Home> Products> suit machines

{ "products": [ { "_id": "66855670c0e30a1804aed58b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roundness n Cylindricity Measuring Machines", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nRetrofit your existing Roundness and Cylindricity Instruments with SeRound an Inhouse developed Retrofit package comprising of Electronics and Software to suit machines for various manufactures. \n\n•\tSeRound the Software Retrofit for Talyrond252 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to analyze / detect the following \n•\tParameters: Roundness,Concentricity,Relative Ecentricity, Flatness. Squareness, Coaxiality, Cylindricity, Axial Runout, Radial Runout, Face Parallelism,Straightness,Parallelism\n\nData acquisition, profile filtering, evaluation of the roundness and other parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) Arm and Column movement (Incremental / Absolute), Gauge Position and orientation has been realized by SeRound. \n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. \n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nTalyrond 252 with SeRound Analysis software Retrofit comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "Axial Runout", "Radial Runout", "Measure window", "default cycles", "Gauge Position", "same parameters", "table centering", "Column movement", "amplifier range", "measuring speed", "Data acquisition", "Face Parallelism", "other parameters", "graphical output", "Salbro Engineers", "Machine Pictures", "profile filtering", "Retrofit Packages", "existing Roundness", "instrument control", "Relative Ecentricity", "various manufactures", "PC Retrofit Roundness", "one precise instrument", "respective Manufactures", "Cylindricity Instruments", "many similar work pieces", "12 months warranty period", "Electronic Interface unit", "interactive user interface", "Cylindricity Measuring Machines", "SeRound Analysis software Retrofit" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f465087edfaf5000152beb4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:28.094Z", "updatedon": "2024-07-03T13:53:21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//pc-retrofit-roundness-n-cylindricity-measuring-machines/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [ "Roundness", "Flatness", "Cylindricity", "Radial Runout", "Axial Runout", "Straightness", "Concentricity", "Talyrond 252", "Retrofit", "SeRound" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "63c7e7b55626f700012bf788", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RTP80 Portable roughness tester", "description": "RTP80 roughness tester, easy to handle and user-friendly, allows to characterize even the most complex surfaces, easily and conveniently. The shiny 5.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances can be printed immediately using the thermal printer built in the instrument. The graphs and parameters are all of interactive type, to allow the operator to choose how to present the results. RTP80 is suitable for production departments, where the measurement settings for batch analyses can be protected by password, and it is also ideal to be used in metrological laboratories where statistical analyses can be carried out on the measurements taken. RTP80 calculation unit can be connected up to 4 measurement translators for various types of pieces.\n\nCHARACTERISTICS:\nMeasurement range: ±500μm ( TL90 )\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 - 8 mm\nCut-off number: Selectable from 1 to 19\nTraverse lenght: Up to 50 mm ( TL90 )\nPick-up: Inductive, it can be rotated of 90° for lateral measurements\nPrinter: Integrated, thermal printer\nMeasurement parameters:54 parameters\n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsk, Rku, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, Pdc, PPc, R, Rx, AR, Wte, W, AW, Wx, Rke, Rpke, Rvke, Mr1e, Mr2e Rmax, R3z, R3zm)\n\nGraphs displayed: Roughness, waviness, primary, bearing capacity curve, and distribution of Ordinates.\nUnit of measurement: Millimeters and inches\nInterface: TFT, 5.7'' colour graphic Touchscreen display and 3 waterproof membrane buttons\nLanguages: Italian, French, English, German, Spanish, Portuguese\nMemory: Up to 1000 measures\nAccessories: RTP80 roughness tester, Translator (TS4, TS7, TL90, Rotarix 55 or Rotarix 125), 110-230V battery charger, roughness sample, case, user manual\n\nCONNECTABLE TRANSLATORS:\n\nTS7\nCompact and easy to handle translator, it allows taking measurements in the most difficult conditions, by simply holding it in one hand. Maximum traverse length of 25 mm\n\nTL90\nProfessional translator with internal metrological reference that allows characterizing W waviness parameters\n\nPositioning micrometrics on the piece, with traverse length of 110 mm, bistable nib for measurements with and without skid. Maximum traverse length of 50 mm.\n\nROTARIX 55\nRotary unit with horizontal axis for measuring radial roughness (e.g. pipes, balls) on medium-size pieces, measurement diameter from Ø3 ÷ Ø60 mm.\n\nROTARIX 125\nRotary unit with vertical axis for measuring radial roughness on bulky pieces, measurement diameter from Ø10 ÷ Ø160 mm.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "radial roughness", "measurement settings", "3 waterproof membrane", "RTP80 roughness tester", "measurement parameters", "RTP80 calculation unit", "production departments", "Maximum traverse length", "4 measurement translators", "metrological laboratories", "colour touchscreen display", "surface metrology products", "RTP80 Portable roughness tester", "internal metrological reference", "colour graphic Touchscreen display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/63c7e7b759521a0001845857.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7e7b759521a0001845857.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-18T12:36:05.279Z", "updatedon": "2024-07-05T10:57:57Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rtp80-portable-roughness-tester/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Roughness", "Roughness Measurement", "Surface Roughness", "Surface Finish", "Ra", "Roughness Mean" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ea9a9c7f9dcce0001a0a27c", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT10 Palmtop Roughness Tester", "description": "RT10 roughness tester is the basic tester of the range. This instrument is ideal to measure pieces directly on work stations or production machinery. Thanks to its simplicity of use, it is ideal for the simple numeric characterization of the roughness of an object and boasts quick testing times. Thanks to the internal memory, simple handling and integrated battery, RT10 is ideal for taking measurements in difficult conditions, like in case of bulky or complex pieces.\n\nCHARACTERISTICS::\nMeasurement range: ±200μm\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 16 mm\nPick-up: \tInductive, it can be rotated of 90° for lateral measurements (with SB50 probe)\nMeasurement parameters: 11 parameters \n(Ra, Rq, Rt, Rz, Rc, RSm, Rmr, Rmax, RPc, Pt, R, AR, Rx)\nUnit of measurement: Millimetres and inches\nInterface: \tLCD, 132x32 monochromatic graphic display and 4 waterproof membrane buttons\nLanguages: \tItalian, French, English, German, Spanish, Portuguese\nMemory: \tUp to 1000 measurements\nAccessories: RT10 roughness tester, 1\n 10-230V battery charger, adjusting walls, \n 8 mm diameter end plug for connection to stand, \n roughness sample, Case, User Manual\n\nRT10 Plus (code 1.101). RT10 roughness tester is also available in the Plus version which features a plug-in connector that allows to interchange the pick-up, thus being able to take measurements on all types of surfaces, by simply mounting the most suitable pick-up.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 22, "imageuri": "https://productimages.withfloats.com/actual/63c6713ef959db00013f5ab3.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c6713ef959db00013f5ab3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-04-29T16:22:31.915Z", "updatedon": "2024-07-03T14:00:21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt10-palmtop-roughness-tester/22", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Surface Roughness", "Portable", "Roughnesss", "Ra", "Rz", "Rt", "Roughness Tester", "Roughness Measurement" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b383595c4160537731eb2", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Surface Roughness & Waviness Retrofit Perthometer PRK", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nRetrofit your existing Roughness Instruments with SeSurf an Inhouse developed Retrofit package comprising of Electronics and Software to suit machines for various manufactures. We have in the past developed customized solutions to meet various customer requirements and continue to do so. We also import used instruments refurbish, retrofit and supply to parties. Our retrofit solution comes with 1 year of free warranty. Kindly contact us for system upgrades to suit your machine\n\nPerthometer PRK with S Surf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. \nThe Software is User friendly and Powerful. \nThe Perthometer instrument maintains a high level of measurement accuracy and performance reliability, and is available at minimum capital investment. \nThe Motorised Column allows to measure up to 350mm above the surface.\n\nSeSurf provides 14 parameters for Unfiltered Profiles \n24 for Roughness and Waviness parameters. \nIt also enables the user to perform Statistical analysis on measured results.\nCamber Analysis for precise Roller bearings\nSeSurf’s Bearing Ratio curve enables the user to asses contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nContact us revive the Old but Gold machines", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "Kindly", "Software", "respective", "Electronics", "suit machines", "Pictures used", "system upgrades", "used instruments", "Waviness Machine", "Retrofit Packages", "state compatibility", "Roughness Instruments", "various customer requirements", "developed customized solutions", "Inhouse developed Retrofit package" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 2, "imageuri": "https://productimages.withfloats.com/actual/59b93204207f790b749ca761.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/59b93204207f790b749ca761.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2017-09-13T13:24:35.135Z", "updatedon": "2024-07-04T09:28:06Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//surface-roughness-waviness-retrofit-perthometer-prk/2", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": false, "maxcodorders": -1, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Roughness Retrofit", "tags": [ "Roughness Parameteres", "Roughness", "Roughness Measurement", "Measure Components", "bearing ratio curve", "ra", "Rz", "unfiltered profile", "Gaussian Filter", "2CR filter", "Digital filters", "Machine control", "Pre-owned Machines", "Retrofit Pakage", "Surface Roughness & Waviness Retrofit", "surface roughness retrofit", "Analysis software", "Roller Camber Measurement", "Roller Camber Analysis program", "Roller Camber Assesment" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "668556664bffde21ec92eb2b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R500 Roundness Tester", "description": "R500 roundness tester is located at the top of machines for the characterization of revolution surfaces in the world panorama for what concerns the maximum dimensions of the object that can be measured; born from the thirty year experience that SM has in this field, it has been designed to measure bulky and heavy pieces, maintaining high accuracies.\n\nR500 features 3 metrological axes, pneumostatically supported, for measurement and positioning, which ensure fluent movements without frictions and remarkable sturdiness of the entire system.\n\nThe flagship application of R500 is the characterization of bulky particulars in the energy sector (turbines, compressors, bearings) where all the essential characteristics for the final quality of the product must be determined.\n\nThe motorized plate allows the automatic centering of the piece, executed with a procedure inside the Circom software.\n\nCHARACTERISTICS:\nPneumostatic plate\nPlatform diameter: 650 mm\nExpansion diameter: 1200 mm\nMaximum measureable diameter: 1300 mm\nAxial bearing capacity: 1500 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: 0,25 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm with automatic cycle\nLevelling range: ± 1°\nResolution: 0,009° (40k pts/rev)\n\nPneumostatic R axis\nUseful traverse length: 650 mm\nLinearity: ≤ 0,5 μm su 500 mm\nSpeed: 0,2 – 10 mm/s\nResolution: 1 μm\nC axis (Column with recirculating ball guides)\nUseful traverse length: 900 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution 0,1 μm\nPick-up Measurement positioning: In three positions (internal, external, lateral)\nMeasurement strength : Internal/external 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional with 8 mm ruby sphere", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "1 μ", "6 rpm", "3 rpm", "15 mm", "10 mm", "±5 mm", "150 mN", "0,5 μm", "600 mm", "900 mm", "C axis", "1500 kg", "1300 mm", "1200 mm", "±1000 μm", "plate level", "500 mm Speed", "heavy pieces", "final quality", "energy sector", "entire system", "plate surface", "Radial run-out", "world panorama", "Maximum height", "Centring range", "three positions", "Linearity error", "manual rotation", "Circom software", "high accuracies", "motorized plate", "650 mm Linearity", "fluent movements", "8 mm ruby sphere", "bulky particulars", "Measurement range", "maximum dimensions", "Expansion diameter", "3 metrological axes", "revolution surfaces", "automatic centering", "Pneumostatic R axis", "Internal/external 20", "Measurement strength", "flagship application", "remarkable sturdiness", "R500 Roundness Tester", "Useful traverse length", "Axial bearing capacity", "thirty year experience", "essential characteristics", "recirculating ball guides", "Maximum measureable diameter", "Pick-up Measurement positioning", "automatic cycle Levelling range", "Pneumostatic plate Platform diameter" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 47, "imageuri": "https://productimages.withfloats.com/actual/63e10f3245c48e0001eb3324.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63e10f3245c48e0001eb3324.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:47:18.891Z", "updatedon": "2024-07-03T13:47:18.891Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r500-roundness-tester/47", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "", "", "roundness tester", "", "large Size Bearings measurement", "", "Form Measurement", "", "Roundness Measuring", "", "Cylindricity", "", "turbines measurement", "", "compressors measurement", "" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "66855600c0e30a1804aed583", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PC Retrofit Roughness & Waviness", "description": "Note*-Machines displayed are Products/property of respective Manufactures.\nMachine Pictures used are to state compatibility of our Retrofit Packages only.\n\nDescription :\n• SeSurf User Interface to Control, Measure and Position\n• Raw Profile ( Best Fit Line, Curve, Slope Remove)\n• Unfiltered profile Analysis (24 parameters)\n• Roughness profile Analysis (24 parameters)\n• Waviness profile Analysis (24 parameters)\n• Three Filter Modes: Gaussian, 2CR & 2CR PC\n• Bearing Ratio Curve Parameters\n• Crowning (Camber Measurements)\n• Multi Data Plot\n• Specials programs for Analysis can also be developed\n\nSeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use.\nThe Software is User friendly and Powerful.\nSeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus\ndecreasing Time and improving Productivity\nEffective surface characterization requires accurate acquisition of data, coupled with appropriate analysis.\nTraditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics.\nSeSurf incorporates the best industry Standards for data analysis.\nData acquired from the instrument is represented graphically in Raw, Unfiltered, Roughness and Waviness modes.\nRaw data acquired can be analyzed for Slope Removal, Best Fit Line and Best Fit Arc which ever suits the form of the job.\nThere is also a provision for the user to omit areas, unwanted for further analysis.\nUnfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Guassian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.\nSeSurf provides 14 parameters for Unfiltered Profiles and 24 for Roughness and Waviness parameters. It also enables the user to perform Statistical analysis on measured results.\nSeSurf’s Bearing Ratio curve enables the user to asses contact/area at a given depth from profile height in percentage to the assessment length.\nParameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.\n\nSeSurf Machine Retrofit comes with 12 months free warranty.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "2.5 mm", "0.8 mm", "2CR PC", "0.25 mm", "0.08 mm", "Raw data", "later date", "Raw Profile", "Best Fit Arc", "14 parameters", "Slope Removal", "data analysis", "Best Fit Line", "Waviness modes", "profile height", "surface texture", "Multi Data Plot", "other conditions", "Machine Pictures", "assessment length", "3 digital filters", "Specials programs", "surface roughness", "Retrofit Packages", "incomplete picture", "Three Filter Modes", "Waviness parameters", "Camber Measurements", "Unfiltered profiles", "laboratory standard", "cutoff wave lengths", "accurate acquisition", "Statistical analysis", "appropriate analysis", "PC Retrofit Roughness", "SeSurf User Interface", "respective Manufactures", "SeSurf Machine Retrofit", "12 months free warranty", "best industry Standards", "Waviness profile Analysis", "SeSurf computer Interface", "Roughness profile Analysis", "Unfiltered profile Analysis", "Bearing Ratio Curve Parameters", "Traditional measurement methods", "Effective surface characterization", "complex, interrelated characteristics" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/5ea9de9350b2c500013da0ef.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5ea9de9350b2c500013da0ef.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.936Z", "updatedon": "2024-07-03T13:51:05Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pc-retrofit-roughness-waviness/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SeSurf Roughness Retrofit ", "category": "Surface Roughness Retrofit", "tags": [ "Roughness", "Waviness", "Analysis", "Roughness Average", "Retrofit", "Rz", "Ra" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685560064f7f623a8ef3983", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SeRound PC Retrofit Roundness Measuring Machine", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "8 mm", "5 rpm", "20 Kg", "0,05 μ", "0,04 μ", "250 mm", "600 μm", "500 mm", "± 0,6 mm", "Pls Note", "high level", "Other speeds", "minimum zone", "Polar filter", "unwanted data", "table surface", "Measure window", "Leveling range", "default cycles", "Rotation speed", "same parameters", "numatic bearing", "minimum squares", "amplifier range", "Centering range", "table centering", "Data acquisition", "graphical output", "Salbro Engineers", "rotating spindle", "Retrofit package", "Machine pictures", "profile filtering", "measurement chain", "Stylus resolution", "Software Retrofit", "Coaxiality Run-out", "capital investment", "instrument control", "measurement accuracy", "Proprietary products", "roundness parameters", "minimum superior plan", "maximum inferior plan", "Linear Filter cut-off", "Max work piece weight", "one precise instrument", "Spindle rotation error", "Stylus measuring range", "performance reliability", "optimal measuring speed", "Max work piece diameter", "Respective Manufacturers", "Air-bearing rotary table", "many similar work pieces", "SeRound Analysis software", "12 months warranty period", "Electronic Interface unit", "The Hommel 1000 instrument", "interactive user interface", "transmission characteristics", "maximum subscribed circumference", "minimum circumscribed circumference", "SeRound PC Retrofit Roundness Measuring Machine PC Retrofit Roundness Measuring Machine" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b194eebf1e90001c9fdb9.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:45:36.24Z", "updatedon": "2024-07-03T13:45:36.24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/seround-pc-retrofit-roundness-measuring-machine/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Surface Metrology Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "6685548afcd2841c9c9ec3dd", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Hommel 1000 SeRound Retrofit", "description": "PC Retrofit Roundness Measuring Machine : Hommel 1000\n\nPls Note : Machine pictures Displayed are Proprietary products of Respective Manufacturers. Pictures of machines are used to show compatibility of our Retrofit package to them.\n\n•\tAir-bearing rotary table: Ø 150mm expandable.\n•\tRotation speed: 5rpm\n•\tCentering range: 3mm\n•\tLeveling range: ± 0,6 mm\n•\tMax work piece diameter: 500 mm\n•\tMax work piece weight: 20 Kg\n•\tSpindle rotation error: 0,04 μm \n•\tStylus resolution: 0,01 - 0,05 μm \n•\tStylus measuring range: 400 - 600 μm \n•\tPolar filter: undulation/revolution: 1÷15, 1÷50, 1÷500, 15÷500\n•\tLinear Filter cut-off: 0,25 - 0,8 - 2,5 - 8 mm\n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality, Run-out.\n•\tThe Hommel 1000 instrument has a rotating spindle with an numatic bearing. Whilst the Hommel 1000 maintains a high level of measurement accuracy and performance reliability, it represents only a minimum of capital investment. \n•\tThe optimal measuring speed is 5 rpm. Other speeds would reduce the transmission characteristics of the measurement chain. In this model the arm is moved manually and it allows to measure at 250 mm in height from table surface.\n•\tSeRound the Software Retrofit for Hommel 1000 is accurate, user friendly, robust and is performance driven. It is developed in-House at Salbro Engineers and provides a through interactive user interface between the user and the Instrument with the help of the Electronic Interface unit also developed in-House at Salbro Engineers\n\nAll Integrated to make one precise instrument to detect the following \n•\tParameters: Roundness, Concentricity, Flatness. Squareness, Coaxiality Run-out..\n\nData acquisition, profile filtering, evaluation of the roundness parameters and graphical output of the results as well as for the instrument control (like Starting and Stopping the motor and selection of the amplifier range) has been realized by SeRound.\n\nThe cycle of measure guides the operator in the operations of table centering and leveling and subsequently in the acquisition of the profile. Besides the default cycles of measure it is also possible to make calculations on the previously acquired profiles; moreover it is possible to plan the cycle of acquisitions. This is very useful especially when you have to measure many similar work pieces, with the same parameters and you need to enhance the measuring speed.\n\nSeRound allows you to choose the method of calculation to perform the measurement and to elaborate the results. For the Roundness: circumference of the minimum squares, circumference of minimum zone, minimum circumscribed circumference, maximum subscribed circumference. For the Flatness: plan of the minimum squares, plan of the minimum zone, minimum superior plan and maximum inferior plan. One can even omit unwanted data not required to be analyzed.\n\nSeRound’s Setup and Measure window provides a tool to the user to center the jobs quite accurately and quickly thus saving on time and improving productivity. \n\nHommel 1000 with SeRound Analysis software comes with 12 months warranty period", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 41, "imageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/6220a554d0890e00013f4b93.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:22.21Z", "updatedon": "2024-07-03T13:39:22.21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//hommel-1000-seround-retrofit/41", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Salbro Engineers", "category": "Roundness Tester Retrofit", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false }, { "_id": "66855489bb6dd81a38b9b1d4", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT-10 Plus", "description": "Palmtop Roughness Tester RT-10 Plus\n\n•\tTechnical specification\n•\tRoughness parameters according to ISO 4287: Ra, Rq, Rt, Rz, Rc, RSm, Rmr & Rmax Special.\n•\t4 roughness parameters according to ISO 12085: Pt, R, AR, Rx. Measuring length: up to 16 mm.\n•\tMeasurement range: ±20 µm and ±80 µm.\n•\tCut-off lengths: 0.25 – 0.8 – 2.5 mm.\n•\tGaussian filter according to ISO 11562.\n•\tDisplay: 16-character, 2-line LCD.\n•\tTouch keyboard of 4 keys.\n•\tRechargeable battery incorporated.\n•\tMulti language: Italian, French, English, German and Spanish.\n•\tBuffer of 30 measurements.\n•\tSerial data output.\n•\tGauge rotable through 90° for lateral measurements.\n•\tResolution 0.01 µm and 0.04 µm.\nThe portable, palmtop roughness tester RT-10 permits evaluation of the most varied roughness parameters directly on the site of production offering, in a compact package, the advantages of being easy to carry, simple to use and reliability of measurement.\n\nDesigned for use on the shop floor, it is shielded against external agents by a special protective membrane. It can measure in difficult positions, including when held in the hand, in the vertical traverse position. The gauge may be turned by 90° to permit measurements in grooves or between shoulders. The 400x250 mm measurement support in black granite with adjustable steel column can be used with RT-10 to measure pieces that are bulky or difficult to position.\n\nComplete Presentation of Results\n\nThis instrument can be connected to the PR-10, a 24-column printer providing certification both of the parameters measured, together with indication of the tolerances, and of the profile drawing. Using the serial output line, data can be downloaded to a Personal Computer running the Remote-10 program under Windows 98/ME/NT4/2K, XP with which measurements can be made, data processed, parameters displayed and drawings of the profile presented using various options. It has a buffer of 30 measurements which can be displayed and printed at any time. The most common functions, such as recalling results, or cut-offs and starting measurements, can be accessed directly using the keyboard, while others are available by activating suitable, easy to comprehend menus. Among other things, these menus permit the presetting of tolerance thresholds which, when linked to one of the measurable parameters, facilitate series checks.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "±80 µ", "16 mm", "0.04 µ", "4 keys", "±20 µm", "2.5 mm", "ISO 4287", "ISO 12085", "RT-10 Plus", "shop floor", "2-line LCD", "other things", "Rmax Special", "series checks", "black granite", "Touch keyboard", "suitable, easy", "Multi language", "30 measurements", "profile drawing", "various options", "external agents", "compact package", "Gaussian filter", "Cut-off lengths", "common functions", "Measuring length", "Remote-10 program", "Personal Computer", "24-column printer", "Measurement range", "Serial data output", "serial output line", "difficult positions", "production offering", "lateral measurements", "tolerance thresholds", "Rechargeable battery", "measurable parameters", "Complete Presentation", "4 roughness parameters", "Technical specification", "adjustable steel column", "vertical traverse position", "varied roughness parameters", "special protective membrane", "400x250 mm measurement support", "portable, palmtop roughness tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/5f7b1ba199d7e200019867cd.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/5f7b1ba199d7e200019867cd.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2024-07-03T13:39:21.626Z", "updatedon": "2024-07-03T13:55:42Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM//rt-10-plus/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM-Instruments", "category": "Surface Roughness Tester", "tags": [ "Portable Roughness", "Roughness", "Surface Roughness", "Surface Metrology", "Roughness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": "", "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }