Home> Products> single portable instrument

{ "products": [ { "_id": "6210ca3f6cf79500017ec1d7", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "WARPsurf ", "description": "The WARPsurf is a turning point in the world panorama of the instruments for surface analysis, because it gives in a single portable instrument the capability to perform both roughness and profilometry analysis.\n\nThe brilliant 7’’ touch screen display, combined with modern user interface, allows the user to become quickly familiar with the instrument, setting easily the measure parameters, positioning on the piece and performing the analysis.\n\nThe instrument is equipped with a 1GHz microprocessor that allows to have a fluid system and fast processing even with complex profiles.\n\nExtremely compact and handy, the WARPsurf allows to position easily on big pieces thanks to the integrated micrometric that covers 110 mm range.\n\nThanks to the standard USB interface, it is possible to plug a regular USB drive to save images or PDF reports; using this interface the instrument can connect to a common desktop printer and directly print on A4.\n\nThe instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.\n\nFEATURES:\nMeasurement range : ±1500μm\nResolution : 0,0001 µm - (0,1nm)\nCut-off lenght : 0,08 - 0,25 - 0,8 - 2,5 - 8 mm\nCut-off number : Selectable from 1 to 20 (1 to 6 for 8 mm cut-off)\nTraverse lenght : Up to 60 mm\nPick up \tInductive, it can be rotated of 90' for lateral measurements and interchangeable styluses\n\nMeasurement parameters \t81 roughness parameters\nRa, Rq, Rt, Rz, Rp, Rv, Rc, Rsk, Rku, RSm, RΔq, RΔa, Rmax, Rδc, Rmr, Rmr(c), RPc, RLo, Rlr, Rzjis, RHSC, R3z, hp, Ep\nPa, Pq, Pt, Pq, Pv, Pc, Psk, Pku, PSm, PΔq, Pδc, PPc, PLo, Plr, PHSC\nWa, Wq, Wt, Wz, Wp, Wv, Wc, Wsk, Wku, WSm, WΔq, Wδc, WPc, WLo, Wlr, WHSC\nRk, Rpk, Rvk, Mr1, Mr2, A1, A2, Rpk*, Rvk*, WDSm, WDc, WDt\nR, AR, Rx, W, Aw, Wx, Wte, Rke, Rpke, Rvke, Mr1e, Mr2e, A1e, A2e\n\nAvailable charts: Roughness, Waviness, Dominant waviness, Primary, Material ratio curve (bearing) and height amplitude distribution (density).\nUnit of measurement : Millimeters and inches\nUser interface : Color display touchscreen TFT, 7 inches, 3 impermeable membrane switches\nLanguages: Italian, French, Inglese, German, Spanish, Portuguese, Japanese, Chinese, Korean\nMemory \tUp to 4000 measurements for roughness – Up to 1000 for profilometry\nCAD : Functions to process the integrated profile,\nPoints: carthesian – on the profile – intersection – limit – maximum - minimum\nLines: best-fit – polar – interrupted - between two or more points – parallel\nArcs: best-fit – interrupted - between three or more points – center and radius – tangent\nDimensions: Aligned – Vertical – Horizontal – Radius – Angle – Line-point distance\nAdvanced: Axis alignment – Z magnification\nVisualization: Pan – Zoom\nPrinting : 1- Capability to print on a common USB desktop printer in A4 format (Example: HP deskjet)\n2- Capability to print to PDF on a USB drive\n3- Printing on a PR11 device using Bluetooth connection\nEquipment : WARPsurf roughness tester with SB300 magnetic probe and stylus 1-Y roughness, battery charger 110-230V, roughness specimen, plastic case, user manual\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "A4.", "images", "capability", "big pieces", "instruments", "PDF reports", "110 mm range", "fluid system", "The WARPsurf", "turning point", "world panorama", "fast processing", "surface features", "surface analysis", "complex profiles", "dimensional ones", "regular USB drive", "measure parameters", "1GHz microprocessor", "WARPsurf SM Product", "profilometry analysis", "modern user interface", "standard USB interface", "integrated micrometric", "common desktop printer", "interchangeable styluses", "Portable Roughness Tester", "single portable instrument", "brilliant 7’’ touch screen display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/63c7bea07a4ce700014e0efa.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7bea07a4ce700014e0efa.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:45:19.62Z", "updatedon": "2024-07-05T10:55:55Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/warpsurf-/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "surface analysis", "WARPsurf", "roughness parameters", "Roughness", "Waviness", "Dominant waviness", "Material ratio curve (bearing)", "height amplitude distribution", "Ra", "Surface Roughness", "Surface Metrology", "Roughness Tester", "roughness average", "Roughness" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6686792aa432c82118617675", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Roundness & Cylindricity Tester RMI-D560C", "description": "Roundness Measuring Instrument RMI-D560C\n\nTechnical specifications:\n\nRotary Table\nBearing Type:- Gas bearing\nRotation accuracy:(0.025+6H/10000)μm\nRotating speed:- 4,6,8,10rpm\nAdjust table: diameter:- 180mm\nTable loading capacity:- 25kg\nRotation diameter:- 560mm\nMax measure diameter:- 280mm\n\nColumn (Z-axis )\n\nColumn transverse travel:- 320mm (electric)\nMax detection depth:- 100mm (min inner diameter) : 30mm)\nColumn straightness:- 0.3μm /100mm\n\nHorizontal arm (X-axis)\nHorizontal movement:- 165mm (electric)\nProtrusion amount:- 25mm\n\nDetector\nAcquisition device:- Circle grating\nCircumference of sampling:- 14400 points\nSensor type:- Inductive Sensor\nSensor range :- ±300μm\nSensor resolution:- 0.001μm\nX raster:- RENISHAW grating scale 0.5um\nZ raster:- RENISHAW grating scale 0.5um\n\n*The above machine specifications can be customized and upgraded according to demand\n\nTechnical features\n1) The machine reference table and Z-axis column material are made of natural granite, the structure is not deformed, and the performance is more stable and reliable.\n2) The rotating spindle adopts a frictionless air-floating spindle, the accuracy is kept longer, and the\nrotation speed is stable\n3) The use of X-direction and Z-direction high-precision grating sensors improves the degree of\nautomation and realizes the measurement function that the sensors can automatically contact.\n4) The key components adopt special stress-relief alloy materials and special stress-relief treatment process, and the durability and accuracy are kept longer.\n\nCylindricity Introduction\nCylindricity measuring instrument is benchmark against precision rotary center and linear motion\nguide,the quantitative evaluation of the cylindricity is made by measuring the radius variation of\nactual contour of several cylindricity surface in different angle position to rotary center by\ndisplacement sensor in the guide. It is used to measure the error of contour shape of cylindricity workpiece (Roundness, cylindricity, planeness, straightness),position error (concentricity, coaxiality, run-out and perpendicularity)\n\nMeasurement Capability:\nEvaluation item: Cylindricity module: Radial full jump, concentricity, taper, radius\nRoundness module: Concentricity, radial single jump, wall thickness difference\nStraightness module: Parallelism, verticality\nSingle section flatness module: Axial single jump, verticality and parallelism\nMulti-section flatness module: parallelism, Axial full jump, verticality\nCommutator module: Single contacts jump, Adjacent contacts jump, intermittent difference of contacts.\n\nReference standard for cylindricity evaluation: LSCY、 MZCY、 MICY、 MCCY、 OSCY\n\nSoftware functions\n1) The software supports Chinese, English, and supports XP, win7, win8, win10 systems\n2) The standard report has various evaluation methods, and the parameters in the test report can be\nadded and deleted as needed.\n3) With commutator module, it can evaluate single-chip true circle, adjacent segment difference and\ngroove segment difference, and the measurement result can be deleted automatically or manually.\n4) Software can assist the rotating spindle to adjust the center and level, improve efficiency and save\ntime\n5) Measurement results can choose ISO statistical report or ISO standard report\n6) Can perform spectrum analysis on contour graphics\n7) Flatness measurement depending on the model can support single-section measurement (D420)\nor 2 to 15 multi-section measurements (D560C)\n8) In multi-section measurement, you can call, delete, and add to each section separately, and you\ncan choose 2 sections at will defined as the reference of the workpiece, performing 2 combined operations not only avoids repeated measurements, but also improves the measurement efficiency.\n9) Cylindricity is calculated by multiple axes, and each axis is corrected by software to minimize the error between the axis systems (D560C)\n10) 3D graphics display, and the graphics can be rotated, beautiful and easy to read. And observe the\noverall contour of the workpiece through relative zoom.\n11) The software is programmable, automatic measurement, and the original measurement data is\nautomatically saved.\n\n\nDevice Configuration\n\nMain Machine\n\nBasic Workbench:- Natural granite\nHigh-precision air float spindle:- \nRotation accuracy\n(0.025+6H/10000)μm\nColumn system:- Natural granite\nHorizontal system:- Steel structure\nPrecision alignment and leveling table 1 Alignment: ±3mm Leveling: ±2°\n\nFor Complete catalog kindly request it from Us", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "X raster", "2 sections", "test report", "Sensor type", "Gas bearing", "14400 points", "3mm Leveling", "axis systems", "Sensor range", "280mm Column", "Adjust table", "relative zoom", "multiple axes", "win10 systems", "contour shape", "25mm Detector", "Column system", "position error", "actual contour", "key components", "Horizontal arm", "Rotating speed", "rotation speed", "0.5um Z raster", "Steel structure", "overall contour", "natural granite", "Evaluation item", "Axial full jump", "Complete catalog", "contour graphics", "Inductive Sensor", "rotating spindle", "Radial full jump", "Rotation accuracy", "Horizontal system", "spectrum analysis", "Sensor resolution", "Protrusion amount", "Commutator module", "table 1 Alignment", "Axial single jump", "Software functions", "Technical features", "measurement result", "Reference standard", "Acquisition device", "min inner diameter", "radial single jump", "displacement sensor", "Horizontal movement", "Column straightness", "Straightness module", "Precision alignment", "Cylindricity module", "ISO standard report", "linear motion guide", "Max detection depth", "measurement function", "Flatness measurement", "Max measure diameter", "Single contacts jump", "2 combined operations", "automatic measurement", "repeated measurements", "measurement efficiency", "cylindricity workpiece", "Measurement Capability", "machine specifications", "Z-axis column material", "25kg Rotation diameter", "Adjacent contacts jump", "ISO statistical report", "quantitative evaluation", "cylindricity evaluation", "intermittent difference", "radius Roundness module", "10) 3D graphics display", "precision rotary center", "machine reference table", "single-chip true circle", "Technical specifications", "Column transverse travel", "different angle position", "Cylindricity Introduction", "original measurement data", "groove segment difference", "wall thickness difference", "Rotary Table Bearing Type", "single-section measurement", "various evaluation methods", "adjacent segment difference", "several cylindricity surface", "Circle grating Circumference", "180mm Table loading capacity", "Multi-section flatness module", "Single section flatness module", "High-precision air float spindle", "frictionless air-floating spindle", "Cylindricity measuring instrument", "2 to 15 multi-section measurements", "special stress-relief alloy materials", "special stress-relief treatment process", "Z-direction high-precision grating sensors", "Device Configuration Main Machine Basic Workbench", "Cylindricity Tester RMI-D560C Roundness Measuring Instrument RMI-D560C" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 53, "imageuri": "https://bizimages.withfloats.com/actual/90a95825107047e5a4e16694249cf44a.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/90a95825107047e5a4e16694249cf44a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-04T10:27:54.338Z", "updatedon": "2024-07-04T10:27:54.338Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//roundness-cylindricity-tester-rmi-d560c/53", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Roundness Tester", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "66855489bb6dd81a38b9b1d4", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT-10 Plus", "description": "Palmtop Roughness Tester RT-10 Plus\n\n•\tTechnical specification\n•\tRoughness parameters according to ISO 4287: Ra, Rq, Rt, Rz, Rc, RSm, Rmr & Rmax Special.\n•\t4 roughness parameters according to ISO 12085: Pt, R, AR, Rx. Measuring length: up to 16 mm.\n•\tMeasurement range: ±20 µm and ±80 µm.\n•\tCut-off lengths: 0.25 – 0.8 – 2.5 mm.\n•\tGaussian filter according to ISO 11562.\n•\tDisplay: 16-character, 2-line LCD.\n•\tTouch keyboard of 4 keys.\n•\tRechargeable battery incorporated.\n•\tMulti language: Italian, French, English, German and Spanish.\n•\tBuffer of 30 measurements.\n•\tSerial data output.\n•\tGauge rotable through 90° for lateral measurements.\n•\tResolution 0.01 µm and 0.04 µm.\nThe portable, palmtop roughness tester RT-10 permits evaluation of the most varied roughness parameters directly on the site of production offering, in a compact package, the advantages of being easy to carry, simple to use and reliability of measurement.\n\nDesigned for use on the shop floor, it is shielded against external agents by a special protective membrane. It can measure in difficult positions, including when held in the hand, in the vertical traverse position. The gauge may be turned by 90° to permit measurements in grooves or between shoulders. The 400x250 mm measurement support in black granite with adjustable steel column can be used with RT-10 to measure pieces that are bulky or difficult to position.\n\nComplete Presentation of Results\n\nThis instrument can be connected to the PR-10, a 24-column printer providing certification both of the parameters measured, together with indication of the tolerances, and of the profile drawing. Using the serial output line, data can be downloaded to a Personal Computer running the Remote-10 program under Windows 98/ME/NT4/2K, XP with which measurements can be made, data processed, parameters displayed and drawings of the profile presented using various options. It has a buffer of 30 measurements which can be displayed and printed at any time. The most common functions, such as recalling results, or cut-offs and starting measurements, can be accessed directly using the keyboard, while others are available by activating suitable, easy to comprehend menus. Among other things, these menus permit the presetting of tolerance thresholds which, when linked to one of the measurable parameters, facilitate series checks.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "±80 µ", "16 mm", "0.04 µ", "4 keys", "±20 µm", "2.5 mm", "ISO 4287", "ISO 12085", "RT-10 Plus", "shop floor", "2-line LCD", "other things", "Rmax Special", "series checks", "black granite", "Touch keyboard", "suitable, easy", "Multi language", "30 measurements", "profile drawing", "various options", "external agents", "compact package", "Gaussian filter", "Cut-off lengths", "common functions", "Measuring length", "Remote-10 program", "Personal Computer", "24-column printer", "Measurement range", "Serial data output", "serial output line", "difficult positions", "production offering", "lateral measurements", "tolerance thresholds", "Rechargeable battery", "measurable parameters", "Complete Presentation", "4 roughness parameters", "Technical specification", "adjustable steel column", "vertical traverse position", "varied roughness parameters", "special protective membrane", "400x250 mm measurement support", "portable, palmtop roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/5f7b1ba199d7e200019867cd.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1ba199d7e200019867cd.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:21.626Z", "updatedon": "2024-07-03T13:55:42Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//rt-10-plus/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Surface Roughness Tester", "tags": [ "Portable Roughness", "Roughness", "Surface Roughness", "Surface Metrology", "Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685515b7697320a5c5e00a6", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Profilometer PGS 200 Contour Measuring Instrument", "description": "The new profilometer PGS 200 combines the need to have a highly versatile tool, which ensures ease of installation in production environments, however, that in measuring rooms to ensure the accuracy of the measures to be always certain of the results obtained. With the concept \"all at once\" the PGS 200 with a few clicks is now operating through the Profile Studio analysis software in a short time the operator is able to measure even the most complex\n\nKey Features\n• Structure \"all in one\", no external electronics.\n• Treated alloy base that combines high rigidity and light weight.\n• Measuring range Y- 50 mm, X- 220mm\n• Measurement speed: 0.5, 1, 2 mm / sec\n• Angle measurement: up 70 °, 85 ° down.\n• CNC column position 320 mm. Ability to run automatic cycles, not in manual column\n• Autocomparazione of measurements.\n• © Windows software with aid to the operator through the Wizard to the most complex operations\n• Advanced CAD functions (tolerances, errors of form)\n\nThe new PGS 200 profilometer is a project where the goal was to create a system for the characterization of surfaces by extreme flexibility. Following this philosophy has created a machine that, thanks to the considerable size and weight reduction (inside the machine weighs just over 40 kg) allows easy installation in any environment, which may be metrology laboratory or production line.\n\nThe acquisition system is based on a 200 PGS traverse movement, through which the polar probe is kept in contact with the work piece. The system is combined with two Nano sensors guarantees result with in a working area of 50mm x 220 mm while maintaining a high level of accuracy.\n\nThe base is made of light alloy; this combination provides a significant reduction in weight while maintaining a high resistance to scratching and wear. The column positioning allows you to move the Traverse up to a height of 380mm above base.\n\nUsing the positioner mounted on the base of the instrument, the loading and unloading of the pieces are greatly simplified since the positioner can be moved along a special guide allowing you to load the piece off from work and then bringing it close with precision. With the software Profile Studio study, all the functions necessary for the characterization of the profile are easily accessible thanks to the tool bar right where every family to a different color (lines, arcs, points), this makes each function easily recognizable and accessible with a single clicks.\n\nIn the tool bar on the left of the group is represented in the measured profiles so you can easily switch from an atrium or, if desired, assist them in a multi-screen. Same bar, also consists the major functions for instrument control including the position of the axes and buttons for starting measurement and calibration position. With this interface the operator with a glance full control of the application.\n\nFor more complex procedures used is the philosophy of the Wizard or the operator is guided step by step through each elementary operations,\ngreatly simplifying the entire procedure. This type of assistance is used for example for calibration and the search for points of maximum\nand minimum during the placement of a piece.\n\nThe CAD program is the basis of highly advanced, all entities are dynamic and therefore editable after insertion. With the functions \"Best Fit\" the operator with a single click you can place a arc or a line on the profile because the program will automatically recognize the area to the\nminimum error in which include this element. Through the program you can control every movement of the tool by setting the measurement parameters for each of the measures for automated* repeated measurements, you can also set facilitating the movement of the limits in this way, the positioning during difficult measures such as inside holes and groves.\n\nThrough the \"Autocomparazione\" the program automatically rebuilds, measured on a new profile, construction and dimensional tolerances of these making a reference profile, so high speed control pieces of the same lot.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2 mm", "40 kg", "tool bar", "same lot", "Best Fit", "Same bar", "X- 220mm", "work piece", "short time", "high level", "CAD program", "polar probe", "light alloy", "new profile", "working area", "light weight", "single click", "Key Features", "minimum error", "special guide", "manual column", "high rigidity", "50mm x 220 mm", "versatile tool", "production line", "major functions", "different color", "high resistance", "Measuring range", "measuring rooms", "weight reduction", "entire procedure", "automatic cycles", "easy installation", "Angle measurement", "considerable size", "reference profile", "Measurement speed", "difficult measures", "acquisition system", "column positioning", "complex procedures", "complex operations", "© Windows software", "instrument control", "Treated alloy base", "extreme flexibility", "CNC column position", "glance full control", "calibration position", "metrology laboratory", "external electronics", "new profilometer PGS", "repeated measurements", "elementary operations", "significant reduction", "dimensional tolerances", "measurement parameters", "Advanced CAD functions", "production environments", "new PGS 200 profilometer", "200 PGS traverse movement", "high speed control pieces", "two Nano sensors guarantees", "software Profile Studio study", "Profile Studio analysis software", "Profilometer PGS 200 Contour Measuring Instrument" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 38, "imageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1dc999d7e200019867fb.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:25:47.401Z", "updatedon": "2024-07-03T13:30:00Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//profilometer-pgs-200-contour-measuring-instrument/38", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Contour Profilometer", "tags": [ "contour", "Contour Measurement", "Profile Studio software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "668550ac4efde106e890d658", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Roundness Tester RMI-D420", "description": "Roundness Introduction\n\nRoundness measuring instrument is benchmark against precision rotary center, the quantitative evaluation of the cross-section roundness is made by measuring the radius varitation of actual contour of workpiece in different angle position to rotary center by sensor. It is used to measure the cross-section roundness and coaxiality of internal rotation and external rotation and face runout, etc.\n\nMeasurement Capability\n\nEvaluation item: Roundness, concentricity, coaxiality, parallelism, perpendicularity, flatness,Single radial runout, Single axial runout\n\nAnalytical ability: Spectrum analysis, gap/burr automatically removed, waveform analysis.\n\nRoundness evaluation (4 methods): Minimum zone method (MZC), least square (LSC), minimum circum circle (MCC) and maximum inscribed circle (MIC).\n\nRoundness filtering gear: 1-15upr,1-50upr,1-150upr,1-250upr,1-500upr,15-100upr,15-500upr,2-15upr\n\nFiltering expression: Gaussian (ISO standard) Magnification: input range 1-100000\n\nRoundness Measuring Instrument RMI-D420\n\nTechnical specifications: \nRotary table \nBearing Type : Gas bearing\nRotation accuracy:(0.025+6H/10000)um\nRotating speed: 6rpm\nAdjust table diameter : 180mm\nTable loading capacity : 15kg\nRotation diameter : 420mm\nMax measure diameter : 250mm\n\nColumn (Z-axis )\nColumn transverse travel : 320mm (electric)\nMax detection depth : 100mm (min inner diameter): 30mm)\n\nHorizontal arm (X-axis) \nHorizontal movement : 150mm (manual)\nProtrusion amount : 25mm\n\nDetector\nAcquisition device : Circle grating sensor\nCircumference of sampling points : 4096 points\nSensor type : Inductive Sensor\nSensor range : ±300μm\nSensor resolution : 0.001μm\n\n*The above machine specifications can be customized and upgraded according to demand\n\nSoftware functions\n1) The software supports Chinese, English, and supports XP, win7, win8, win10 operating systems.\n2) The standard report has various evaluation methods, and the parameters in the test report can be\nadded and deleted as needed.\n3) With commutator module, it can evaluate single-chip true circle, adjacent segment difference and\ngroove segment difference, and the measurement result can be deleted automatically or manually.\n4) Software can assist the rotating spindle to adjust the center and level, improve efficiency and save\ntime\n5) Measurement results can choose ISO statistical report or ISO standard report.\n6) Can perform spectrum analysis on contour graphics.\n\nFor complete Catalogue, Contact Us.\n\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "4096 points", "input range", "test report", "Sensor type", "Gas bearing", "face runout", "Sensor range", "250mm Column", "25mm Detector", "Horizontal arm", "Rotating speed", "actual contour", "inner diameter", "sampling points", "Evaluation item", "contour graphics", "rotating spindle", "Inductive Sensor", "commutator module", "Sensor resolution", "Protrusion amount", "waveform analysis", "Spectrum analysis", "radius varitation", "Rotation accuracy", "external rotation", "internal rotation", "Software functions", "complete Catalogue", "measurement result", "Acquisition device", "Horizontal movement", "ISO standard report", "Max detection depth", "Minimum zone method", "Filtering expression", "Roundness evaluation", "Max measure diameter", "Single radial runout", "Circle grating sensor", "minimum circum circle", "Adjust table diameter", "machine specifications", "Measurement Capability", "15kg Rotation diameter", "ISO statistical report", "quantitative evaluation", "cross-section roundness", "precision rotary center", "single-chip true circle", "win10 operating systems", "Technical specifications", "Column transverse travel", "Roundness filtering gear", "maximum inscribed circle", "different angle position", "groove segment difference", "Rotary table Bearing Type", "various evaluation methods", "ISO standard) Magnification", "adjacent segment difference", "180mm Table loading capacity", "Single axial runout Analytical ability", "Roundness Measuring Instrument RMI-D420", "Roundness Tester RMI-D420 Roundness Introduction" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 37, "imageuri": "https://bizimages.withfloats.com/actual/30ac70ad9c6f423e9b095082b0972f96.jpg", "tileimageuri": "https://bizimages.withfloats.com/actual/30ac70ad9c6f423e9b095082b0972f96.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:22:52.255Z", "updatedon": "2024-07-03T13:22:52.255Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/roundness-tester-rmi-d420/37", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Roundness Tester", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6446742e82c0230001a5d489", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "TALYROND 252 Roundness Tester Retrofit", "description": "Note*-Machines displayed are Products/property of respective Manufactures. Machine Pictures used are to state compatibility of our Retrofit Package only.\n\nSeRound the Software Retrofit is user friendly, powerful and is performance driven. It is developed in-House at Salbro Engineers and has under gone years of field tests. It provides a through interactive user interface between the user and the Instrument. All Integrated to make one precise instrument to detect and assess the following results in Roundness, Concentricity, Eccentricity, Flatness (rotating 3D profile display), Cylindricity, Straightness, Parallelism, Squareness, Coaxiality and Radial Run-out, Axial Out, Harmonics.\n\nSeRound is proficient in Data acquisition, profile filtering, and assessment of the roundness parameters and graphical presentation of the results. It also performs instrument control. SeRound’s Setup and Measure window assists the user in accurately centering and leveling the job thus saving on time and improving productivity. The measuring process is initiated by the user by a mere click of a button and displaces measure completed’ massage at the end of measuring sequence. SeRound offers options to choose the method of calculation and assessment. Roundness and Flatness assessments are carried out on 4 internationally recognized reference circles (LSC, MIC, MCC and MZC). MZ Cylinder for Cylindricity analysis, LSL and MZ Lines for Straightness analysis., Operator is able to omit unwanted data and carry out analysis with remaining data. Measured data can be saved, retrieved and re-analyzed to any of the available conditions as desired by the user.\n\nA. MESUREMENT CAPACITY\n\n1. Maximum diameter : 350 mm (13.8 in) optionally(also see Para 9) \nextendable to 500 mm (19.7 in)2. Maximum Weight : 20 kg (44.1 lb)3. Maximum Height of assessable Surface : 300mm (11.8 in)4. Worktable Moment Loading : 120 kgmm (10.4 lbin)5. Maximum Eccentricity : 25mm (0.98in) along the load line\n\nB. WORKTABLE AND SPINDLE\n1. Worktable Diameter :190mm (7.5 in)2. Speed of Rotation : 6 rpm nominal, clockwise3. Range of Centering Nominal : ±1mm (±0.04in)4. Range of Leveling Nominal : ±4.1 mrad (±14 arc minutes)5. Height of neutral plane above Worktable : 20mm (0.79in)6. Roundness Limit of Error : Concentric Load 20kg (44.1 lb)(Departure from the least within 0.06 µm 0.0003µm/mmSquares circle at 6 rpm with height above worktable 0-50 u.p.r filter) (1.5 µin 0.3 µin/in)*7. Axial Error : 0.15µm (3.9 µin) maximum axial movement of worktable during one revolution.\n*These departures may be inwards and outwards\n\nC. VERTICAL STRAIGHTNESS UNIT\n1. Measurement Length : 300 mm (11.8in),2. Accuracy of stop Measurement : 0.5mm (0.02in)3. Speed of Traverse (for set-up) : (1) Joystick slow speed0-3mm/s (0-0.12 in/s) for approx 70% of joystick travel. (2) Computer controlled <3 mm/sec variable.4. Straightness limit of Error : In the measuring plane: (Minimum zone straightness at 1µm over 300 mm (40µin 1mm/sec (0.04 in/sec) with over 11.8in) 8.0mm (0.3in) cut off low pass filter5. Positional Control Uncertainty : ±100µm (±0.004in) for one single move.6. Internal Capacity : 150mm (5.9in) For Straightness Limiting conditions, Maximum length of continuous Minimum diameter clearance Internal surface that can be assessed 115mm (4.5in) depth in bores larger thanØ25mm (Ø1in)7. For Roundness assessment Internal bore penetration : 150mm (5.9in), 115mm depth in bore of Ø25mm\n***Internal penetration for other than ‘limiting condition’ depends on component geometry.\n\nD. RADIAL STRAIGHTNESS UNIT1. Traverse Length : 200mm (7.9in) This may be set for up to 50mm (1.97in) of travel past the spindle axis. Standard setting is 25mm past the spindle axis.2. Speed of Traverse : up to 2mm/sec3. Positional control uncertainty : ±50µm (±0.002in) for one single move.This is for both relative and absolute movements.\n\nE. GAUGE1. Standard Stylus Arm Length : 75mm (2.95”) effective length2. Range of Gauge movement with80mm Stylus Arm : 1.2mm (0.079in) Nominal F. ELECTRICAL SUPPLY\n\nMain Instrument Overall Weight : 279kg (615lbs)\nOverall Length : 760mm (29.9in)\nOverall Width : 760mm (29.9in)\nOverall Height : 1513mm (59.6in)\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "LSL", "MCC", "MIC", "LSC", "job", "end", "MZC", "time", "Note", "Setup", "years", "House", "button", "method", "options", "SeRound", "Machines", "Products", "property", "MZ Lines", "Harmonics", "Squareness", "Coaxiality", "mere click", "Radial Run", "MZ Cylinder", "calculation", "field tests", "Parallelism", "performance", "productivity", "Eccentricity", "compatibility", "Concentricity", "Measured data", "unwanted data", "remaining data", "Measure window", "Retrofit Package", "Data acquisition", "Machine Pictures", "Salbro Engineers", "following results", "measuring process", "profile filtering", "Software Retrofit", "measuring sequence", "instrument control", "Flatness assessments", "roundness parameters", "available conditions", "Cylindricity analysis", "Straightness analysis", "graphical presentation", "one precise instrument", "respective Manufactures", "interactive user interface", "rotating 3D profile display", "TALYROND 252 Roundness Tester Retrofit", "4 internationally recognized reference circles" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 44, "imageuri": "https://productimages.withfloats.com/actual/644674336e06d800016fc260.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/644674336e06d800016fc260.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-04-24T12:21:02.447Z", "updatedon": "2024-07-03T13:28:44Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/talyrond-252-roundness-tester-retrofit/44", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Roundness Tester Retrofit", "tags": [ "Roundness Teste Retrofit Package", "Laboratary Roundness Tester", "Upgraded Software", "roundness", "Straightness", "Cylindricity", "Parallelism", "Flatness", "Relative Eccentricity", "eccentricity", "squareness", "Velocity Analysis", "Harmonics", "Axial Runout", "Radial Runout" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63c7f5df722f5e0001c0af0b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT10G Palmtop graphic roughness tester", "description": "RT10G roughness tester was born from the success obtained by RT10; easy to handle and reliable like the basic version, it also carries out advanced analyses typical of a laboratory instrument.\n\nIn addition to 31 roughness parameters calculated, RT10G displays the graphs of the roughness profile, primary profile, bearing capacity curves, distribution of ordinates, and allows to set tolerances on single parameters and personalize prints. RT10G uses new generation electronics with 0.001 µm resolution that ensure always reliable results and displays them in a user-friendly fashion, thanks to the internal icon menus taken from modern Smartphones.\n\nCHARACTERISTICS:\nMeasurement range: ±300μm\nResolution: 0,001 μm\nCut-off Lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 16 mm\nPick-up: \tInductive, it can be rotated of 90° for lateral measurements (with SB50 probe)\nMeasurement parameters: 31 parameters \n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsm, Rdc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, RPc, PPc – Rk, Rpk, Pvk, Mr1, Mr2 – Pt, R, Rx, AR-R3, R3zm, Rmax)\nGraphs displayed: Roughness, primary, bearing capacity curve, and distribution of ordinates\nUnit of measurement: Millimetres and inches\nInterface: \tTFT, 2’’ colour graphic display and 4 lateral waterproof membrane buttons\nLanguages: Italian, French, English, German, Spanish and Portuguese\nMemory: Up to 1000 measurements\nAccessories: RT10G roughness tester, 110-230V battery charger, adjusting walls, 8 mm diameter end plug for connection to stand, roughness sample, Case, User Manual.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 41, "imageuri": "https://productimages.withfloats.com/actual/63c7ff0cf7454c00013b50b7.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7ff0cf7454c00013b50b7.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-18T13:36:31.508Z", "updatedon": "2024-07-05T10:58:24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt10g-palmtop-graphic-roughness-tester/41", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Surface Roughness", "Roughnesss", "Roughness Tester", "Portable Roughness", "Roughness Parameteres" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210dfef6cf79500017ec298", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "LITEsurf Palmtop Roughness", "description": "The new LITEsurf roughness tester was born from the forty-year experience that SM has in measuring and designing roughness tester for production areas. This is why we know well what are the characteristics that are really necessary for an instrument of this family that has to go to work there right with you: compactness, robustness, ease of use and clarity of the results, these are the characteristics that they will make LITEsurf the ideal partner for roughness characterizing on your parts. Are you considering buying a new palmtop roughness tester? We accept the challenge, because we are sure that the new LITEsurf roughness tester is a step forward compared to the other opponents! Are you not convinced? We give you 5 good reasons!\n\nConnectivity: Today technology allows us to share information quickly and easily, can your new roughness tester do it? The new LITEsurf, thanks to the integrated Bluetooth and USB connection, allows you to connect the smartphones, tablets and PCs in an intuitive and fast way, then sharing information with the rest of the world.\n\nFlexibility: you want, with a single instrument, to measure zones horizontally, vertically, up / down or sideways, many will answer you impossible, but LITEsurf can do all this. Through the probe rotatable laterally by 90 ° and to the balanced and preloaded sensor, each area of the piece can be measured.\n\nRobustness: A robust palmtop roughness tester with few plastic and a lot of metal? Difficult to find on the market you will think. But is not so! The LITEsurf has a light alloy body machined from solid combined with a PC / ABS body that guarantee high rigidity with high impact resistance. The tool that is not afraid of the bumps and accidental falls inevitable in normal use in production.\n\nReporting: Do you need to generate customized reports with company logo, description, notes and even a photo of the measured detail and save them in a standard format such as in PDF or Excel for easy sharing and archiving? Many will offer you additional paid software and perhaps not so flexible; LITEsurf by connecting to an external device such as your Smartphone or tablet on which the free \"Roughness studio base\" APP is installed, can do all this with ease.\n\nBattery life: How often are battery-powered devices discharged just when they are needed? We as you know it well, for this reason a sophisticated charge management system has been integrated into the LITEsurf which performs a full charge in 50 minutes, guaranteeing 10 hours of work and at least 300 roughness measurements. Don't you have this time? Just give us 3 minutes of charge and we guarantee you to perform at least 20 measurements.\n\nThe LITEsurf is charged via the same cable and charger that you use to charge your Smartphone or Tablet (USB type C), a nice simplification!\n\nThe instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.\n\nFEATURES:\nMeasurement range: 250 um (+ 50 um -200 um)\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 17,5 mm\nPick up: Optical, it can be rotated of 90° for lateral measurements\nMeasurement parameters: 81 roughness parameters\n8 Parameters ISO: Ra, Rq, Rt, Rz, Rc, Rmax, RSm, RPc,\nMOTIF: Pt, R, AR, Rx, Ppc\nUnit of measurement: Millimeters and inches\nInterface: OLED graphic display and 3 waterproof membrane buttons\nLanguages:Italian, French, English, German, Spanish, Portuguese\nMemory: Up to 18000 measurements with only parameters Up to 30 measurements with graph\nAccessories: LITEsurf roughness tester, USB battery charger, USB cable, 8 mm diameter end-plug for connection to stand, roughness sample, plastic case, User Manual\n\nSalbro Engineers are the authorized dealers for LITEsurf in India ", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "PCs", "use", "90 °", "rest", "ease", "probe", "zones", "world", "Today", "parts", "piece", "family", "tablets", "results", "clarity", "balanced", "fast way", "Bluetooth", "challenge", "intuitive", "integrated", "robustness", "technology", "smartphones", "information", "Flexibility", "compactness", "Connectivity", "ideal partner", "5 good reasons", "USB connection", "other opponents", "characteristics", "preloaded sensor", "production areas", "single instrument", "LITEsurf SM Product", "new roughness tester", "forty-year experience", "LITEsurf Palmtop Roughness", "new palmtop roughness tester", "new LITEsurf roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 34, "imageuri": "https://productimages.withfloats.com/actual/63c7b5da59521a000183ffc0.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7b5da59521a000183ffc0.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T12:17:51.518Z", "updatedon": "2024-07-05T10:51:01Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//litesurf-palmtop-roughness/34", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Roughnesss", "Surface Roughness", "Palmtop Roughness", "Ra", "Surface Metrology", "Roughness Tester", "surface analysis", "Rz", "Roughness Tester", "Portable Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210c45e0f41fd000113694d", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R250 Labortary Roundness Tester", "description": "R250 roundness tester was conceived from the need to characterize pieces with circular and even complex geometries with utmost accuracy, and it is the ideal instrument to satisfy multiple measurement needs in the mechanical, motor, aerospace and machine manufacturing industries.\nThanks to its solid structure consisting of a base made in diabase and pneumostatically supported plate, it can accurately measure pieces of also considerable weight.\nThe device is matched to Circom software that was conceived to be extremely user-friendly and easy to use, thus allowing to train an operator within a short period of time, reducing training and testing costs.\nThe software allows to analyze the following geometric tolerances: roundness, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, coaxiality, run out, total run out, thickness variation. For complex surfaces where gaps are present, Circom is able to eliminate them automatically or the operator can intervene manually, removing inconsistent profile sections.\nIntegrative packages can be added to the basic application, such as for example harmonic analysis that, through FFT algorithm, allows to analyze each single sinusoidal component of the measured profile, essential with regards to bearings.\n\nCHARACTERISTICS:\n\nPneumostatic plate\nPlatform diameter: \t450 mm\nExpansion diameter: 800 mm\nMaximum measureable diameter: 1000 mm\nAxial bearing capacity: 1200 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: 0,5 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm\nLevelling range: \t± 1°\nResolution: \t0,1°\n\nPneumostatic R axis\nUseful traverse length: \t500 mm\nLinearity: \t≤ 0,5 μm su 500 mm\nSpeed: \t0,2 – 10 mm/s\nResolution: \t0,1 μm\n\nC axis (pneumostatic column)\nUseful traverse length: 500 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution: 0,1 μm\n\nPick-up\nMeasurement positioning: In three positions (horizontal, vertical, lateral)\nMeasurement strenght : Internal/esternal 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional of lenght 80 - 150 – 240 mm\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "time", "gaps", "base", "plate", "pieces", "device", "regards", "bearings", "conicity", "circular", "training", "operator", "aerospace", "linearity", "cone shape", "coaxiality", "parallelism", "cylindricity", "short period", "FFT algorithm", "concentricity", "testing costs", "R250 SM Product", "solid structure", "Circom software", "utmost accuracy", "complex surfaces", "ideal instrument", "basic application", "complex geometries", "thickness variation", "considerable weight", "Integrative packages", "R250 roundness tester", "example harmonic analysis", "multiple measurement needs", "single sinusoidal component", "inconsistent profile sections", "following geometric tolerances", "R250 Labortary Roundness Tester", "machine manufacturing industries" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 28, "imageuri": "https://productimages.withfloats.com/actual/63c7c6a37a4ce700014e17ba.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c6a37a4ce700014e17ba.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:20:14.172Z", "updatedon": "2023-02-06T14:35:05Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r250-labortary-roundness-tester/28", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness", "linearity", "cylindricity", "conicity", "concentricity", "parallelism", "coaxiality", "thickness variation", "Labortary Roundness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }