateral waterproof membrane buttons\nLanguages: Italian, French, English, German, Spanish and Portuguese\nMemory: Up to 1000 measurements\nAccessories: RT10G roughness tester, 110-230V battery charger, adjusting walls, 8 mm diameter end plug for connection to stand, roughness sample, Case, User Manual.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 41, "imageuri": "https://productimages.withfloats.com/actual/63c7ff0cf7454c00013b50b7.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7ff0cf7454c00013b50b7.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-18T13:36:31.508Z", "updatedon": "2024-07-05T10:58:24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt10g-palmtop-graphic-roughness-tester/41", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Surface Roughness", "Roughnesss", "Roughness Tester", "Portable Roughness", "Roughness Parameteres" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "63c7e7b55626f700012bf788", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RTP80 Portable roughness tester", "description": "RTP80 roughness tester, easy to handle and user-friendly, allows to characterize even the most complex surfaces, easily and conveniently. The shiny 5.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances can be printed immediately using the thermal printer built in the instrument. The graphs and parameters are all of interactive type, to allow the operator to choose how to present the results. RTP80 is suitable for production departments, where the measurement settings for batch analyses can be protected by password, and it is also ideal to be used in metrological laboratories where statistical analyses can be carried out on the measurements taken. RTP80 calculation unit can be connected up to 4 measurement translators for various types of pieces.\n\nCHARACTERISTICS:\nMeasurement range: ±500μm ( TL90 )\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 - 8 mm\nCut-off number: Selectable from 1 to 19\nTraverse lenght: Up to 50 mm ( TL90 )\nPick-up: Inductive, it can be rotated of 90° for lateral measurements\nPrinter: Integrated, thermal printer\nMeasurement parameters:54 parameters\n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsk, Rku, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, Pdc, PPc, R, Rx, AR, Wte, W, AW, Wx, Rke, Rpke, Rvke, Mr1e, Mr2e Rmax, R3z, R3zm)\n\nGraphs displayed: Roughness, waviness, primary, bearing capacity curve, and distribution of Ordinates.\nUnit of measurement: Millimeters and inches\nInterface: TFT, 5.7'' colour graphic Touchscreen display and 3 waterproof membrane buttons\nLanguages: Italian, French, English, German, Spanish, Portuguese\nMemory: Up to 1000 measures\nAccessories: RTP80 roughness tester, Translator (TS4, TS7, TL90, Rotarix 55 or Rotarix 125), 110-230V battery charger, roughness sample, case, user manual\n\nCONNECTABLE TRANSLATORS:\n\nTS7\nCompact and easy to handle translator, it allows taking measurements in the most difficult conditions, by simply holding it in one hand. Maximum traverse length of 25 mm\n\nTL90\nProfessional translator with internal metrological reference that allows characterizing W waviness parameters\n\nPositioning micrometrics on the piece, with traverse length of 110 mm, bistable nib for measurements with and without skid. Maximum traverse length of 50 mm.\n\nROTARIX 55\nRotary unit with horizontal axis for measuring radial roughness (e.g. pipes, balls) on medium-size pieces, measurement diameter from Ø3 ÷ Ø60 mm.\n\nROTARIX 125\nRotary unit with vertical axis for measuring radial roughness on bulky pieces, measurement diameter from Ø10 ÷ Ø160 mm.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "radial roughness", "measurement settings", "3 waterproof membrane", "RTP80 roughness tester", "measurement parameters", "RTP80 calculation unit", "production departments", "Maximum traverse length", "4 measurement translators", "metrological laboratories", "colour touchscreen display", "surface metrology products", "RTP80 Portable roughness tester", "internal metrological reference", "colour graphic Touchscreen display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/63c7e7b759521a0001845857.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7e7b759521a0001845857.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-18T12:36:05.279Z", "updatedon": "2024-07-05T10:57:57Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//rtp80-portable-roughness-tester/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Roughness", "Roughness Measurement", "Surface Roughness", "Surface Finish", "Ra", "Roughness Mean" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "6210ca3f6cf79500017ec1d7", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "WARPsurf ", "description": "The WARPsurf is a turning point in the world panorama of the instruments for surface analysis, because it gives in a single portable instrument the capability to perform both roughness and profilometry analysis.\n\nThe brilliant 7’’ touch screen display, combined with modern user interface, allows the user to become quickly familiar with the instrument, setting easily the measure parameters, positioning on the piece and performing the analysis.\n\nThe instrument is equipped with a 1GHz microprocessor that allows to have a fluid system and fast processing even with complex profiles.\n\nExtremely compact and handy, the WARPsurf allows to position easily on big pieces thanks to the integrated micrometric that covers 110 mm range.\n\nThanks to the standard USB interface, it is possible to plug a regular USB drive to save images or PDF reports; using this interface the instrument can connect to a common desktop printer and directly print on A4.\n\nThe instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.\n\nFEATURES:\nMeasurement range : ±1500μm\nResolution : 0,0001 µm - (0,1nm)\nCut-off lenght : 0,08 - 0,25 - 0,8 - 2,5 - 8 mm\nCut-off number : Selectable from 1 to 20 (1 to 6 for 8 mm cut-off)\nTraverse lenght : Up to 60 mm\nPick up \tInductive, it can be rotated of 90' for lateral measurements and interchangeable styluses\n\nMeasurement parameters \t81 roughness parameters\nRa, Rq, Rt, Rz, Rp, Rv, Rc, Rsk, Rku, RSm, RΔq, RΔa, Rmax, Rδc, Rmr, Rmr(c), RPc, RLo, Rlr, Rzjis, RHSC, R3z, hp, Ep\nPa, Pq, Pt, Pq, Pv, Pc, Psk, Pku, PSm, PΔq, Pδc, PPc, PLo, Plr, PHSC\nWa, Wq, Wt, Wz, Wp, Wv, Wc, Wsk, Wku, WSm, WΔq, Wδc, WPc, WLo, Wlr, WHSC\nRk, Rpk, Rvk, Mr1, Mr2, A1, A2, Rpk*, Rvk*, WDSm, WDc, WDt\nR, AR, Rx, W, Aw, Wx, Wte, Rke, Rpke, Rvke, Mr1e, Mr2e, A1e, A2e\n\nAvailable charts: Roughness, Waviness, Dominant waviness, Primary, Material ratio curve (bearing) and height amplitude distribution (density).\nUnit of measurement : Millimeters and inches\nUser interface : Color display touchscreen TFT, 7 inches, 3 impermeable membrane switches\nLanguages: Italian, French, Inglese, German, Spanish, Portuguese, Japanese, Chinese, Korean\nMemory \tUp to 4000 measurements for roughness – Up to 1000 for profilometry\nCAD : Functions to process the integrated profile,\nPoints: carthesian – on the profile – intersection – limit – maximum - minimum\nLines: best-fit – polar – interrupted - between two or more points – parallel\nArcs: best-fit – interrupted - between three or more points – center and radius – tangent\nDimensions: Aligned – Vertical – Horizontal – Radius – Angle – Line-point distance\nAdvanced: Axis alignment – Z magnification\nVisualization: Pan – Zoom\nPrinting : 1- Capability to print on a common USB desktop printer in A4 format (Example: HP deskjet)\n2- Capability to print to PDF on a USB drive\n3- Printing on a PR11 device using Bluetooth connection\nEquipment : WARPsurf roughness tester with SB300 magnetic probe and stylus 1-Y roughness, battery charger 110-230V, roughness specimen, plastic case, user manual\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "A4.", "images", "capability", "big pieces", "instruments", "PDF reports", "110 mm range", "fluid system", "The WARPsurf", "turning point", "world panorama", "fast processing", "surface features", "surface analysis", "complex profiles", "dimensional ones", "regular USB drive", "measure parameters", "1GHz microprocessor", "WARPsurf SM Product", "profilometry analysis", "modern user interface", "standard USB interface", "integrated micrometric", "common desktop printer", "interchangeable styluses", "Portable Roughness Tester", "single portable instrument", "brilliant 7’’ touch screen display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/63c7bea07a4ce700014e0efa.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7bea07a4ce700014e0efa.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:45:19.62Z", "updatedon": "2024-07-05T10:55:55Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/warpsurf-/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "surface analysis", "WARPsurf", "roughness parameters", "Roughness", "Waviness", "Dominant waviness", "Material ratio curve (bearing)", "height amplitude distribution", "Ra", "Surface Roughness", "Surface Metrology", "Roughness Tester", "roughness average", "Roughness" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "5ea9a9c7f9dcce0001a0a27c", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT10 Palmtop Roughness Tester", "description": "RT10 roughness tester is the basic tester of the range. This instrument is ideal to measure pieces directly on work stations or production machinery. Thanks to its simplicity of use, it is ideal for the simple numeric characterization of the roughness of an object and boasts quick testing times. Thanks to the internal memory, simple handling and integrated battery, RT10 is ideal for taking measurements in difficult conditions, like in case of bulky or complex pieces.\n\nCHARACTERISTICS::\nMeasurement range: ±200μm\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 16 mm\nPick-up: \tInductive, it can be rotated of 90° for lateral measurements (with SB50 probe)\nMeasurement parameters: 11 parameters \n(Ra, Rq, Rt, Rz, Rc, RSm, Rmr, Rmax, RPc, Pt, R, AR, Rx)\nUnit of measurement: Millimetres and inches\nInterface: \tLCD, 132x32 monochromatic graphic display and 4 waterproof membrane buttons\nLanguages: \tItalian, French, English, German, Spanish, Portuguese\nMemory: \tUp to 1000 measurements\nAccessories: RT10 roughness tester, 1\n 10-230V battery charger, adjusting walls, \n 8 mm diameter end plug for connection to stand, \n roughness sample, Case, User Manual\n\nRT10 Plus (code 1.101). RT10 roughness tester is also available in the Plus version which features a plug-in connector that allows to interchange the pick-up, thus being able to take measurements on all types of surfaces, by simply mounting the most suitable pick-up.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 22, "imageuri": "https://productimages.withfloats.com/actual/63c6713ef959db00013f5ab3.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c6713ef959db00013f5ab3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-04-29T16:22:31.915Z", "updatedon": "2024-07-03T14:00:21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt10-palmtop-roughness-tester/22", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Surface Roughness", "Portable", "Roughnesss", "Ra", "Rz", "Rt", "Roughness Tester", "Roughness Measurement" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "66855670c0e30a1804aed58b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roundness n Cylindricity Measuring Machines", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nRetrofit your existing Roundness and Cylindricity Instruments with SeRound an Inhouse developed Retrofit package comprising of Electronics and Software to suit machines for various manufactures. \n\n•\tSeRound the Software Retrofit for Talyrond252 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to analyze / detect the following \n•\tParameters: Roundness,Concentricity,Relative Ecentricity, Flatness. Squareness, Coaxiality, Cylindricity, Axial Runout, Radial Runout, Face Parallelism,Straightness,Parallelism\n\nData acquisition, profile filtering, evaluation of the roundness and other parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) Arm and Column movement (Incremental / Absolute), Gauge Position and orientation has been realized by SeRound. \n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. \n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nTalyrond 252 with SeRound Analysis software Retrofit comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "Axial Runout", "Radial Runout", "Measure window", "default cycles", "Gauge Position", "same parameters", "table centering", "Column movement", "amplifier range", "measuring speed", "Data acquisition", "Face Parallelism", "other parameters", "graphical output", "Salbro Engineers", "Machine Pictures", "profile filtering", "Retrofit Packages", "existing Roundness", "instrument control", "Relative Ecentricity", "various manufactures", "PC Retrofit Roundness", "one precise instrument", "respective Manufactures", "Cylindricity Instruments", "many similar work pieces", "12 months warranty period", "Electronic Interface unit", "interactive user interface", "Cylindricity Measuring Machines", "SeRound Analysis software Retrofit" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:28.094Z", "updatedon": "2024-07-03T13:53:21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pc-retrofit-roundness-n-cylindricity-measuring-machines/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [ "Roundness", "Flatness", "Cylindricity", "Radial Runout", "Axial Runout", "Straightness", "Concentricity", "Talyrond 252", "Retrofit", "SeRound" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685562e996a061ed063d772", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT90G Portable Surface Roughness", "description": "RT90G roughness tester is unique in its category because it features a built-in calculation unit and measurement procedure, thus being the first ''All-in-one’’ roughness tester. Extremely compact and easy to handle, it conveniently allows positioning also on large size pieces, thanks to built-in micrometrics with 100 mm range. The shiny 3.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances are immediately displayed and can be downloaded on PC or printer using the external printer. The internal reference allows to perform analyses also on W waviness parameters, while the bistable pick-up holder allows measuring with one simple gesture, with or without skid, as required.\n\nCHARACTERISTICS:\nMeasurement range:\t±500μm\nResolution\t0,001 μm\nCut-off lenght\t0,25 – 0,8 - 2,5 mm\nCut-off number\tSelectable from 1 to 19\nTraverse lenght: \tUp to 50 mm\nPick-up:\tInductive, it can be rotated of 90° for lateral measurements\nMeasurement parameters \t\n54 parameters\n\n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsk, Rku, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, Pdc, PPc, R, Rx, AR, Wte, W, AW, Wx, Rke, Rpke, Rvke, Mr1e, Mr2e Rmax, R3z, R3zm)\n\nGraphs displayed:\tRoughness, waviness, primary, total, bearing capacity curve, and distribution of ordinates.\nUnit of measurement: \tMillimeters and inches\nInterface:TFT, 3.7'' colour graphic Touchscreen display and 3 waterproof membrane buttons\n\nLanguages: \tItalian, French, English, German, Spanish and Portuguese\nMemory: \tUp to 1000 measurements\nAccessories:\tRT90G roughness tester with SB10/60 pick-up, 110-230V battery charger, roughness sample, Case, User manual.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2,5 mm", "Mr2, Pt", "Mr2e Rmax", "User manual", "100 mm range", "54 parameters", "50 mm Pick-up", "Cut-off number", "Cut-off lenght", "icon interface", "Traverse lenght", "SB10/60 pick-up", "external printer", "calculation unit", "inches Interface", "roughness sample", "Measurement range", "large size pieces", "internal reference", "one simple gesture", "relative tolerances", "lateral measurements", "measurement procedure", "W waviness parameters", "measurement parameters", "RT90G roughness tester", "bistable pick-up holder", "110-230V battery charger", "RT90G Portable Surface Roughness", "colour graphic Touchscreen display", "Up to 1000 measurements Accessories", "shiny 3.7’’ colour touchscreen display", "primary, total, bearing capacity curve", "3 waterproof membrane buttons Languages" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 46, "imageuri": "https://productimages.withfloats.com/actual/5f7b1e74ff319600013478f7.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1e74ff319600013478f7.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:46:22.181Z", "updatedon": "2024-07-04T09:41:16Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt90g-portable-surface-roughness/46", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Surface Roughness Tester", "tags": [ "Portable Roughness", "Surface Roughness", "ISO standards", "Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685560064f7f623a8ef3983", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SeRound PC Retrofit Roundness Measuring Machine", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "8 mm", "5 rpm", "20 Kg", "0,05 μ", "0,04 μ", "250 mm", "600 μm", "500 mm", "± 0,6 mm", "Pls Note", "high level", "Other speeds", "minimum zone", "Polar filter", "unwanted data", "table surface", "Measure window", "Leveling range", "default cycles", "Rotation speed", "same parameters", "numatic bearing", "minimum squares", "amplifier range", "Centering range", "table centering", "Data acquisition", "graphical output", "Salbro Engineers", "rotating spindle", "Retrofit package", "Machine pictures", "profile filtering", "measurement chain", "Stylus resolution", "Software Retrofit", "Coaxiality Run-out", "capital investment", "instrument control", "measurement accuracy", "Proprietary products", "roundness parameters", "minimum superior plan", "maximum inferior plan", "Linear Filter cut-off", "Max work piece weight", "one precise instrument", "Spindle rotation error", "Stylus measuring range", "performance reliability", "optimal measuring speed", "Max work piece diameter", "Respective Manufacturers", "Air-bearing rotary table", "many similar work pieces", "SeRound Analysis software", "12 months warranty period", "Electronic Interface unit", "The Hommel 1000 instrument", "interactive user interface", "transmission characteristics", "maximum subscribed circumference", "minimum circumscribed circumference", "SeRound PC Retrofit Roundness Measuring Machine PC Retrofit Roundness Measuring Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 57, "imageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.24Z", "updatedon": "2024-07-03T13:45:36.24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/seround-pc-retrofit-roundness-measuring-machine/57", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685548afcd2841c9c9ec3dd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 60, "imageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:22.21Z", "updatedon": "2024-07-03T13:39:22.21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/hommel-1000-seround-retrofit/60", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false }, { "_id": "6685520392cd4214983119bd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT120 Profilometer-roughness tester", "description": "RT120 was conceived from the need to characterize roughness and micro-profiles on pieces, even complex ones, using one device, thanks to the RT120 “all-in-one” logic and Profile Studio analysis software. Profile Studio software was developed to be extremely user friendly and easy to use by the operator; all functions required for the characterization of the profile and roughness are available in the right toolbar and divided into categories, each one featuring a different colour. New dimensions and roughness analyses can be input on the same profile and displayed on the same screen, in order to allow the operator to carry out a complete analysis of the piece, with one single measurement. Thanks to the self-comparing function, it is possible to reconstruct all dimensions and dimensional tolerances of a reference profile on a new profile, thus saving a considerable amount of time for the check in series. The roughness parameters are elaborated according to the most recent standards like ISO 4287, ISO 13565-1 and -2, ISO 12085, VDA 2007 for a total of 70 parameters calculated.\n\nParameters calculated:\t \nISO 4287:09\tRp, Rt, Rv, Rc, Rz, Rzjis, Ra, Ra75, RSm, RΔq, Rsk, Rku, Rδc, RPc, RmrRel Wp, Wt, Wv, Wc, Wz, Wa, Wq, WSm, WΔq, Wsk, Wku, Wδc, WPc, WmrRel Pp, Pt, Pv, Pc, Pz, Pa, Pq, PΔSm, Pq, Psk, Pku, Pδc, PPc, PmeRel\nISO 13565:96 \tRk, Rpk, Rvk, Mr1, Mr2, A1, A2\nDIN 4768:90 \tRy5, Rmax, R3z, R3zMax, PtDIN\nISO12085:98 \tPt, R, AR, Rx, Wte, W, AW, Wx, Rke, Rpke, Rvke\nVDA 2007\tWD, WDc, WDt, WDSm\nMeasurement range in X: \t120 mm (4.72 in)\nMeasurement range in Z:\t3 mm(0.12 in) o 5 mm (0.39 in)\nResolution in X: \t0.1 μm (0.02 μin)\nResolution in Z:\t0.1 nm (0.004 μin)\nMeasurement speed:\t0.25 – 0.5 – 1 – 2 mm/s (0.01 – 0.02 – 0.04 – 0.08 in/s)\nTip sizes:\tDiamond cone 60° angle 2 µm (78 µin) closing radius\nTraverse length of column:\tColumn with a positioning of 320 mm (12.6 in)\nCNC cycles:\tCNC automatic measurement and Positioning cycles with self-comparison\nConnection:\tUSB interface towards Windows© PC\nSoftware:\tProfile Studio\nLanguages:\tItalian, French, English, German, Spanish, Portuguese and Slovenian\nSizes:\tLxDxH1100 x 570 x 720 mm (43.3 x 22.4 x 28.3 in)\nOverall weight:\t50 kg(92 lbs)\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "02 μ", "5 mm", "0.1 μ", "50 kg", "720 mm", "320 mm", "78 µin", "0.1 nm", "120 mm", "ISO 4287", "0.004 μin", "Tip sizes", "WmrRel Pp", "RmrRel Wp", "one device", "CNC cycles", "VDA 2007 WD", "same screen", "new profile", "PC Software", "same profile", "70 parameters", "USB interface", "right toolbar", "New dimensions", "Overall weight", "closing radius", "Slovenian Sizes", "Traverse length", "recent standards", "different colour", "Measurement speed", "Measurement range", "reference profile", "complete analysis", "Positioning cycles", "roughness analyses", "considerable amount", "roughness parameters", "dimensional tolerances", "one single measurement", "Diamond cone 60° angle", "self-comparing function", "Profile Studio software", "Profile Studio Languages", "CNC automatic measurement", "self-comparison Connection", "Profile Studio analysis software", "RT120 Profilometer-roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 62, "imageuri": "https://productimages.withfloats.com/actual/5f7b1cb2ff319600013478d1.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1cb2ff319600013478d1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:28:35.755Z", "updatedon": "2024-07-03T13:28:35.755Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt120-profilometer-roughness-tester/62", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "Surface Roughness", "contour", "ISO 13565-1", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.001, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }