Home> Products> short period

{ "products": [ { "_id": "6210c45e0f41fd000113694d", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R250 Labortary Roundness Tester", "description": "R250 roundness tester was conceived from the need to characterize pieces with circular and even complex geometries with utmost accuracy, and it is the ideal instrument to satisfy multiple measurement needs in the mechanical, motor, aerospace and machine manufacturing industries.\nThanks to its solid structure consisting of a base made in diabase and pneumostatically supported plate, it can accurately measure pieces of also considerable weight.\nThe device is matched to Circom software that was conceived to be extremely user-friendly and easy to use, thus allowing to train an operator within a short period of time, reducing training and testing costs.\nThe software allows to analyze the following geometric tolerances: roundness, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, coaxiality, run out, total run out, thickness variation. For complex surfaces where gaps are present, Circom is able to eliminate them automatically or the operator can intervene manually, removing inconsistent profile sections.\nIntegrative packages can be added to the basic application, such as for example harmonic analysis that, through FFT algorithm, allows to analyze each single sinusoidal component of the measured profile, essential with regards to bearings.\n\nCHARACTERISTICS:\n\nPneumostatic plate\nPlatform diameter: \t450 mm\nExpansion diameter: 800 mm\nMaximum measureable diameter: 1000 mm\nAxial bearing capacity: 1200 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: 0,5 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm\nLevelling range: \t± 1°\nResolution: \t0,1°\n\nPneumostatic R axis\nUseful traverse length: \t500 mm\nLinearity: \t≤ 0,5 μm su 500 mm\nSpeed: \t0,2 – 10 mm/s\nResolution: \t0,1 μm\n\nC axis (pneumostatic column)\nUseful traverse length: 500 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution: 0,1 μm\n\nPick-up\nMeasurement positioning: In three positions (horizontal, vertical, lateral)\nMeasurement strenght : Internal/esternal 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional of lenght 80 - 150 – 240 mm\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "time", "gaps", "base", "plate", "pieces", "device", "regards", "bearings", "conicity", "circular", "training", "operator", "aerospace", "linearity", "cone shape", "coaxiality", "parallelism", "cylindricity", "short period", "FFT algorithm", "concentricity", "testing costs", "R250 SM Product", "solid structure", "Circom software", "utmost accuracy", "complex surfaces", "ideal instrument", "basic application", "complex geometries", "thickness variation", "considerable weight", "Integrative packages", "R250 roundness tester", "example harmonic analysis", "multiple measurement needs", "single sinusoidal component", "inconsistent profile sections", "following geometric tolerances", "R250 Labortary Roundness Tester", "machine manufacturing industries" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 28, "imageuri": "https://productimages.withfloats.com/actual/63c7c6a37a4ce700014e17ba.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c6a37a4ce700014e17ba.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:20:14.172Z", "updatedon": "2023-02-06T14:35:05Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r250-labortary-roundness-tester/28", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness", "linearity", "cylindricity", "conicity", "concentricity", "parallelism", "coaxiality", "thickness variation", "Labortary Roundness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ea9974337d401000144bc8f", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R100 CNC Roundness tester", "description": "R100 roundness tester, based on an ''all in one'' logic, is immediately operative with just a few operations, and allows to characterize all circular geometries, also complex ones, present on a piece.\n\nThe device is matched to Circom software that was conceived to be extremely user-friendly and easy to use, thus allowing to train an operator within a short period of time, reducing training and testing costs.\n\nThe software allows the analysis of the following geometric tolerances: roundness, planarity, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, squareness, angularity, coaxiality, run-ou, total run out, thickness variation.\n\nFor complex surfaces where gaps are present, Circom is able to eliminate them automatically or the operator can intervene manually, removing inconsistent profile sections.\n\nIntegrative packages can be added to the basic application, such as for example harmonic analysis that, through FFT algorithm, allows to analyze each single sinusoidal component of the measured profile, essential with regards to bearings.\n\nAxis of C plate: \t\nPlate diameter 160 mm\nMaximum load 200 N\nMaximum measured diameter 300 mm\nCentring and levelling: ± 3mm -- ± 2°\nRoundness error: < 0,08 μm\n\nAxis of Z column: \t\nUseful traverse lenght: 350 mm\nMotorized and measurement\nLinearity error on 400 mm: 0,8 μm\nLinearity error on 100 mm: 0,3 μm\nMeasurement speed: 0,5-1-2 mm/s\nPositioning speed: 0-15 mm/s\n\nAxis of R arm: \t\nUseful traverse lenght: 115 mm\nMotorized, positioning\nPositioning speed: 0-15 mm/s\nCalculated parameters: roundness, planarity, linearity, cylindricity, conicity, cone shape, concentricity, \nparallelism, squareness, angularity, coaxiality, run-out, total run out, thickness variation.\n\nPick-up: Two-directional with safety feature against shocks\n\nMeasurement range: 0,6 mm\nResolution: 0,001 µm\nSizes: 586 x 615 x 815 mm (L x P x H)\nWeight: 105 kg\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 20, "imageuri": "https://productimages.withfloats.com/actual/63c7ca1c59521a0001841fc1.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7ca1c59521a0001841fc1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-04-29T15:03:31.194Z", "updatedon": "2024-07-04T09:34:19Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//r100-cnc-roundness-tester/20", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness", "Concentricity", "Parallelism", "Cylindricity", "Diameter", "Perpendicularity", "Surface Metrology", "Thickness variation", "New Roundness and Cylindricity", "roundness tester", "Roundness Measuring", "roundness measurement", "Cylindricity measurement", "Straightness" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "66855670c0e30a1804aed58b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roundness n Cylindricity Measuring Machines", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nRetrofit your existing Roundness and Cylindricity Instruments with SeRound an Inhouse developed Retrofit package comprising of Electronics and Software to suit machines for various manufactures. \n\n•\tSeRound the Software Retrofit for Talyrond252 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to analyze / detect the following \n•\tParameters: Roundness,Concentricity,Relative Ecentricity, Flatness. Squareness, Coaxiality, Cylindricity, Axial Runout, Radial Runout, Face Parallelism,Straightness,Parallelism\n\nData acquisition, profile filtering, evaluation of the roundness and other parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) Arm and Column movement (Incremental / Absolute), Gauge Position and orientation has been realized by SeRound. \n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. \n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nTalyrond 252 with SeRound Analysis software Retrofit comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "Axial Runout", "Radial Runout", "Measure window", "default cycles", "Gauge Position", "same parameters", "table centering", "Column movement", "amplifier range", "measuring speed", "Data acquisition", "Face Parallelism", "other parameters", "graphical output", "Salbro Engineers", "Machine Pictures", "profile filtering", "Retrofit Packages", "existing Roundness", "instrument control", "Relative Ecentricity", "various manufactures", "PC Retrofit Roundness", "one precise instrument", "respective Manufactures", "Cylindricity Instruments", "many similar work pieces", "12 months warranty period", "Electronic Interface unit", "interactive user interface", "Cylindricity Measuring Machines", "SeRound Analysis software Retrofit" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:28.094Z", "updatedon": "2024-07-03T13:53:21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//pc-retrofit-roundness-n-cylindricity-measuring-machines/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [ "Roundness", "Flatness", "Cylindricity", "Radial Runout", "Axial Runout", "Straightness", "Concentricity", "Talyrond 252", "Retrofit", "SeRound" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685560f9bd8290644d801af", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Talysurf5_SeSurf Retrofit Package ", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nPre Owned Talysurf 5 – Retrofitted with SeSurf Ready for Immediate Dispatch\n•\tFive Traverse Speeds 0.05mm to 2.5mm per sec\n•\t120mm mechanical Datum Traverse for Skid & No Skid\n•\tMotorised Column Stand\n•\tStylus Range: 1000 um\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tFive Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm\n•\tAnalysis of Profile, Unfiltered, Roughness & Waviness\n•\tResolution: 0,01 / 0.001 & 0.0001μm \n•\tSection Remove to delete un wanted data \n•\tHard Coded User Logo, Name, Location etc\n•\tFive fields for entering Job details\n•\tSpecials: Auto Save, Excel Export with Statistical. Parameters & More\n \n \nTalysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. \n\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\n\nSeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.\n\nSeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nTalysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2.5 mm", "0.8 mm", "2CR PC", "0.25 mm", "0.08 mm", "Auto Save", "high level", "Job details", "Five fields", "26 Roughness", "Excel Export", "Stylus Range", "The Software", "Base surface", "data analysis", "easy alignment", "Owned Talysurf", "profile height", "surface texture", "other conditions", "Machine Pictures", "surface roughness", "assessment length", "3 digital filters", "Retrofit Packages", "The Manual Column", "incomplete picture", "Immediate Dispatch", "Three Filter Modes", "Pick Up Stylus tip", "Waviness parameters", "laboratory standard", "Unfiltered profiles", "Bearing Ratio curve", "cutoff wave lengths", "appropriate analysis", "accurate acquisition", "measurement accuracy", "Five Traverse Speeds", "Hard Coded User Logo", "Five Filter Cut Offs", "Motorised Column Stand", "performance reliability", "respective Manufactures", "best industry Standards", "The Talysurf5 instrument", "12 month warranty period", "SeSurf computer Interface", "minimum capital investment", "The Granite Base Tee slots", "Traditional measurement methods", "120mm mechanical Datum Traverse", "Talysurf5_SeSurf Retrofit Package", "Effective surface characterization", "complex, interrelated characteristics", "22 different Unfiltered Profile parameters" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 45, "imageuri": "https://productimages.withfloats.com/actual/5fbccf96c22f4100014b8c47.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5fbccf96c22f4100014b8c47.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:51.329Z", "updatedon": "2024-07-03T13:45:51.329Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talysurf5-sesurf-retrofit-package-/45", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685560064f7f623a8ef3983", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SeRound PC Retrofit Roundness Measuring Machine", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "8 mm", "5 rpm", "20 Kg", "0,05 μ", "0,04 μ", "250 mm", "600 μm", "500 mm", "± 0,6 mm", "Pls Note", "high level", "Other speeds", "minimum zone", "Polar filter", "unwanted data", "table surface", "Measure window", "Leveling range", "default cycles", "Rotation speed", "same parameters", "numatic bearing", "minimum squares", "amplifier range", "Centering range", "table centering", "Data acquisition", "graphical output", "Salbro Engineers", "rotating spindle", "Retrofit package", "Machine pictures", "profile filtering", "measurement chain", "Stylus resolution", "Software Retrofit", "Coaxiality Run-out", "capital investment", "instrument control", "measurement accuracy", "Proprietary products", "roundness parameters", "minimum superior plan", "maximum inferior plan", "Linear Filter cut-off", "Max work piece weight", "one precise instrument", "Spindle rotation error", "Stylus measuring range", "performance reliability", "optimal measuring speed", "Max work piece diameter", "Respective Manufacturers", "Air-bearing rotary table", "many similar work pieces", "SeRound Analysis software", "12 months warranty period", "Electronic Interface unit", "The Hommel 1000 instrument", "interactive user interface", "transmission characteristics", "maximum subscribed circumference", "minimum circumscribed circumference", "SeRound PC Retrofit Roundness Measuring Machine PC Retrofit Roundness Measuring Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.24Z", "updatedon": "2024-07-03T13:45:36.24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/seround-pc-retrofit-roundness-measuring-machine/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685548afcd2841c9c9ec3dd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 41, "imageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:22.21Z", "updatedon": "2024-07-03T13:39:22.21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//hommel-1000-seround-retrofit/41", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685515b7697320a5c5e00a6", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Profilometer PGS 200 Contour Measuring Instrument", "description": "The new profilometer PGS 200 combines the need to have a highly versatile tool, which ensures ease of installation in production environments, however, that in measuring rooms to ensure the accuracy of the measures to be always certain of the results obtained. With the concept \"all at once\" the PGS 200 with a few clicks is now operating through the Profile Studio analysis software in a short time the operator is able to measure even the most complex\n\nKey Features\n• Structure \"all in one\", no external electronics.\n• Treated alloy base that combines high rigidity and light weight.\n• Measuring range Y- 50 mm, X- 220mm\n• Measurement speed: 0.5, 1, 2 mm / sec\n• Angle measurement: up 70 °, 85 ° down.\n• CNC column position 320 mm. Ability to run automatic cycles, not in manual column\n• Autocomparazione of measurements.\n• © Windows software with aid to the operator through the Wizard to the most complex operations\n• Advanced CAD functions (tolerances, errors of form)\n\nThe new PGS 200 profilometer is a project where the goal was to create a system for the characterization of surfaces by extreme flexibility. Following this philosophy has created a machine that, thanks to the considerable size and weight reduction (inside the machine weighs just over 40 kg) allows easy installation in any environment, which may be metrology laboratory or production line.\n\nThe acquisition system is based on a 200 PGS traverse movement, through which the polar probe is kept in contact with the work piece. The system is combined with two Nano sensors guarantees result with in a working area of 50mm x 220 mm while maintaining a high level of accuracy.\n\nThe base is made of light alloy; this combination provides a significant reduction in weight while maintaining a high resistance to scratching and wear. The column positioning allows you to move the Traverse up to a height of 380mm above base.\n\nUsing the positioner mounted on the base of the instrument, the loading and unloading of the pieces are greatly simplified since the positioner can be moved along a special guide allowing you to load the piece off from work and then bringing it close with precision. With the software Profile Studio study, all the functions necessary for the characterization of the profile are easily accessible thanks to the tool bar right where every family to a different color (lines, arcs, points), this makes each function easily recognizable and accessible with a single clicks.\n\nIn the tool bar on the left of the group is represented in the measured profiles so you can easily switch from an atrium or, if desired, assist them in a multi-screen. Same bar, also consists the major functions for instrument control including the position of the axes and buttons for starting measurement and calibration position. With this interface the operator with a glance full control of the application.\n\nFor more complex procedures used is the philosophy of the Wizard or the operator is guided step by step through each elementary operations,\ngreatly simplifying the entire procedure. This type of assistance is used for example for calibration and the search for points of maximum\nand minimum during the placement of a piece.\n\nThe CAD program is the basis of highly advanced, all entities are dynamic and therefore editable after insertion. With the functions \"Best Fit\" the operator with a single click you can place a arc or a line on the profile because the program will automatically recognize the area to the\nminimum error in which include this element. Through the program you can control every movement of the tool by setting the measurement parameters for each of the measures for automated* repeated measurements, you can also set facilitating the movement of the limits in this way, the positioning during difficult measures such as inside holes and groves.\n\nThrough the \"Autocomparazione\" the program automatically rebuilds, measured on a new profile, construction and dimensional tolerances of these making a reference profile, so high speed control pieces of the same lot.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2 mm", "40 kg", "tool bar", "same lot", "Best Fit", "Same bar", "X- 220mm", "work piece", "short time", "high level", "CAD program", "polar probe", "light alloy", "new profile", "working area", "light weight", "single click", "Key Features", "minimum error", "special guide", "manual column", "high rigidity", "50mm x 220 mm", "versatile tool", "production line", "major functions", "different color", "high resistance", "Measuring range", "measuring rooms", "weight reduction", "entire procedure", "automatic cycles", "easy installation", "Angle measurement", "considerable size", "reference profile", "Measurement speed", "difficult measures", "acquisition system", "column positioning", "complex procedures", "complex operations", "© Windows software", "instrument control", "Treated alloy base", "extreme flexibility", "CNC column position", "glance full control", "calibration position", "metrology laboratory", "external electronics", "new profilometer PGS", "repeated measurements", "elementary operations", "significant reduction", "dimensional tolerances", "measurement parameters", "Advanced CAD functions", "production environments", "new PGS 200 profilometer", "200 PGS traverse movement", "high speed control pieces", "two Nano sensors guarantees", "software Profile Studio study", "Profile Studio analysis software", "Profilometer PGS 200 Contour Measuring Instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 38, "imageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:25:47.401Z", "updatedon": "2024-07-03T13:30:00Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//profilometer-pgs-200-contour-measuring-instrument/38", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "contour", "Contour Measurement", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ed122ce1902e40001dc4b6e", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Talysurf5_SeSurf Retrofit Package ", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nPre Owned Talysurf 5 – Retrofitted with SeSurf\n•\tFive Traverse Speeds 0.05mm to 2.5mm per sec\n•\t120mm mechanical Datum Traverse for Skid & No Skid\n•\tMotorised Column Stand\n•\tStylus Range: 1000 um\n•\tThree Filter Modes: Gaussian, 2CR & 2CR PC\n•\tFive Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm\n•\tAnalysis of Profile, Unfiltered, Roughness & Waviness\n•\tResolution: 0,01 / 0.001 & 0.0001μm \n•\tSection Remove to delete un wanted data \n•\tHard Coded User Logo, Name, Location etc\n•\tFive fields for entering Job details\n•\tSpecials: Auto Save, Excel Export with Statistical. Parameters & More\n \n \nTalysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. \n\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\n\nSeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.\n\nSeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nTalysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 27, "imageuri": "https://productimages.withfloats.com/actual/5ed122cfebc2290001a5f70c.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ed122cfebc2290001a5f70c.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-05-29T14:57:18.919Z", "updatedon": "2024-07-04T09:34:56Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talysurf5-sesurf-retrofit-package-/27", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [ "Talysurf5", "120mm Traverse", "Roughnesss", "Camber", "Ra", "Rt", "Rz", "Retrofit", "Retrofitted machines", "Retrofit Pakage", "SeSurf Retrofit Package", "On Sale", "Surface Roughness", "Roughness Tester", "Roughness Measurement" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ea99540692c710001379c36", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 19, "imageuri": "https://productimages.withfloats.com/actual/5ed10614ebc2290001a5f282.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ed10614ebc2290001a5f282.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-04-29T14:54:56.844Z", "updatedon": "2024-07-03T14:00:39Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/hommel-1000-seround-retrofit/19", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [ "Surface Metrology", "roundness", "Harmonics", "Flatness", "Relative Eccentricity", "Harmonics", "Linear Graph", "squareness", "Digital filters", "Gaussian Filter", "2CR filter", "FFT algorithum", "LSC", "MIC", "MCC", "MZC", "Calibration" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }