Home> Products> same time

{ "products": [ { "_id": "668556c90610e119044be8ef", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Voting Machines", "description": "The Electronic Voting Machine (EVM) is a voting system completely developed In-House jointly by Salbro Engineers and Base Technologies. Both these companies jointly handle projects and operate from the same premises in Mumbai, India. \nOur EVM’s are Government Test Lab certified and are one of the most sort-out piece of equipment available in the market today. Reading through this catalogue will help you know about the features this product has to offer.Our system is accurate, robust, user friendly and “Is performance” driven in its operations.\n\nEVM Features\n\n1) Controller based system of Voting in comparison to Previous Ballot Paper Voting.\n2) Tamper Proof. No influence of radioactive waves, electromagnetic waves etc\n3) Electro – Mechanical buttons are used in the ballot units\n4) Registering of votes is instant. Saves time and cost.\n\nField configurable: Configure the EVM via Evm_App software to set\n1) No of Candidates contesting elections\n2) No of Categories (upto 15 Categories) OR no category\n3) No of votes the voter is permitted to cast.\n4) The system does not allow the voter to vote twice for a candidate.\n5) Compulsory/Not compulsory voting.\n o Should the voter cast all permissible votes or Not?\n o No of winners to be selected from each category\n\nPc/Laptop is connected to EVM control units only to configure them before voting starts and for retrieving of vote data after election ends else the EVM system works independently.\n\nA total of 65,000 voters can cast votes in one EVM.\n65,000 votes for each candidate can be cast.\nBasic model of our EVM accepts up to 16 contestants /candidates in the race. Exceeding 16 candidates we cascade/ attach additional Ballot unit of 16 buttons each.\nOne EVM control unit can handle up to 64 candidates.\nNo loss of voting data even in the case of power failure.\nNo invalid votes can be cast\nVoting data is stored in memory chips and the data is stored for decades.\nMemory chips can only be erased by authenticated users only via the PC/Laptop\n“Evm_App” software.\nTransfer data from Evm Control Units to Evm_App for consolidated reports, excel exports.\nEncoded / Encrypted files can be uploaded unto server in a secure manner.\nReusability.\nConduct voting even in the absence of electrical supply.\nEco Friendly.\n\nPC Software – EVM Data Analysis\nThe PC software is a windows based desktop application and it provides the user with a graphical user interface in\nRequesting stored data from all controls units.\nConfiguring the EVM in setting the\nNo of Candidates contesting elections.\nNo of Categories  (11 Categories in all) OR no category\nNo of votes the voter is permitted to cast.\nCompulsory/Not compulsory voting\nNo of winners to be selected from each category\nSetting the communication Port for hand shaking between software and control unit.\nReceiving data from control units, decoding it and saving data into respective encrypted files.\nIt does not consider data from the same unit even if multiple requests are made.\nIt outputs a consolidated report considering data from all units that were connected to PC.\n\nApplications\no Co-Op Hsg Societies for Managing Committee.\no Co-Op Banks .\no Associations n Trusts (Board n Trustee selections)\no Corporate Companies (Board, Secretary n Chairman selections)\no Panchayat & Municipal elections.\no Schools, Colleges & Universities.\no General n Assembly elections & any other election.\n\nServices\nWe also provide services like conducting and supervising elections until Election Result is declared.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "vote data", "out piece", "same unit", "16 buttons", "EVM system", "PC Software", "voting data", "Basic model", "Co-Op Banks", "65,000 votes", "EVM Features", "memory chips", "Tamper Proof", "ballot units", "invalid votes", "voting system", "secure manner", "power failure", "election ends", "same premises", "voting starts", "16 contestants", "other election", "controls units", "Election Result", "Voting Machines", "Evm_App software", "Salbro Engineers", "permissible votes", "multiple requests", "electrical supply", "radioactive waves", "Base Technologies", "EVM Data Analysis", "EVM control units", "Mechanical buttons", "Trustee selections", "Managing Committee", "communication Port", "Corporate Companies", "Municipal elections", "Chairman selections", "desktop application", "authenticated users", "Co-Op Hsg Societies", "Government Test Lab", "consolidated reports", "One EVM control unit", "electromagnetic waves", "Not compulsory voting", "additional Ballot unit", "graphical user interface", "respective encrypted files", "Previous Ballot Paper Voting", "General n Assembly elections", "The Electronic Voting Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 50, "imageuri": "https://productimages.withfloats.com/actual/5f4653b62a035b0001e29a84.bmp", "tileimageuri": "https://productimages.withfloats.com/actual/5f4653b62a035b0001e29a84.bmp", "images": [ { "imageuri": "https://fpimages.withfloats.com/actual/67d012562b7d79fd124bd98a.jpg", "tileimageuri": "https://fpimages.withfloats.com/actual/67d012562b7d79fd124bd98a.jpg" }, { "imageuri": "https://fpimages.withfloats.com/actual/67d012303b02afe4871d687b.jpg", "tileimageuri": "https://fpimages.withfloats.com/actual/67d012303b02afe4871d687b.jpg" }, { "imageuri": "https://fpimages.withfloats.com/actual/67d012294e51c112a0ebf5c7.jpg", "tileimageuri": "https://fpimages.withfloats.com/actual/67d012294e51c112a0ebf5c7.jpg" } ], "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:48:57.685Z", "updatedon": "2025-03-11T10:37:37.014Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/voting-machines/50", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Election Voting Machine", "tags": [ "Transparent Results", "Electronic Voting", "election", "vote", "multiple voting", "non tamperable", "EVM", "EVM manufacturer", "Electronic Voting Machine", "Election voting System", "Voting Systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "66855670c0e30a1804aed58b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roundness n Cylindricity Measuring Machines", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nRetrofit your existing Roundness and Cylindricity Instruments with SeRound an Inhouse developed Retrofit package comprising of Electronics and Software to suit machines for various manufactures. \n\n•\tSeRound the Software Retrofit for Talyrond252 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to analyze / detect the following \n•\tParameters: Roundness,Concentricity,Relative Ecentricity, Flatness. Squareness, Coaxiality, Cylindricity, Axial Runout, Radial Runout, Face Parallelism,Straightness,Parallelism\n\nData acquisition, profile filtering, evaluation of the roundness and other parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) Arm and Column movement (Incremental / Absolute), Gauge Position and orientation has been realized by SeRound. \n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. \n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nTalyrond 252 with SeRound Analysis software Retrofit comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "Axial Runout", "Radial Runout", "Measure window", "default cycles", "Gauge Position", "same parameters", "table centering", "Column movement", "amplifier range", "measuring speed", "Data acquisition", "Face Parallelism", "other parameters", "graphical output", "Salbro Engineers", "Machine Pictures", "profile filtering", "Retrofit Packages", "existing Roundness", "instrument control", "Relative Ecentricity", "various manufactures", "PC Retrofit Roundness", "one precise instrument", "respective Manufactures", "Cylindricity Instruments", "many similar work pieces", "12 months warranty period", "Electronic Interface unit", "interactive user interface", "Cylindricity Measuring Machines", "SeRound Analysis software Retrofit" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:28.094Z", "updatedon": "2024-07-03T13:53:21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//pc-retrofit-roundness-n-cylindricity-measuring-machines/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [ "Roundness", "Flatness", "Cylindricity", "Radial Runout", "Axial Runout", "Straightness", "Concentricity", "Talyrond 252", "Retrofit", "SeRound" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685566763a8700a4014261a", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Electronic Voting Machine", "description": "The Electronic Voting Machine (EVM) is a voting system completely developed In-House jointly by Salbro Engineers and Base Technologies. Both these companies jointly handle projects and operate from the same premises in Mumbai, India. \nOur EVM’s are Government Test Lab certified and are one of the most sort-out piece of equipment available in the market today. Reading through this catalogue will help you know about the features this product has to offer.Our system is accurate, robust, user friendly and “Is performance” driven in its operations.\n\nEVM Features\n\n1) Controller based system of Voting in comparison to Previous Ballot Paper Voting.\n2) Tamper Proof. No influence of radioactive waves, electromagnetic waves etc\n3) Electro – Mechanical buttons are used in the ballot units\n4) Registering of votes is instant. Saves time and cost.\n\nField configurable: Configure the EVM via Evm_App software to set\n1) No of Candidates contesting elections\n2) No of Categories (upto 15 Categories) OR no category\n3) No of votes the voter is permitted to cast.\n4) The system does not allow the voter to vote twice for a candidate.\n5) Compulsory/Not compulsory voting.\n o Should the voter cast all permissible votes or Not?\n o No of winners to be selected from each category\n\nPc/Laptop is connected to EVM control units only to configure them before voting starts and for retrieving of vote data after election ends else the EVM system works independently.\n\nA total of 65,000 voters can cast votes in one EVM.\n65,000 votes for each candidate can be cast.\nBasic model of our EVM accepts up to 16 contestants /candidates in the race. Exceeding 16 candidates we cascade/ attach additional Ballot unit of 16 buttons each.\nOne EVM control unit can handle up to 64 candidates.\nNo loss of voting data even in the case of power failure.\nNo invalid votes can be cast\nVoting data is stored in memory chips and the data is stored for decades.\nMemory chips can only be erased by authenticated users only via the PC/Laptop\n“Evm_App” software.\nTransfer data from Evm Control Units to Evm_App for consolidated reports, excel exports.\nEncoded / Encrypted files can be uploaded unto server in a secure manner.\nReusability.\nConduct voting even in the absence of electrical supply.\nEco Friendly.\n\nPC Software – EVM Data Analysis\nThe PC software is a windows based desktop application and it provides the user with a graphical user interface in\nRequesting stored data from all controls units.\nConfiguring the EVM in setting the\nNo of Candidates contesting elections.\nNo of Categories  (11 Categories in all) OR no category\nNo of votes the voter is permitted to cast.\nCompulsory/Not compulsory voting\nNo of winners to be selected from each category\nSetting the communication Port for hand shaking between software and control unit.\nReceiving data from control units, decoding it and saving data into respective encrypted files.\nIt does not consider data from the same unit even if multiple requests are made.\nIt outputs a consolidated report considering data from all units that were connected to PC.\n\nApplications\no Co-Op Hsg Societies for Managing Committee.\no Co-Op Banks .\no Associations n Trusts (Board n Trustee selections)\no Corporate Companies (Board, Secretary n Chairman selections)\no Panchayat & Municipal elections.\no Schools, Colleges & Universities.\no General n Assembly elections & any other election.\n\nServices\nWe also provide services like conducting and supervising elections until Election Result is declared.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "vote data", "out piece", "same unit", "16 buttons", "EVM system", "PC Software", "voting data", "Basic model", "Co-Op Banks", "65,000 votes", "EVM Features", "memory chips", "Tamper Proof", "ballot units", "invalid votes", "voting system", "secure manner", "power failure", "election ends", "same premises", "voting starts", "16 contestants", "other election", "controls units", "Election Result", "Evm_App software", "Salbro Engineers", "permissible votes", "multiple requests", "electrical supply", "radioactive waves", "Base Technologies", "EVM Data Analysis", "EVM control units", "Mechanical buttons", "Trustee selections", "Managing Committee", "communication Port", "Corporate Companies", "Municipal elections", "Chairman selections", "desktop application", "authenticated users", "Co-Op Hsg Societies", "Government Test Lab", "consolidated reports", "One EVM control unit", "electromagnetic waves", "Not compulsory voting", "additional Ballot unit", "graphical user interface", "respective encrypted files", "Previous Ballot Paper Voting", "General n Assembly elections", "The Electronic Voting Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 47, "imageuri": "https://productimages.withfloats.com/actual/5f7b2e21896f78000161cb75.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b2e21896f78000161cb75.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:19.402Z", "updatedon": "2025-03-11T13:53:50.218Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//electronic-voting-machine/47", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Election Voting Machine", "tags": [ "Electronic Voting", "Vote", "Voting", "Voting Center", "Voting Booth", "Election", "Multiple Voting", "Electronic Voting Machine", "EVM", "EVM manufacturer" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685560064f7f623a8ef3983", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SeRound PC Retrofit Roundness Measuring Machine", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "8 mm", "5 rpm", "20 Kg", "0,05 μ", "0,04 μ", "250 mm", "600 μm", "500 mm", "± 0,6 mm", "Pls Note", "high level", "Other speeds", "minimum zone", "Polar filter", "unwanted data", "table surface", "Measure window", "Leveling range", "default cycles", "Rotation speed", "same parameters", "numatic bearing", "minimum squares", "amplifier range", "Centering range", "table centering", "Data acquisition", "graphical output", "Salbro Engineers", "rotating spindle", "Retrofit package", "Machine pictures", "profile filtering", "measurement chain", "Stylus resolution", "Software Retrofit", "Coaxiality Run-out", "capital investment", "instrument control", "measurement accuracy", "Proprietary products", "roundness parameters", "minimum superior plan", "maximum inferior plan", "Linear Filter cut-off", "Max work piece weight", "one precise instrument", "Spindle rotation error", "Stylus measuring range", "performance reliability", "optimal measuring speed", "Max work piece diameter", "Respective Manufacturers", "Air-bearing rotary table", "many similar work pieces", "SeRound Analysis software", "12 months warranty period", "Electronic Interface unit", "The Hommel 1000 instrument", "interactive user interface", "transmission characteristics", "maximum subscribed circumference", "minimum circumscribed circumference", "SeRound PC Retrofit Roundness Measuring Machine PC Retrofit Roundness Measuring Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.24Z", "updatedon": "2024-07-03T13:45:36.24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/seround-pc-retrofit-roundness-measuring-machine/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685548afcd2841c9c9ec3dd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 41, "imageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:22.21Z", "updatedon": "2024-07-03T13:39:22.21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//hommel-1000-seround-retrofit/41", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685520392cd4214983119bd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT120 Profilometer-roughness tester", "description": "RT120 was conceived from the need to characterize roughness and micro-profiles on pieces, even complex ones, using one device, thanks to the RT120 “all-in-one” logic and Profile Studio analysis software. Profile Studio software was developed to be extremely user friendly and easy to use by the operator; all functions required for the characterization of the profile and roughness are available in the right toolbar and divided into categories, each one featuring a different colour. New dimensions and roughness analyses can be input on the same profile and displayed on the same screen, in order to allow the operator to carry out a complete analysis of the piece, with one single measurement. Thanks to the self-comparing function, it is possible to reconstruct all dimensions and dimensional tolerances of a reference profile on a new profile, thus saving a considerable amount of time for the check in series. The roughness parameters are elaborated according to the most recent standards like ISO 4287, ISO 13565-1 and -2, ISO 12085, VDA 2007 for a total of 70 parameters calculated.\n\nParameters calculated:\t \nISO 4287:09\tRp, Rt, Rv, Rc, Rz, Rzjis, Ra, Ra75, RSm, RΔq, Rsk, Rku, Rδc, RPc, RmrRel Wp, Wt, Wv, Wc, Wz, Wa, Wq, WSm, WΔq, Wsk, Wku, Wδc, WPc, WmrRel Pp, Pt, Pv, Pc, Pz, Pa, Pq, PΔSm, Pq, Psk, Pku, Pδc, PPc, PmeRel\nISO 13565:96 \tRk, Rpk, Rvk, Mr1, Mr2, A1, A2\nDIN 4768:90 \tRy5, Rmax, R3z, R3zMax, PtDIN\nISO12085:98 \tPt, R, AR, Rx, Wte, W, AW, Wx, Rke, Rpke, Rvke\nVDA 2007\tWD, WDc, WDt, WDSm\nMeasurement range in X: \t120 mm (4.72 in)\nMeasurement range in Z:\t3 mm(0.12 in) o 5 mm (0.39 in)\nResolution in X: \t0.1 μm (0.02 μin)\nResolution in Z:\t0.1 nm (0.004 μin)\nMeasurement speed:\t0.25 – 0.5 – 1 – 2 mm/s (0.01 – 0.02 – 0.04 – 0.08 in/s)\nTip sizes:\tDiamond cone 60° angle 2 µm (78 µin) closing radius\nTraverse length of column:\tColumn with a positioning of 320 mm (12.6 in)\nCNC cycles:\tCNC automatic measurement and Positioning cycles with self-comparison\nConnection:\tUSB interface towards Windows© PC\nSoftware:\tProfile Studio\nLanguages:\tItalian, French, English, German, Spanish, Portuguese and Slovenian\nSizes:\tLxDxH1100 x 570 x 720 mm (43.3 x 22.4 x 28.3 in)\nOverall weight:\t50 kg(92 lbs)\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "02 μ", "5 mm", "0.1 μ", "50 kg", "720 mm", "320 mm", "78 µin", "0.1 nm", "120 mm", "ISO 4287", "0.004 μin", "Tip sizes", "WmrRel Pp", "RmrRel Wp", "one device", "CNC cycles", "VDA 2007 WD", "same screen", "new profile", "PC Software", "same profile", "70 parameters", "USB interface", "right toolbar", "New dimensions", "Overall weight", "closing radius", "Slovenian Sizes", "Traverse length", "recent standards", "different colour", "Measurement speed", "Measurement range", "reference profile", "complete analysis", "Positioning cycles", "roughness analyses", "considerable amount", "roughness parameters", "dimensional tolerances", "one single measurement", "Diamond cone 60° angle", "self-comparing function", "Profile Studio software", "Profile Studio Languages", "CNC automatic measurement", "self-comparison Connection", "Profile Studio analysis software", "RT120 Profilometer-roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 39, "imageuri": "https://productimages.withfloats.com/actual/5f7b1cb2ff319600013478d1.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1cb2ff319600013478d1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:28:35.755Z", "updatedon": "2024-07-03T13:28:35.755Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt120-profilometer-roughness-tester/39", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "Surface Roughness", "contour", "ISO 13565-1", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685515b7697320a5c5e00a6", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Profilometer PGS 200 Contour Measuring Instrument", "description": "The new profilometer PGS 200 combines the need to have a highly versatile tool, which ensures ease of installation in production environments, however, that in measuring rooms to ensure the accuracy of the measures to be always certain of the results obtained. With the concept \"all at once\" the PGS 200 with a few clicks is now operating through the Profile Studio analysis software in a short time the operator is able to measure even the most complex\n\nKey Features\n• Structure \"all in one\", no external electronics.\n• Treated alloy base that combines high rigidity and light weight.\n• Measuring range Y- 50 mm, X- 220mm\n• Measurement speed: 0.5, 1, 2 mm / sec\n• Angle measurement: up 70 °, 85 ° down.\n• CNC column position 320 mm. Ability to run automatic cycles, not in manual column\n• Autocomparazione of measurements.\n• © Windows software with aid to the operator through the Wizard to the most complex operations\n• Advanced CAD functions (tolerances, errors of form)\n\nThe new PGS 200 profilometer is a project where the goal was to create a system for the characterization of surfaces by extreme flexibility. Following this philosophy has created a machine that, thanks to the considerable size and weight reduction (inside the machine weighs just over 40 kg) allows easy installation in any environment, which may be metrology laboratory or production line.\n\nThe acquisition system is based on a 200 PGS traverse movement, through which the polar probe is kept in contact with the work piece. The system is combined with two Nano sensors guarantees result with in a working area of 50mm x 220 mm while maintaining a high level of accuracy.\n\nThe base is made of light alloy; this combination provides a significant reduction in weight while maintaining a high resistance to scratching and wear. The column positioning allows you to move the Traverse up to a height of 380mm above base.\n\nUsing the positioner mounted on the base of the instrument, the loading and unloading of the pieces are greatly simplified since the positioner can be moved along a special guide allowing you to load the piece off from work and then bringing it close with precision. With the software Profile Studio study, all the functions necessary for the characterization of the profile are easily accessible thanks to the tool bar right where every family to a different color (lines, arcs, points), this makes each function easily recognizable and accessible with a single clicks.\n\nIn the tool bar on the left of the group is represented in the measured profiles so you can easily switch from an atrium or, if desired, assist them in a multi-screen. Same bar, also consists the major functions for instrument control including the position of the axes and buttons for starting measurement and calibration position. With this interface the operator with a glance full control of the application.\n\nFor more complex procedures used is the philosophy of the Wizard or the operator is guided step by step through each elementary operations,\ngreatly simplifying the entire procedure. This type of assistance is used for example for calibration and the search for points of maximum\nand minimum during the placement of a piece.\n\nThe CAD program is the basis of highly advanced, all entities are dynamic and therefore editable after insertion. With the functions \"Best Fit\" the operator with a single click you can place a arc or a line on the profile because the program will automatically recognize the area to the\nminimum error in which include this element. Through the program you can control every movement of the tool by setting the measurement parameters for each of the measures for automated* repeated measurements, you can also set facilitating the movement of the limits in this way, the positioning during difficult measures such as inside holes and groves.\n\nThrough the \"Autocomparazione\" the program automatically rebuilds, measured on a new profile, construction and dimensional tolerances of these making a reference profile, so high speed control pieces of the same lot.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2 mm", "40 kg", "tool bar", "same lot", "Best Fit", "Same bar", "X- 220mm", "work piece", "short time", "high level", "CAD program", "polar probe", "light alloy", "new profile", "working area", "light weight", "single click", "Key Features", "minimum error", "special guide", "manual column", "high rigidity", "50mm x 220 mm", "versatile tool", "production line", "major functions", "different color", "high resistance", "Measuring range", "measuring rooms", "weight reduction", "entire procedure", "automatic cycles", "easy installation", "Angle measurement", "considerable size", "reference profile", "Measurement speed", "difficult measures", "acquisition system", "column positioning", "complex procedures", "complex operations", "© Windows software", "instrument control", "Treated alloy base", "extreme flexibility", "CNC column position", "glance full control", "calibration position", "metrology laboratory", "external electronics", "new profilometer PGS", "repeated measurements", "elementary operations", "significant reduction", "dimensional tolerances", "measurement parameters", "Advanced CAD functions", "production environments", "new PGS 200 profilometer", "200 PGS traverse movement", "high speed control pieces", "two Nano sensors guarantees", "software Profile Studio study", "Profile Studio analysis software", "Profilometer PGS 200 Contour Measuring Instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 38, "imageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:25:47.401Z", "updatedon": "2024-07-03T13:30:00Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//profilometer-pgs-200-contour-measuring-instrument/38", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "contour", "Contour Measurement", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210dfef6cf79500017ec298", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "LITEsurf Palmtop Roughness", "description": "The new LITEsurf roughness tester was born from the forty-year experience that SM has in measuring and designing roughness tester for production areas. This is why we know well what are the characteristics that are really necessary for an instrument of this family that has to go to work there right with you: compactness, robustness, ease of use and clarity of the results, these are the characteristics that they will make LITEsurf the ideal partner for roughness characterizing on your parts. Are you considering buying a new palmtop roughness tester? We accept the challenge, because we are sure that the new LITEsurf roughness tester is a step forward compared to the other opponents! Are you not convinced? We give you 5 good reasons!\n\nConnectivity: Today technology allows us to share information quickly and easily, can your new roughness tester do it? The new LITEsurf, thanks to the integrated Bluetooth and USB connection, allows you to connect the smartphones, tablets and PCs in an intuitive and fast way, then sharing information with the rest of the world.\n\nFlexibility: you want, with a single instrument, to measure zones horizontally, vertically, up / down or sideways, many will answer you impossible, but LITEsurf can do all this. Through the probe rotatable laterally by 90 ° and to the balanced and preloaded sensor, each area of the piece can be measured.\n\nRobustness: A robust palmtop roughness tester with few plastic and a lot of metal? Difficult to find on the market you will think. But is not so! The LITEsurf has a light alloy body machined from solid combined with a PC / ABS body that guarantee high rigidity with high impact resistance. The tool that is not afraid of the bumps and accidental falls inevitable in normal use in production.\n\nReporting: Do you need to generate customized reports with company logo, description, notes and even a photo of the measured detail and save them in a standard format such as in PDF or Excel for easy sharing and archiving? Many will offer you additional paid software and perhaps not so flexible; LITEsurf by connecting to an external device such as your Smartphone or tablet on which the free \"Roughness studio base\" APP is installed, can do all this with ease.\n\nBattery life: How often are battery-powered devices discharged just when they are needed? We as you know it well, for this reason a sophisticated charge management system has been integrated into the LITEsurf which performs a full charge in 50 minutes, guaranteeing 10 hours of work and at least 300 roughness measurements. Don't you have this time? Just give us 3 minutes of charge and we guarantee you to perform at least 20 measurements.\n\nThe LITEsurf is charged via the same cable and charger that you use to charge your Smartphone or Tablet (USB type C), a nice simplification!\n\nThe instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.\n\nFEATURES:\nMeasurement range: 250 um (+ 50 um -200 um)\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 17,5 mm\nPick up: Optical, it can be rotated of 90° for lateral measurements\nMeasurement parameters: 81 roughness parameters\n8 Parameters ISO: Ra, Rq, Rt, Rz, Rc, Rmax, RSm, RPc,\nMOTIF: Pt, R, AR, Rx, Ppc\nUnit of measurement: Millimeters and inches\nInterface: OLED graphic display and 3 waterproof membrane buttons\nLanguages:Italian, French, English, German, Spanish, Portuguese\nMemory: Up to 18000 measurements with only parameters Up to 30 measurements with graph\nAccessories: LITEsurf roughness tester, USB battery charger, USB cable, 8 mm diameter end-plug for connection to stand, roughness sample, plastic case, User Manual\n\nSalbro Engineers are the authorized dealers for LITEsurf in India ", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "PCs", "use", "90 °", "rest", "ease", "probe", "zones", "world", "Today", "parts", "piece", "family", "tablets", "results", "clarity", "balanced", "fast way", "Bluetooth", "challenge", "intuitive", "integrated", "robustness", "technology", "smartphones", "information", "Flexibility", "compactness", "Connectivity", "ideal partner", "5 good reasons", "USB connection", "other opponents", "characteristics", "preloaded sensor", "production areas", "single instrument", "LITEsurf SM Product", "new roughness tester", "forty-year experience", "LITEsurf Palmtop Roughness", "new palmtop roughness tester", "new LITEsurf roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 34, "imageuri": "https://productimages.withfloats.com/actual/63c7b5da59521a000183ffc0.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7b5da59521a000183ffc0.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T12:17:51.518Z", "updatedon": "2024-07-05T10:51:01Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//litesurf-palmtop-roughness/34", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Roughnesss", "Surface Roughness", "Palmtop Roughness", "Ra", "Surface Metrology", "Roughness Tester", "surface analysis", "Rz", "Roughness Tester", "Portable Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210c557584a740001165816", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R300 Laboratary Roundness Tester", "description": "R300 roundness tester is one of the best devices worldwide for the characterization of surfaces, born from thirty years of experience boasted by SM in this field, it was specifically designed to measure bulky and heavy pieces, with utmost accuracy.\nR300 features 3, pneumostatically supported, metrological measurement and positioning axes that ensure fluent movements without frictions and remarkable sturdiness of the entire system.\nThe main application of R300 consists in the characterization of large size bearings, where all those essential characteristics for the final quality of the product must be determined, among which roundness and race angles, which are measured by following the piece's profile with more axes working at the same time, thus generating a considerable number of measurements.\n\nCHARACTERISTICS:\n\nPneumostatic plate\nPlatform diameter: \t450 mm\nExpansion diameter: 800 mm\nMaximum measureable diameter: 1000 mm\nAxial bearing capacity: 1200 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: \t0,5 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm\nLevelling range: \t± 1°\nResolution: \t0,1°\n\nPneumostatic R axis\nUseful traverse length: 500 mm\nLinearity: ≤ 0,5 μm su 500 mm\nSpeed: 0,2 – 10 mm/s\nResolution: 0,1 μm\n\nC axis (pneumostatic column)\nUseful traverse length: 500 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution: 0,1 μm\n\nPick-up\nMeasurement positioning: In three positions (horizontal, vertical, lateral)\nMeasurement strenght : Internal/esternal 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional of lenght 80 - 150 – 240 mm\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "field", "bulky", "profile", "surfaces", "frictions", "same time", "experience", "race angles", "measurements", "heavy pieces", "thirty years", "best devices", "entire system", "R300 features", "final quality", "R300 SM Product", "utmost accuracy", "characterization", "positioning axes", "main application", "fluent movements", "large size bearings", "considerable number", "remarkable sturdiness", "R300 roundness tester", "metrological measurement", "essential characteristics", "R300 Laboratary Roundness Tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 29, "imageuri": "https://productimages.withfloats.com/actual/63c7c28845a22b0001e71c35.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c28845a22b0001e71c35.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:24:23.638Z", "updatedon": "2023-02-06T14:33:23Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r300-laboratary-roundness-tester/29", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness", "cylindricity", "large Size Bearings", "Laboratary Roundness Tester", "large size bearings" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }