SALBROENGINEERS Products
Mumbai salbroengrs@gmail.com
91+919833904479
Chat with us  

Chat with us on WhatsApp

×
Preview

This is your website preview.

Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.

SALBROENGINEERS 5954e9473576cd05187e322f Products https://www.salbroengineers.com
Home
products
Quote
Menu

Manufacturing test

Home Products

Our Products

RT10G roughness tester was born from the success obtained by RT10; easy to handle and reliable like the basic version, it also carries out advanced analyses typical of a laboratory instrument.In addition to 31 roughness parameters calculated, RT10G displays the graphs of the roughness profile, primary profile, bearing capacity curves, distribution of ordinates, and allows to set tolerances on single parameters and personalize prints. RT10G uses new generation electronics with 0.001 µm resolution that ensure always reliable results and displays them in a user-friendly fashion, thanks to the internal icon menus taken from modern Smartphones.CHARACTERISTICS:Measurement range: ±300μmResolution: 0,001 μmCut-off Lenght: 0,25 – 0,8 - 2,5 mmCut-off number: Selectable from 1 to 5Traverse lenght: Up to 16 mmPick-up: Inductive, it can be rotated of 90° for lateral measurements (with SB50 probe)Measurement parameters: 31 parameters (Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsm, Rdc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, RPc, PPc – Rk, Rpk, Pvk, Mr1, Mr2 – Pt, R, Rx, AR-R3, R3zm, Rmax)Graphs displayed: Roughness, primary, bearing capacity curve, and distribution of ordinatesUnit of measurement: Millimetres and inchesInterface: TFT, 2’’ colour graphic display and 4 lateral waterproof membrane buttonsLanguages: Italian, French, English, German, Spanish and PortugueseMemory: Up to 1000 measurementsAccessories: RT10G roughness tester, 110-230V battery charger, adjusting walls, 8 mm diameter end plug for connection to stand, roughness sample, Case, User Manual.Salbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.
RT10G Palmtop graphic roughness tester

INR 1

VIEW DETAILS
RTP80 roughness tester, easy to handle and user-friendly, allows to characterize even the most complex surfaces, easily and conveniently. The shiny 5.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances can be printed immediately using the thermal printer built in the instrument. The graphs and parameters are all of interactive type, to allow the operator to choose how to present the results. RTP80 is suitable for production departments, where the measurement settings for batch analyses can be protected by password, and it is also ideal to be used in metrological laboratories where statistical analyses can be carried out on the measurements taken. RTP80 calculation unit can be connected up to 4 measurement translators for various types of pieces.CHARACTERISTICS:Measurement range: ±500μm ( TL90 )Resolution: 0,001 μmCut-off lenght: 0,25 – 0,8 - 2,5 - 8 mmCut-off number: Selectable from 1 to 19Traverse lenght: Up to 50 mm ( TL90 )Pick-up: Inductive, it can be rotated of 90° for lateral measurementsPrinter: Integrated, thermal printerMeasurement parameters:54 parameters(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsk, Rku, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, Pdc, PPc, R, Rx, AR, Wte, W, AW, Wx, Rke, Rpke, Rvke, Mr1e, Mr2e Rmax, R3z, R3zm)Graphs displayed: Roughness, waviness, primary, bearing capacity curve, and distribution of Ordinates.Unit of measurement: Millimeters and inchesInterface: TFT, 5.7'' colour graphic Touchscreen display and 3 waterproof membrane buttonsLanguages: Italian, French, English, German, Spanish, PortugueseMemory: Up to 1000 measuresAccessories: RTP80 roughness tester, Translator (TS4, TS7, TL90, Rotarix 55 or Rotarix 125), 110-230V battery charger, roughness sample, case, user manualCONNECTABLE TRANSLATORS:TS7Compact and easy to handle translator, it allows taking measurements in the most difficult conditions, by simply holding it in one hand. Maximum traverse length of 25 mmTL90Professional translator with internal metrological reference that allows characterizing W waviness parametersPositioning micrometrics on the piece, with traverse length of 110 mm, bistable nib for measurements with and without skid. Maximum traverse length of 50 mm.ROTARIX 55Rotary unit with horizontal axis for measuring radial roughness (e.g. pipes, balls) on medium-size pieces, measurement diameter from Ø3 ÷ Ø60 mm.ROTARIX 125Rotary unit with vertical axis for measuring radial roughness on bulky pieces, measurement diameter from Ø10 ÷ Ø160 mm.Salbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.
RTP80 Portable roughness tester

INR 1

VIEW DETAILS
Measure your components by us for various parameters on our Roundness Tester at reasonable charges. Our machines are calibrated using NABL certified Standards / Specimen. The best temporary solution before you invest to purchase your own machine.Contact us for measurement of your components.
Measurement Services - Roundness

INR 1

VIEW DETAILS
LITEsurf SM Product The new LITEsurf roughness tester was born from the forty-year experience that SM has in measuring and designing roughness tester for production areas. This is why we know well what are the characteristics that are really necessary for an instrument of this family that has to go to work there right with you: compactness, robustness, ease of use and clarity of the results, these are the characteristics that they will make LITEsurf the ideal partner for roughness characterizing on your parts. Are you considering buying a new palmtop roughness tester? We accept the challenge, because we are sure that the new LITEsurf roughness tester is a step forward compared to the other opponents! Are you not convinced? We give you 5 good reasons!Connectivity: Today technology allows us to share information quickly and easily, can your new roughness tester do it? The new LITEsurf, thanks to the integrated Bluetooth and USB connection, allows you to connect the smartphones, tablets and PCs in an intuitive and fast way, then sharing information with the rest of the world.Flexibility: you want, with a single instrument, to measure zones horizontally, vertically, up / down or sideways, many will answer you impossible, but LITEsurf can do all this. Through the probe rotatable laterally by 90 ° and to the balanced and preloaded sensor, each area of the piece can be measured.
LITEsurf Palmtop Roughness

INR 1

VIEW DETAILS
The PGS100 profilometer allows to acquire 2D profiles in an extremely simple and intuitive way, thanks also to its measuring range of 130 mm in length (X) and 50 mm in height (Z).The use of the tool takes place through the commands given by the software or from the PC keyboard in a very intuitive way.The Profile Studio analysis program is equipped with all the CAD functions necessary for the dimensioning of your pieces, it also allows you to create programs to automate the characterization of the elements, for example during series measurements.The standard configuration that includes the worktable with
PGS100 Profilometer

INR 1

VIEW DETAILS
WARPsurf SM ProductThe WARPsurf is a turning point in the world panorama of the instruments for surface analysis, because it gives in a single portable instrument the capability to perform both roughness and profilometry analysis.The brilliant 7’’ touch screen display, combined with modern user interface, allows the user to become quickly familiar with the instrument, setting easily the measure parameters, positioning on the piece and performing the analysis.The instrument is equipped with a 1GHz microprocessor that allows to have a fluid system and fast processing even with complex profiles.Extremely compact and handy, the WARPsurf allows to position easily on big pieces thanks to the integrated micrometric that covers 110 mm range.Thanks to the standard USB interface, it is possible to plug a regular USB drive to save images or PDF reports; using this interface the instrument can connect to a common desktop printer and directly print on A4.The instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.
WARPsurf

INR 1

VIEW DETAILS
ROUNDNESS SPECIMENSSpecimens are available for calibration and the functional check of instruments, specifically studied for roundness testers; upon request calibration certificates are released.In general, three specimens are used on roundness testers:- Specimen sphere or hemisphere in steel or optical glass that allows to quantify and check the plate’s rotary oscillations, and therefore adjust the error- Guizzo specimen that allows to calibrate and check the pick-ups’ sensitivity, through a radial known groove- The specimen cylinder made in steel or granite, that thanks to its utmost cylindricity accuracy, allows to align the column of the roundness testers to the plate’s axis, and to check precision during movement.
ROUNDNESS SPECIMENS

INR 1

VIEW DETAILS
R500 SM Product R500 roundness tester is located at the top of machines for the characterization of revolution surfaces in the world panorama for what concerns the maximum dimensions of the object that can be measured; born from the thirty year experience that SM has in this field, it has been designed to measure bulky and heavy pieces, maintaining high accuracies.R500 features 3 metrological axes, pneumostatically supported, for measurement and positioning, which ensure fluent movements without frictions and remarkable sturdiness of the entire system.The flagship application of R500 is the characterization of bulky particulars in the energy sector (turbines, compressors, bearings) where all the essential characteristics for the final quality of the product must be determined.The motorized plate allows the automatic centering of the piece, executed with a procedure inside the Circom software.
R500 Roundness Tester

INR 1

VIEW DETAILS
R300 SM ProductR300 roundness tester is one of the best devices worldwide for the characterization of surfaces, born from thirty years of experience boasted by SM in this field, it was specifically designed to measure bulky and heavy pieces, with utmost accuracy.R300 features 3, pneumostatically supported, metrological measurement and positioning axes that ensure fluent movements without frictions and remarkable sturdiness of the entire system.The main application of R300 consists in the characterization of large size bearings, where all those essential characteristics for the final quality of the product must be determined, among which roundness and race angles, which are measured by following the piece's profile with more axes working at the same time, thus generating a considerable number of measurements.
R300 Laboratary Roundness Tester

INR 1

VIEW DETAILS
R250 SM Product R250 roundness tester was conceived from the need to characterize pieces with circular and even complex geometries with utmost accuracy, and it is the ideal instrument to satisfy multiple measurement needs in the mechanical, motor, aerospace and machine manufacturing industries.Thanks to its solid structure consisting of a base made in diabase and pneumostatically supported plate, it can accurately measure pieces of also considerable weight.The device is matched to Circom software that was conceived to be extremely user-friendly and easy to use, thus allowing to train an operator within a short period of time, reducing training and testing costs.The software allows to analyze the following geometric tolerances: roundness, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, coaxiality, run out, total run out, thickness variation. For complex surfaces where gaps are present, Circom is able to eliminate them automatically or the operator can intervene manually, removing inconsistent profile sections.Integrative packages can be added to the basic application, such as for example harmonic analysis that, through FFT algorithm, allows to analyze each single sinusoidal component of the measured profile, essential with regards to bearings.
R250 Labortary Roundness Tester

INR 1

VIEW DETAILS
Note*-Machines displayed are Products/property of respective Manufactures.Machine Pictures used are to state compatibility of our Retrofit Packages only.Pre Owned Talysurf 5 – Retrofitted with SeSurf Ready for Immediate Dispatch• Five Traverse Speeds 0.05mm to 2.5mm per sec• 120mm mechanical Datum Traverse for Skid & No Skid• Motorised Column Stand• Stylus Range: 1000 um• Three Filter Modes: Gaussian, 2CR & 2CR PC• Five Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm• Analysis of Profile, Unfiltered, Roughness & Waviness• Resolution: 0,01 / 0.001 & 0.0001μm • Section Remove to delete un wanted data • Hard Coded User Logo, Name, Location etc• Five fields for entering Job details• Specials: Auto Save, Excel Export with Statistical. Parameters & More Talysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. Effective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.SeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.SeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.Talysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.
Talysurf5_SeSurf Retrofit Package

INR 1

VIEW DETAILS
The new profilometer PGS 200 combines the need to have a highly versatile tool, which ensures ease of installation in production environments, however, that in measuring rooms to ensure the accuracy of the measures to be always certain of the results obtained. With the concept
Profilometer PGS 200

INR 1

VIEW DETAILS

Filter using tags

Measure ComponentsMeasure Balls for RoughnessMeasure Components for RoughnessMeasurement ServiceRaRzRoughness ParameteresRoughness MeasurementWaviness AnalysisWaviness MeasurementRoller Camber MeasurementRoller Camber Analysis programRoller Camber AssesmentelectionVoting MachineDigital VotingCandidateselectronic votingElectronic Voting MachineEVMVoteElection voting MachineCo-Op Bank ElectionRoughnesssSurface RoughnessPalmtop RoughnessSurface MetrologyRoughness Testersurface analysisPortable Roughness TesterWARPsurfroughness parametersRoughnessWavinessDominant wavinessMaterial ratio curve (bearing)height amplitude distributionroughness averageroundnessConcentricityParallelismCylindricityDiameterPerpendicularityThickness variationNew Roundness and Cylindricityroundness testerRoundness Measuringroundness measurementCylindricity measurementStraightnessbearing ratio curveraunfiltered profileGaussian Filter2CR filterDigital filtersMachine controlPre-owned MachinesRetrofit PakageSurface Roughness & Waviness Retrofitsurface roughness retrofitAnalysis softwareAnalysisRoughness AverageRetrofitBearingRadial PlayRadialEmbeddedADCPlunger ProbeBearing Radial ClearanceData Logger SystemEmbedded systemEmbedded codingLan Remote ConnectRollersRingsBearingsCamberMeasurement ServicesCalibrationContour MeasurementContour Machine CalibrationCalibrateCAD programCAD functionsRoundness Teste Retrofit PackageLaboratary Roundness TesterUpgraded SoftwareFlatnessRelative EccentricityeccentricitysquarenessVelocity AnalysisHarmonicsAxial RunoutRadial RunoutRtBallsPortableContourTalysurf5120mm TraverseRetrofitted machinesSeSurf Retrofit PackageOn SaleSurface FinishRoughness Meanlarge Size Bearings measurementForm Measurementturbines measurementcompressors measurementRoundnessCylindricity with RoundnesscoaxialityspherocitySKF Waviness Analysistotal run outrun-outPortable RoughnessTalysurf4Transperant, Reliable, RobustLinear GraphFFT algorithumLSCMICMCCMZCSpecimen hemisphereGuizzo specimenSpecimen cylindercalibrate sensitivityGlass HemisphereMaster CylinderSoccerTrainerGoal Keeper TrainerFootball Trainer machinefootballTrainlinearitycylindricityconicityconcentricityparallelismthickness variationLabortary Roundness TestercontourProfile Studio softwareElectionVVPATEVM RentalsEVM for HireEVM on RentSoccer Trainerunmanned systemfootball practiSurface Parallelismharmonicsdata accusitionBest Fit CurveBest Fit LineSlope RemovalProfilometersAutomatic CNC positioningAutomatic CNC measuringPortable Surface Roughness TesterTransparent ResultsElectronic Votingvotemultiple votingnon tamperableEVM manufacturerElection voting SystemVoting SystemsFlatnesssParkingParking SolutionsParking managementUnmanned Parkingparking lotParking assistanceVotingVoting CenterVoting BoothMultiple VotingTalyrond 252SeRoundISO standardsISO 13565-1Radial ClearanceBrearing PlayDataloggerLog DataMultiple Category Votinglarge Size Bearingslarge size bearingsCylindricity With RoundnessMulti Profile PlotWave Amplitude ControlcamberHeight
RT10G roughness tester was born from the success obtained by RT10; easy to handle and reliable like the basic version, it also carries out advanced analyses typical of a laboratory instrument.In addition to 31 roughness parameters calculated, RT10G displays the graphs of the roughness profile, primary profile, bearing capacity curves, distribution of ordinates, and allows to set tolerances on single parameters and personalize prints. RT10G uses new generation electronics with 0.001 µm resolution that ensure always reliable results and displays them in a user-friendly fashion, thanks to the internal icon menus taken from modern Smartphones.CHARACTERISTICS:Measurement range: ±300μmResolution: 0,001 μmCut-off Lenght: 0,25 – 0,8 - 2,5 mmCut-off number: Selectable from 1 to 5Traverse lenght: Up to 16 mmPick-up: Inductive, it can be rotated of 90° for lateral measurements (with SB50 probe)Measurement parameters: 31 parameters (Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsm, Rdc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, RPc, PPc – Rk, Rpk, Pvk, Mr1, Mr2 – Pt, R, Rx, AR-R3, R3zm, Rmax)Graphs displayed: Roughness, primary, bearing capacity curve, and distribution of ordinatesUnit of measurement: Millimetres and inchesInterface: TFT, 2’’ colour graphic display and 4 lateral waterproof membrane buttonsLanguages: Italian, French, English, German, Spanish and PortugueseMemory: Up to 1000 measurementsAccessories: RT10G roughness tester, 110-230V battery charger, adjusting walls, 8 mm diameter end plug for connection to stand, roughness sample, Case, User Manual.Salbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.
View Details
RT10G Palmtop graphic ro

INR 1

RTP80 roughness tester, easy to handle and user-friendly, allows to characterize even the most complex surfaces, easily and conveniently. The shiny 5.7’’ colour touchscreen display combined to the icon interface, allows the operator to set the measurement parameters, moving on the piece and carrying out the analysis quickly. The results obtained and the relative tolerances can be printed immediately using the thermal printer built in the instrument. The graphs and parameters are all of interactive type, to allow the operator to choose how to present the results. RTP80 is suitable for production departments, where the measurement settings for batch analyses can be protected by password, and it is also ideal to be used in metrological laboratories where statistical analyses can be carried out on the measurements taken. RTP80 calculation unit can be connected up to 4 measurement translators for various types of pieces.CHARACTERISTICS:Measurement range: ±500μm ( TL90 )Resolution: 0,001 μmCut-off lenght: 0,25 – 0,8 - 2,5 - 8 mmCut-off number: Selectable from 1 to 19Traverse lenght: Up to 50 mm ( TL90 )Pick-up: Inductive, it can be rotated of 90° for lateral measurementsPrinter: Integrated, thermal printerMeasurement parameters:54 parameters(Ra, Rq, Rt, Rz, Rp, Rc, Rv, Rsk, Rku, Rsm, Rdc, RPc, Pa, Pq, Pt, Pp, Pc, Pv, Psm, Pdc, PPc, Wa, Wq, Wt, Wz, Wp, Wv, Wc, WSm, Wdc, WPc, Rk, Rpk, Pvk, Mr1, Mr2, Pt, Pdc, PPc, R, Rx, AR, Wte, W, AW, Wx, Rke, Rpke, Rvke, Mr1e, Mr2e Rmax, R3z, R3zm)Graphs displayed: Roughness, waviness, primary, bearing capacity curve, and distribution of Ordinates.Unit of measurement: Millimeters and inchesInterface: TFT, 5.7'' colour graphic Touchscreen display and 3 waterproof membrane buttonsLanguages: Italian, French, English, German, Spanish, PortugueseMemory: Up to 1000 measuresAccessories: RTP80 roughness tester, Translator (TS4, TS7, TL90, Rotarix 55 or Rotarix 125), 110-230V battery charger, roughness sample, case, user manualCONNECTABLE TRANSLATORS:TS7Compact and easy to handle translator, it allows taking measurements in the most difficult conditions, by simply holding it in one hand. Maximum traverse length of 25 mmTL90Professional translator with internal metrological reference that allows characterizing W waviness parametersPositioning micrometrics on the piece, with traverse length of 110 mm, bistable nib for measurements with and without skid. Maximum traverse length of 50 mm.ROTARIX 55Rotary unit with horizontal axis for measuring radial roughness (e.g. pipes, balls) on medium-size pieces, measurement diameter from Ø3 ÷ Ø60 mm.ROTARIX 125Rotary unit with vertical axis for measuring radial roughness on bulky pieces, measurement diameter from Ø10 ÷ Ø160 mm.Salbro Engineers represents SM Metrology Systems for their surface metrology products such as Roundness, Roughness, Contour / Profile measuring machines and accessories.
View Details
RTP80 Portable roughness

INR 1

Measure your components by us for various parameters on our Roundness Tester at reasonable charges. Our machines are calibrated using NABL certified Standards / Specimen. The best temporary solution before you invest to purchase your own machine.Contact us for measurement of your components.
View Details
Measurement Services - R

INR 1

LITEsurf SM Product The new LITEsurf roughness tester was born from the forty-year experience that SM has in measuring and designing roughness tester for production areas. This is why we know well what are the characteristics that are really necessary for an instrument of this family that has to go to work there right with you: compactness, robustness, ease of use and clarity of the results, these are the characteristics that they will make LITEsurf the ideal partner for roughness characterizing on your parts. Are you considering buying a new palmtop roughness tester? We accept the challenge, because we are sure that the new LITEsurf roughness tester is a step forward compared to the other opponents! Are you not convinced? We give you 5 good reasons!Connectivity: Today technology allows us to share information quickly and easily, can your new roughness tester do it? The new LITEsurf, thanks to the integrated Bluetooth and USB connection, allows you to connect the smartphones, tablets and PCs in an intuitive and fast way, then sharing information with the rest of the world.Flexibility: you want, with a single instrument, to measure zones horizontally, vertically, up / down or sideways, many will answer you impossible, but LITEsurf can do all this. Through the probe rotatable laterally by 90 ° and to the balanced and preloaded sensor, each area of the piece can be measured.
View Details
LITEsurf Palmtop Roughne

INR 1

The PGS100 profilometer allows to acquire 2D profiles in an extremely simple and intuitive way, thanks also to its measuring range of 130 mm in length (X) and 50 mm in height (Z).The use of the tool takes place through the commands given by the software or from the PC keyboard in a very intuitive way.The Profile Studio analysis program is equipped with all the CAD functions necessary for the dimensioning of your pieces, it also allows you to create programs to automate the characterization of the elements, for example during series measurements.The standard configuration that includes the worktable with
View Details
PGS100 Profilometer

INR 1

WARPsurf SM ProductThe WARPsurf is a turning point in the world panorama of the instruments for surface analysis, because it gives in a single portable instrument the capability to perform both roughness and profilometry analysis.The brilliant 7’’ touch screen display, combined with modern user interface, allows the user to become quickly familiar with the instrument, setting easily the measure parameters, positioning on the piece and performing the analysis.The instrument is equipped with a 1GHz microprocessor that allows to have a fluid system and fast processing even with complex profiles.Extremely compact and handy, the WARPsurf allows to position easily on big pieces thanks to the integrated micrometric that covers 110 mm range.Thanks to the standard USB interface, it is possible to plug a regular USB drive to save images or PDF reports; using this interface the instrument can connect to a common desktop printer and directly print on A4.The instrument can analyze surface features along with dimensional ones, thanks to the interchangeable styluses for both roughness and profilometry.
View Details
WARPsurf

INR 1

ROUNDNESS SPECIMENSSpecimens are available for calibration and the functional check of instruments, specifically studied for roundness testers; upon request calibration certificates are released.In general, three specimens are used on roundness testers:- Specimen sphere or hemisphere in steel or optical glass that allows to quantify and check the plate’s rotary oscillations, and therefore adjust the error- Guizzo specimen that allows to calibrate and check the pick-ups’ sensitivity, through a radial known groove- The specimen cylinder made in steel or granite, that thanks to its utmost cylindricity accuracy, allows to align the column of the roundness testers to the plate’s axis, and to check precision during movement.
View Details
ROUNDNESS SPECIMENS

INR 1

R500 SM Product R500 roundness tester is located at the top of machines for the characterization of revolution surfaces in the world panorama for what concerns the maximum dimensions of the object that can be measured; born from the thirty year experience that SM has in this field, it has been designed to measure bulky and heavy pieces, maintaining high accuracies.R500 features 3 metrological axes, pneumostatically supported, for measurement and positioning, which ensure fluent movements without frictions and remarkable sturdiness of the entire system.The flagship application of R500 is the characterization of bulky particulars in the energy sector (turbines, compressors, bearings) where all the essential characteristics for the final quality of the product must be determined.The motorized plate allows the automatic centering of the piece, executed with a procedure inside the Circom software.
View Details
R500 Roundness Tester

INR 1

R300 SM ProductR300 roundness tester is one of the best devices worldwide for the characterization of surfaces, born from thirty years of experience boasted by SM in this field, it was specifically designed to measure bulky and heavy pieces, with utmost accuracy.R300 features 3, pneumostatically supported, metrological measurement and positioning axes that ensure fluent movements without frictions and remarkable sturdiness of the entire system.The main application of R300 consists in the characterization of large size bearings, where all those essential characteristics for the final quality of the product must be determined, among which roundness and race angles, which are measured by following the piece's profile with more axes working at the same time, thus generating a considerable number of measurements.
View Details
R300 Laboratary Roundnes

INR 1

R250 SM Product R250 roundness tester was conceived from the need to characterize pieces with circular and even complex geometries with utmost accuracy, and it is the ideal instrument to satisfy multiple measurement needs in the mechanical, motor, aerospace and machine manufacturing industries.Thanks to its solid structure consisting of a base made in diabase and pneumostatically supported plate, it can accurately measure pieces of also considerable weight.The device is matched to Circom software that was conceived to be extremely user-friendly and easy to use, thus allowing to train an operator within a short period of time, reducing training and testing costs.The software allows to analyze the following geometric tolerances: roundness, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, coaxiality, run out, total run out, thickness variation. For complex surfaces where gaps are present, Circom is able to eliminate them automatically or the operator can intervene manually, removing inconsistent profile sections.Integrative packages can be added to the basic application, such as for example harmonic analysis that, through FFT algorithm, allows to analyze each single sinusoidal component of the measured profile, essential with regards to bearings.
View Details
R250 Labortary Roundness

INR 1

Note*-Machines displayed are Products/property of respective Manufactures.Machine Pictures used are to state compatibility of our Retrofit Packages only.Pre Owned Talysurf 5 – Retrofitted with SeSurf Ready for Immediate Dispatch• Five Traverse Speeds 0.05mm to 2.5mm per sec• 120mm mechanical Datum Traverse for Skid & No Skid• Motorised Column Stand• Stylus Range: 1000 um• Three Filter Modes: Gaussian, 2CR & 2CR PC• Five Filter Cut Offs: 0.08, 0.25, 0.8, 2.5 & 8mm• Analysis of Profile, Unfiltered, Roughness & Waviness• Resolution: 0,01 / 0.001 & 0.0001μm • Section Remove to delete un wanted data • Hard Coded User Logo, Name, Location etc• Five fields for entering Job details• Specials: Auto Save, Excel Export with Statistical. Parameters & More Talysurf5 with SeSurf computer Interface/ Retrofit is a laboratory standard with ruggedness and easy to use. The Software is User friendly but powerful. The Talysurf5 instrument maintains a high level of measurement accuracy and performance reliability, but is available at minimum capital investment. The Granite Base Tee slots are pre aligned to the Pick Up Stylus tip for easy alignment of the job under test. The Manual Column allows to measure up to 350mm above the Base surface. SeSurf allows the user to make measurements, analyze them and even re- analyze them to any other conditions and parameters at any later date in the future, thus decreasing Time and improving Productivity. Effective surface characterization requires accurate acquisition of data, coupled with appropriate analysis. Traditional measurement methods have reported only surface roughness, providing an incomplete picture of the surface texture, which comprises a matrix of complex, interrelated characteristics. SeSurf incorporates the best industry Standards for data analysis. Unfiltered profiles can be analyzed for Roughness, Waviness with cutoff wave lengths of 0.08 mm, 0.25 mm, 0.8 mm, 2.5 mm, 8 mm in 3 digital filters wiz: Gaussian, 2CR and 2CR PC (Phase Corrected). SeSurf also provides an option for data to be analyzed with a combination of both Roughness and Waviness.SeSurf provides 22 different Unfiltered Profile parameters, 26 Roughness and Waviness parameters.SeSurf’s Bearing Ratio curve enables the user to asses’ contact/area at a given depth from profile height in percentage to the assessment length. Parameters assessed are Tp1, Tp2, Htp, Rmr, Rk, Rpk, Rvk, HSC and Pc.Talysurf5 with SeSurf Retrofit Package comes with a 12 month warranty period.
View Details
Talysurf5_SeSurf Retrofi

INR 1

The new profilometer PGS 200 combines the need to have a highly versatile tool, which ensures ease of installation in production environments, however, that in measuring rooms to ensure the accuracy of the measures to be always certain of the results obtained. With the concept
View Details
Profilometer PGS 200

INR 1

  • Filter Using Product Tags

Measure Components |Measure Balls for Roughness |Measure Components for Roughness |Measurement Service |Ra |Rz |Roughness Parameteres |Roughness Measurement |Waviness Analysis |Waviness Measurement |Roller Camber Measurement |Roller Camber Analysis program |Roller Camber Assesment |election |Voting Machine |Digital Voting |Candidates |electronic voting |Electronic Voting Machine |EVM |Vote |Election voting Machine |Co-Op Bank Election |Roughnesss |Surface Roughness |Palmtop Roughness |Surface Metrology |Roughness Tester |surface analysis |Portable Roughness Tester |WARPsurf |roughness parameters |Roughness |Waviness |Dominant waviness |Material ratio curve (bearing) |height amplitude distribution |roughness average |roundness |Concentricity |Parallelism |Cylindricity |Diameter |Perpendicularity |Thickness variation |New Roundness and Cylindricity |roundness tester |Roundness Measuring |roundness measurement |Cylindricity measurement |Straightness |bearing ratio curve |ra |unfiltered profile |Gaussian Filter |2CR filter |Digital filters |Machine control |Pre-owned Machines |Retrofit Pakage |Surface Roughness & Waviness Retrofit |surface roughness retrofit |Analysis software |Analysis |Roughness Average |Retrofit |Bearing |Radial Play |Radial |Embedded |ADC |Plunger Probe |Bearing Radial Clearance |Data Logger System |Embedded system |Embedded coding |Lan Remote Connect |Rollers |Rings |Bearings |Camber |Measurement Services |Calibration |Contour Measurement |Contour Machine Calibration |Calibrate |CAD program |CAD functions |Roundness Teste Retrofit Package |Laboratary Roundness Tester |Upgraded Software |Flatness |Relative Eccentricity |eccentricity |squareness |Velocity Analysis |Harmonics |Axial Runout |Radial Runout |Rt |Balls |Portable |Contour |Talysurf5 |120mm Traverse |Retrofitted machines |SeSurf Retrofit Package |On Sale |Surface Finish |Roughness Mean |large Size Bearings measurement |Form Measurement |turbines measurement |compressors measurement |Roundness |Cylindricity with Roundness |coaxiality |spherocity |SKF Waviness Analysis |total run out |run-out |Portable Roughness |Talysurf4 |Transperant, Reliable, Robust |Linear Graph |FFT algorithum |LSC |MIC |MCC |MZC |Specimen hemisphere |Guizzo specimen |Specimen cylinder |calibrate sensitivity |Glass Hemisphere |Master Cylinder |Soccer |Trainer |Goal Keeper Trainer |Football Trainer machine |football |Train |linearity |cylindricity |conicity |concentricity |parallelism |thickness variation |Labortary Roundness Tester |contour |Profile Studio software |Election |VVPAT |EVM Rentals |EVM for Hire |EVM on Rent |Soccer Trainer |unmanned system |football practi |Surface Parallelism |harmonics |data accusition |Best Fit Curve |Best Fit Line |Slope Removal |Profilometers |Automatic CNC positioning |Automatic CNC measuring |Portable Surface Roughness Tester |Transparent Results |Electronic Voting |vote |multiple voting |non tamperable |EVM manufacturer |Election voting System |Voting Systems |Flatnesss |Parking |Parking Solutions |Parking management |Unmanned Parking |parking lot |Parking assistance |Voting |Voting Center |Voting Booth |Multiple Voting |Talyrond 252 |SeRound |ISO standards |ISO 13565-1 |Radial Clearance |Brearing Play |Datalogger |Log Data |Multiple Category Voting |large Size Bearings |large size bearings |Cylindricity With Roundness |Multi Profile Plot |Wave Amplitude Control |camber |Height

Products Categories

Have any question or need any business consultation?

Contact Us

Have any question or need any business consultation?

Contact Us
Chat with us  

Recently updated products

Opening Hours

    Subscribe Us

    Subscribe to our newsletter!
    SALBRO ENGINEERS

    Social share