Home> Products> surface metrology products

{ "products": [ { "_id": "63c7f5df722f5e0001c0af0b", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT10G Palmtop graphic roughness tester", "description": "RT10G roughness tester was born from the success obtained by RT10; easy to handle and reliable like the basic version, it also carries out advanced analyses typical of a laboratory instrument.\n\nIn addition to 31 roughness parameters calculated, RT10G displays the graphs of the roughness profile, primary profile, bearing capacity curves, distribution of ordinates, and allows to set tolerances on single parameters and personalize prints. RT10G uses new generation electronics with 0.001 µm resolution that ensure always reliable results and displays them in a user-friendly fashion, thanks to the internal icon menus taken from modern Smartphones.\n\nCHARACTERISTICS:\nMeasurement range: ±300μm\nResolution: 0,001 μm\nCut-off Lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 16 mm\nPick-up: \tInductive, it can be rotated of 90° for lateral measurements (with SB50 probe)\nMeasurement parameters: 31 parameters \n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsm, Rdc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, RPc, PPc – Rk, Rpk, Pvk, Mr1, Mr2 – Pt, R, Rx, AR-R3, R3zm, Rmax)\nGraphs displayed: Roughness, primary, bearing capacity curve, and distribution of ordinates\nUnit of measurement: Millimetres and inches\nInterface: \tTFT, 2’’ colour graphic display and 4 lateral waterproof membrane buttons\nLanguages: Italian, French, English, German, Spanish and Portuguese\nMemory: Up to 1000 measurements\nAccessories: RT10G roughness tester, 110-230V battery charger, adjusting walls, 8 mm diameter end plug for connection to stand, roughness sample, Case, User Manual.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 41, "imageuri": "https://productimages.withfloats.com/actual/63c7ff0cf7454c00013b50b7.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7ff0cf7454c00013b50b7.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-18T13:36:31.508Z", "updatedon": "2024-07-05T10:58:24Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt10g-palmtop-graphic-roughness-tester/41", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Surface Roughness", "Roughnesss", "Roughness Tester", "Portable Roughness", "Roughness Parameteres" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63c7e7b55626f700012bf788", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RTP80 Portable roughness tester", "description": "RTP80 roughness tester, easy to handle and user-friendly, allows to characterize even the most complex surfaces, easily and conveniently. The shiny 5.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances can be printed immediately using the thermal printer built in the instrument. The graphs and parameters are all of interactive type, to allow the operator to choose how to present the results. RTP80 is suitable for production departments, where the measurement settings for batch analyses can be protected by password, and it is also ideal to be used in metrological laboratories where statistical analyses can be carried out on the measurements taken. RTP80 calculation unit can be connected up to 4 measurement translators for various types of pieces.\n\nCHARACTERISTICS:\nMeasurement range: ±500μm ( TL90 )\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 - 8 mm\nCut-off number: Selectable from 1 to 19\nTraverse lenght: Up to 50 mm ( TL90 )\nPick-up: Inductive, it can be rotated of 90° for lateral measurements\nPrinter: Integrated, thermal printer\nMeasurement parameters:54 parameters\n(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsk, Rku, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, Pdc, PPc, R, Rx, AR, Wte, W, AW, Wx, Rke, Rpke, Rvke, Mr1e, Mr2e Rmax, R3z, R3zm)\n\nGraphs displayed: Roughness, waviness, primary, bearing capacity curve, and distribution of Ordinates.\nUnit of measurement: Millimeters and inches\nInterface: TFT, 5.7'' colour graphic Touchscreen display and 3 waterproof membrane buttons\nLanguages: Italian, French, English, German, Spanish, Portuguese\nMemory: Up to 1000 measures\nAccessories: RTP80 roughness tester, Translator (TS4, TS7, TL90, Rotarix 55 or Rotarix 125), 110-230V battery charger, roughness sample, case, user manual\n\nCONNECTABLE TRANSLATORS:\n\nTS7\nCompact and easy to handle translator, it allows taking measurements in the most difficult conditions, by simply holding it in one hand. Maximum traverse length of 25 mm\n\nTL90\nProfessional translator with internal metrological reference that allows characterizing W waviness parameters\n\nPositioning micrometrics on the piece, with traverse length of 110 mm, bistable nib for measurements with and without skid. Maximum traverse length of 50 mm.\n\nROTARIX 55\nRotary unit with horizontal axis for measuring radial roughness (e.g. pipes, balls) on medium-size pieces, measurement diameter from Ø3 ÷ Ø60 mm.\n\nROTARIX 125\nRotary unit with vertical axis for measuring radial roughness on bulky pieces, measurement diameter from Ø10 ÷ Ø160 mm.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "radial roughness", "measurement settings", "3 waterproof membrane", "RTP80 roughness tester", "measurement parameters", "RTP80 calculation unit", "production departments", "Maximum traverse length", "4 measurement translators", "metrological laboratories", "colour touchscreen display", "surface metrology products", "RTP80 Portable roughness tester", "internal metrological reference", "colour graphic Touchscreen display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/63c7e7b759521a0001845857.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7e7b759521a0001845857.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-18T12:36:05.279Z", "updatedon": "2024-07-05T10:57:57Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rtp80-portable-roughness-tester/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Roughness", "Roughness Measurement", "Surface Roughness", "Surface Finish", "Ra", "Roughness Mean" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210cd7d42cde700018b45d3", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PGS100 Profilometer", "description": "The PGS100 profilometer allows to acquire 2D profiles in an extremely simple and intuitive way, thanks also to its measuring range of 130 mm in length (X) and 50 mm in height (Z).\n\nThe use of the tool takes place through the commands given by the software or from the PC keyboard in a very intuitive way.\n\nThe Profile Studio analysis program is equipped with all the CAD functions necessary for the dimensioning of your pieces, it also allows you to create programs to automate the characterization of the elements, for example during series measurements.\n\nThe standard configuration that includes the worktable with \"T\" slot and the 32 mm chisel measuring probe, can be enriched and completed with various accessories, including the positioner with 3 or 4 degrees of freedom on bearings and the precision vice that allows you to firmly clamp the pieces during measurements.\n\nThe calibration, thanks to the dedicated calibration sample, takes place guided by the software.\n\nCHARACTERISTICS:\nUnit of measure: \tMillimetres and inches\nExploration stroke (X): \t130 mm (5,12 in)\nMeasuring range (Z): \t50 mm (1,97 in)\nColumn travel (Y) \t320 mm (12,6 in) manual\nSampling interval (X): \t0,5 μm (0,02 μin)\nZ axis resolution: \t0,2 μm (0,008 μin)\nPositioning speeds: \t0-10 mm/s (0-7 in/s)\nMeasurement speed: 0.2 mm/s to 2 mm/s (from 0.008 in/s to 0.08 in/s)\nTip radius: \t20 μm (0,8 μin)\nCNC cycles: Automatic CNC measuring and positioning cycles with auto-comparion\nConnection: USB interface to Windows© PC\nLanguages: English, French, German, Italian, Spanish, Portuguese and Slovenian\nDimensions (L x D x H): \t1030 x 410 x 660 mm (41 x 16 x 26 in)\nTotal weight: 34 kg (75 lbs)\nSupply voltages: 110-240 V ; 50-60 Hz\nWorking temperatures: 15 - 25°C (59 - 77°F)\nSoftware: \tProfile Studio Basic\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and machine accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "use", "tool", "place", "50 mm", "length", "pieces", "height", "simple", "130 mm", "example", "T\" slot", "freedom", "elements", "programs", "software", "commands", "bearings", "4 degrees", "worktable", "positioner", "PC keyboard", "2D profiles", "dimensioning", "CAD functions", "intuitive way", "precision vice", "measuring range", "characterization", "series measurements", "various accessories", "standard configuration", "The PGS100 profilometer", "32 mm chisel measuring probe", "dedicated calibration sample", "The Profile Studio analysis program" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 33, "imageuri": "https://productimages.withfloats.com/actual/63c7b8fb7a4ce700014e0b1a.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7b8fb7a4ce700014e0b1a.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:59:09.691Z", "updatedon": "2024-07-05T11:01:17Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/pgs100-profilometer/33", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Contour Profilometer", "tags": [ "Profilometers", "Contour", "Contour Measurement", "Form Measurement", "CAD functions", "Automatic CNC positioning", "Automatic CNC measuring" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210ca3f6cf79500017ec1d7", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "WARPsurf ", "description": "The WARPsurf is a turning point in the world panorama of the instruments for surface analysis, because it gives in a single portable instrument the capability to perform both roughness and profilometry analysis.\n\nThe brilliant 7’’ touch screen display, combined with modern user interface, allows the user to become quickly familiar with the instrument, setting easily the measure parameters, positioning on the piece and performing the analysis.\n\nThe instrument is equipped with a 1GHz microprocessor that allows to have a fluid system and fast processing even with complex profiles.\n\nExtremely compact and handy, the WARPsurf allows to position easily on big pieces thanks to the integrated micrometric that covers 110 mm range.\n\nThanks to the standard USB interface, it is possible to plug a regular USB drive to save images or PDF reports; using this interface the instrument can connect to a common desktop printer and directly print on A4.\n\nThe instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.\n\nFEATURES:\nMeasurement range : ±1500μm\nResolution : 0,0001 µm - (0,1nm)\nCut-off lenght : 0,08 - 0,25 - 0,8 - 2,5 - 8 mm\nCut-off number : Selectable from 1 to 20 (1 to 6 for 8 mm cut-off)\nTraverse lenght : Up to 60 mm\nPick up \tInductive, it can be rotated of 90' for lateral measurements and interchangeable styluses\n\nMeasurement parameters \t81 roughness parameters\nRa, Rq, Rt, Rz, Rp, Rv, Rc, Rsk, Rku, RSm, RΔq, RΔa, Rmax, Rδc, Rmr, Rmr(c), RPc, RLo, Rlr, Rzjis, RHSC, R3z, hp, Ep\nPa, Pq, Pt, Pq, Pv, Pc, Psk, Pku, PSm, PΔq, Pδc, PPc, PLo, Plr, PHSC\nWa, Wq, Wt, Wz, Wp, Wv, Wc, Wsk, Wku, WSm, WΔq, Wδc, WPc, WLo, Wlr, WHSC\nRk, Rpk, Rvk, Mr1, Mr2, A1, A2, Rpk*, Rvk*, WDSm, WDc, WDt\nR, AR, Rx, W, Aw, Wx, Wte, Rke, Rpke, Rvke, Mr1e, Mr2e, A1e, A2e\n\nAvailable charts: Roughness, Waviness, Dominant waviness, Primary, Material ratio curve (bearing) and height amplitude distribution (density).\nUnit of measurement : Millimeters and inches\nUser interface : Color display touchscreen TFT, 7 inches, 3 impermeable membrane switches\nLanguages: Italian, French, Inglese, German, Spanish, Portuguese, Japanese, Chinese, Korean\nMemory \tUp to 4000 measurements for roughness – Up to 1000 for profilometry\nCAD : Functions to process the integrated profile,\nPoints: carthesian – on the profile – intersection – limit – maximum - minimum\nLines: best-fit – polar – interrupted - between two or more points – parallel\nArcs: best-fit – interrupted - between three or more points – center and radius – tangent\nDimensions: Aligned – Vertical – Horizontal – Radius – Angle – Line-point distance\nAdvanced: Axis alignment – Z magnification\nVisualization: Pan – Zoom\nPrinting : 1- Capability to print on a common USB desktop printer in A4 format (Example: HP deskjet)\n2- Capability to print to PDF on a USB drive\n3- Printing on a PR11 device using Bluetooth connection\nEquipment : WARPsurf roughness tester with SB300 magnetic probe and stylus 1-Y roughness, battery charger 110-230V, roughness specimen, plastic case, user manual\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "A4.", "images", "capability", "big pieces", "instruments", "PDF reports", "110 mm range", "fluid system", "The WARPsurf", "turning point", "world panorama", "fast processing", "surface features", "surface analysis", "complex profiles", "dimensional ones", "regular USB drive", "measure parameters", "1GHz microprocessor", "WARPsurf SM Product", "profilometry analysis", "modern user interface", "standard USB interface", "integrated micrometric", "common desktop printer", "interchangeable styluses", "Portable Roughness Tester", "single portable instrument", "brilliant 7’’ touch screen display" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/63c7bea07a4ce700014e0efa.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7bea07a4ce700014e0efa.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:45:19.62Z", "updatedon": "2024-07-05T10:55:55Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/warpsurf-/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "surface analysis", "WARPsurf", "roughness parameters", "Roughness", "Waviness", "Dominant waviness", "Material ratio curve (bearing)", "height amplitude distribution", "Ra", "Surface Roughness", "Surface Metrology", "Roughness Tester", "roughness average", "Roughness" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210c93b584a740001165840", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "ROUNDNESS SPECIMENS", "description": "ROUNDNESS SPECIMENS\n\nSpecimens are available for calibration and the functional check of instruments, specifically studied for roundness testers; upon request calibration certificates are released.\nIn general, three specimens are used on roundness testers:\n- Specimen sphere or hemisphere in steel or optical glass that allows to quantify and check the plate’s rotary oscillations, and therefore adjust the error\n- Guizzo specimen that allows to calibrate and check the pick-ups’ sensitivity, through a radial known groove\n- The specimen cylinder made in steel or granite, that thanks to its utmost cylindricity accuracy, allows to align the column of the roundness testers to the plate’s axis, and to check precision during movement.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines, accessories and calibration standards / specimens.", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "axis", "error", "plate", "steel", "groove", "radial", "column", "granite", "request", "movement", "precision", "hemisphere", "instruments", "optical glass", "Guizzo specimen", "Specimen sphere", "three specimens", "functional check", "roundness testers", "specimen cylinder", "Roundness Speciman", "ROUNDNESS SPECIMENS", "rotary oscillations", "pick-ups’ sensitivity", "calibration certificates", "utmost cylindricity accuracy" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 31, "imageuri": "https://productimages.withfloats.com/actual/6210c93eae7e570001297f86.png", "tileimageuri": "https://productimages.withfloats.com/actual/6210c93eae7e570001297f86.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:40:59.544Z", "updatedon": "2023-02-24T12:44:42Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/roundness-specimens/31", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "Specimen hemisphere", "Guizzo specimen", "Calibrate", "Specimen cylinder", "calibrate sensitivity", "Specimen cylinder", "Glass Hemisphere", "Master Cylinder" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210c557584a740001165816", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R300 Laboratary Roundness Tester", "description": "R300 roundness tester is one of the best devices worldwide for the characterization of surfaces, born from thirty years of experience boasted by SM in this field, it was specifically designed to measure bulky and heavy pieces, with utmost accuracy.\nR300 features 3, pneumostatically supported, metrological measurement and positioning axes that ensure fluent movements without frictions and remarkable sturdiness of the entire system.\nThe main application of R300 consists in the characterization of large size bearings, where all those essential characteristics for the final quality of the product must be determined, among which roundness and race angles, which are measured by following the piece's profile with more axes working at the same time, thus generating a considerable number of measurements.\n\nCHARACTERISTICS:\n\nPneumostatic plate\nPlatform diameter: \t450 mm\nExpansion diameter: 800 mm\nMaximum measureable diameter: 1000 mm\nAxial bearing capacity: 1200 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: \t0,5 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm\nLevelling range: \t± 1°\nResolution: \t0,1°\n\nPneumostatic R axis\nUseful traverse length: 500 mm\nLinearity: ≤ 0,5 μm su 500 mm\nSpeed: 0,2 – 10 mm/s\nResolution: 0,1 μm\n\nC axis (pneumostatic column)\nUseful traverse length: 500 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution: 0,1 μm\n\nPick-up\nMeasurement positioning: In three positions (horizontal, vertical, lateral)\nMeasurement strenght : Internal/esternal 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional of lenght 80 - 150 – 240 mm\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "field", "bulky", "profile", "surfaces", "frictions", "same time", "experience", "race angles", "measurements", "heavy pieces", "thirty years", "best devices", "entire system", "R300 features", "final quality", "R300 SM Product", "utmost accuracy", "characterization", "positioning axes", "main application", "fluent movements", "large size bearings", "considerable number", "remarkable sturdiness", "R300 roundness tester", "metrological measurement", "essential characteristics", "R300 Laboratary Roundness Tester" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 29, "imageuri": "https://productimages.withfloats.com/actual/63c7c28845a22b0001e71c35.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c28845a22b0001e71c35.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:24:23.638Z", "updatedon": "2023-02-06T14:33:23Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r300-laboratary-roundness-tester/29", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness", "cylindricity", "large Size Bearings", "Laboratary Roundness Tester", "large size bearings" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6210c45e0f41fd000113694d", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "R250 Labortary Roundness Tester", "description": "R250 roundness tester was conceived from the need to characterize pieces with circular and even complex geometries with utmost accuracy, and it is the ideal instrument to satisfy multiple measurement needs in the mechanical, motor, aerospace and machine manufacturing industries.\nThanks to its solid structure consisting of a base made in diabase and pneumostatically supported plate, it can accurately measure pieces of also considerable weight.\nThe device is matched to Circom software that was conceived to be extremely user-friendly and easy to use, thus allowing to train an operator within a short period of time, reducing training and testing costs.\nThe software allows to analyze the following geometric tolerances: roundness, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, coaxiality, run out, total run out, thickness variation. For complex surfaces where gaps are present, Circom is able to eliminate them automatically or the operator can intervene manually, removing inconsistent profile sections.\nIntegrative packages can be added to the basic application, such as for example harmonic analysis that, through FFT algorithm, allows to analyze each single sinusoidal component of the measured profile, essential with regards to bearings.\n\nCHARACTERISTICS:\n\nPneumostatic plate\nPlatform diameter: \t450 mm\nExpansion diameter: 800 mm\nMaximum measureable diameter: 1000 mm\nAxial bearing capacity: 1200 kg\nRadial run-out (at plate level): ≤0,1 μm\nSpeed: 0,5 – 3 rpm (measurement) 0 – 6 rpm (positioning)\nFriction: Pneumostatic due to manual rotation\nCentring range: ±5 mm\nLevelling range: \t± 1°\nResolution: \t0,1°\n\nPneumostatic R axis\nUseful traverse length: \t500 mm\nLinearity: \t≤ 0,5 μm su 500 mm\nSpeed: \t0,2 – 10 mm/s\nResolution: \t0,1 μm\n\nC axis (pneumostatic column)\nUseful traverse length: 500 mm\nMaximum height : 600 mm (from plate surface)\nLinearity error: ≤ 0,5 μm on 500 mm\nSpeed : 0,5 – 15 mm/s\nResolution: 0,1 μm\n\nPick-up\nMeasurement positioning: In three positions (horizontal, vertical, lateral)\nMeasurement strenght : Internal/esternal 20 – 150 mN\nMeasurement range : ±1000 μm\nSupplied pick-ups : N° 3 two-directional of lenght 80 - 150 – 240 mm\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "time", "gaps", "base", "plate", "pieces", "device", "regards", "bearings", "conicity", "circular", "training", "operator", "aerospace", "linearity", "cone shape", "coaxiality", "parallelism", "cylindricity", "short period", "FFT algorithm", "concentricity", "testing costs", "R250 SM Product", "solid structure", "Circom software", "utmost accuracy", "complex surfaces", "ideal instrument", "basic application", "complex geometries", "thickness variation", "considerable weight", "Integrative packages", "R250 roundness tester", "example harmonic analysis", "multiple measurement needs", "single sinusoidal component", "inconsistent profile sections", "following geometric tolerances", "R250 Labortary Roundness Tester", "machine manufacturing industries" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 28, "imageuri": "https://productimages.withfloats.com/actual/63c7c6a37a4ce700014e17ba.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c6a37a4ce700014e17ba.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-02-19T10:20:14.172Z", "updatedon": "2023-02-06T14:35:05Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/r250-labortary-roundness-tester/28", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Roundness Tester", "tags": [ "roundness", "linearity", "cylindricity", "conicity", "concentricity", "parallelism", "coaxiality", "thickness variation", "Labortary Roundness Tester" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ec533161a94f90001258e05", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Profilometer PGS 200", "description": "PGS200 profilometer is an instrument of new generation, able with a few simple operations, to characterise the profile of also complex pieces, thanks to the modern “all in one” logic: with just a few operations, it is immediately ready and calibrated to take measurements. Profile Studio software installed on PGS200 was conceived to be extremely user-friendly and easy to use by the operator.\n\nThe functions required for the characterization of the profile are grouped into categories (points, line, arcs, sizes), each of different colour to be easily identified. The CAD is highly advanced: all items are dynamic and can be edited after being input.\n\nFor more complex pieces, PGS 200 allows to execute measurement cycles and therefore, obstacles are automatically overcome (grooves, shouldered parts), and the profile is reconstructed at the end of the measurement. Thanks to the motorized column, calibration takes place automatically like the measuring cycles, thus ensuring a remarkable saving of time and high flexibility.\n\nCHARACTERISTICS:\nMeasurement range in X: \t220 mm (8.66 in)\nMeasurement range in Z: 50 mm (1.97 in)\nResolution on the X axis: 0.5 μm (0.02 μin)\nResolution on the Z axis: 0.1 μm (0.008 μin)\nPositioning speed: 0 – 10 mm/s (0 – 0.4 in/s)\nMeasurement speed: 0.2 - 0.5 – 1 – 2 mm/s (0.008 - 0.02 – 0.04 – 0.08 in/s)\nTraverse length of column: Column with a positioning of 320 mm (12.6 in)  or 520 mm (20.5 in) manual or motorized CNC\nMeasurement tip: Tip radius 20 μm (0.8 μin) and front roundness\nCNC cycles: CNC automatic measurement and positioning cycles with self-comparison\nConnection: \tUSB interface towards Windows© PC\nLanguages: \tItalian, French, English, German, Spanish, Portuguese and Slovenian\nSizes LxDxH: 1100 x 570 x 720 mm (43.3 x 22.4 x 28.3 in)\nOverall weight: 42 kg(92 lbs)\nSoftware: Profile Studio\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 25, "imageuri": "https://productimages.withfloats.com/actual/63c7c61e1a09760001dbae63.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c7c61e1a09760001dbae63.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-05-20T13:39:34.352Z", "updatedon": "2024-07-03T14:00:58Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/profilometer-pgs-200/25", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Contour / Profilometer", "tags": [ "Contour", "CAD program" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5ea9a9c7f9dcce0001a0a27c", "fptag": "SALBROENGINEERS", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RT10 Palmtop Roughness Tester", "description": "RT10 roughness tester is the basic tester of the range. This instrument is ideal to measure pieces directly on work stations or production machinery. Thanks to its simplicity of use, it is ideal for the simple numeric characterization of the roughness of an object and boasts quick testing times. Thanks to the internal memory, simple handling and integrated battery, RT10 is ideal for taking measurements in difficult conditions, like in case of bulky or complex pieces.\n\nCHARACTERISTICS::\nMeasurement range: ±200μm\nResolution: 0,001 μm\nCut-off lenght: 0,25 – 0,8 - 2,5 mm\nCut-off number: Selectable from 1 to 5\nTraverse lenght: Up to 16 mm\nPick-up: \tInductive, it can be rotated of 90° for lateral measurements (with SB50 probe)\nMeasurement parameters: 11 parameters \n(Ra, Rq, Rt, Rz, Rc, RSm, Rmr, Rmax, RPc, Pt, R, AR, Rx)\nUnit of measurement: Millimetres and inches\nInterface: \tLCD, 132x32 monochromatic graphic display and 4 waterproof membrane buttons\nLanguages: \tItalian, French, English, German, Spanish, Portuguese\nMemory: \tUp to 1000 measurements\nAccessories: RT10 roughness tester, 1\n 10-230V battery charger, adjusting walls, \n 8 mm diameter end plug for connection to stand, \n roughness sample, Case, User Manual\n\nRT10 Plus (code 1.101). RT10 roughness tester is also available in the Plus version which features a plug-in connector that allows to interchange the pick-up, thus being able to take measurements on all types of surfaces, by simply mounting the most suitable pick-up.\n\nSalbro Engineers represents SM Metrology Systems for their surface metrology products such as \nRoundness, Roughness, Contour / Profile measuring machines and accessories.\n", "price": 1.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 22, "imageuri": "https://productimages.withfloats.com/actual/63c6713ef959db00013f5ab3.jpg", "tileimageuri": "https://productimages.withfloats.com/actual/63c6713ef959db00013f5ab3.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2020-04-29T16:22:31.915Z", "updatedon": "2024-07-03T14:00:21Z", "buyonlinelink": null, "producturl": "http://WWW.SALBROENGINEERS.COM/products/rt10-palmtop-roughness-tester/22", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SM Metrology Systems", "category": "Surface Roughness Tester", "tags": [ "Surface Roughness", "Portable", "Roughnesss", "Ra", "Rz", "Rt", "Roughness Tester", "Roughness Measurement" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "AssuredPurchase", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }